New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Orlando
Window replacement in Orlando comes down to one hard truth: the sun, humidity, and hurricane season will find every weak seal faster here than almost anywhere else in the country. We’re Juniper Windows Orlando, and we handle full frame replacements, insert windows, and glass-only swaps every week across the metro – from Conway to Baldwin Park to Pine Hills. If your windows are fogged, drafty, or fighting your AC bill, call us at (850) 679-8554 and we’ll give you a written price before any work starts. No vague estimates. No door-knob surprises.
Why Juniper Windows Orlando Is Orlando’s Preferred Window Replacement Company
Orlando homeowners call us because we treat window replacement the way they’d expect a modern service to work. You book, you get a live arrival time you can track, our background-checked technician shows up in a uniform, and you get before-and-after photos of the job. Every project is governed by two commitments: a written price before work starts, and the 365-Day Done Right Promise covering parts and labor in writing for a full year.
Sean Mackey leads our Orlando team, and he’s built the operation around a simple standard: if the work isn’t right, we make it right. Free second visit if a repair fails. No charge, no argument. That’s the Relay Standard, and it’s how we’ve earned a strong local reputation with homeowners who’ve been burned by vague quotes and no-show contractors before.
We’re a windows-and-doors specialist inside the Relay Home Co. family, founded in 2001. We don’t do kitchens, we don’t do roofs, we don’t do general remodeling. Window replacement and door replacement only. That focus means our Orlando crews have seen every failure mode this climate can throw at a window, and we know which fixes are worth your money.
Window Repair in Orlando
Window repair in Orlando often means addressing what Florida’s humidity and UV exposure do to seals, rollers, and coated glass long before a full replacement is necessary. In a 1980s Conway home, that might be a sliding glass door with corroded aluminum tracks and rollers that grind to a halt. In a 2005 Baldwin Park house, it’s usually a failed low-E coating that’s turned the glass hazy and let the afternoon sun cook the living room. Repair costs in Orlando typically run $150 for a roller and track service up to $450 for a full glass unit replacement in an existing sash.
Seal and Roller Service
A window that rattles, sticks, or whistles during the summer afternoon storms usually needs mechanical attention, not a whole new unit. We replace failed rollers on sliding doors, re-align sashes, and swap worn weatherstripping that’s letting humid air in. This is the most common repair call we get from Orlando’s 2000s stucco subdivisions, where builder-grade aluminum doors start jamming within a decade.
Low-E Coating and Glass Unit Replacement
Post-2004 impact-rated windows throughout Orlando were built to meet stricter wind-load codes, but many now show premature low-E coating failure from intense sun exposure. The frames are often structurally fine. We can swap just the insulated glass unit to a new low-E option with a proper Solar Heat Gain Coefficient, restoring clarity and cutting heat gain without touching the existing jamb or sash.
Window Replacement Company in Orlando
As a window replacement company serving Orlando, we handle the full spectrum: full frame replacement, insert window replacement, and energy-efficient upgrades on homes ranging from 1970s concrete block to post-2004 code-compliant construction. Full frame replacement in Orlando typically runs $850 to $1,500 per opening for a standard vinyl window, installed. Insert replacement, where the existing frame is sound, usually runs $500 to $900 per opening. Impact-rated upgrades add $300 to $600 per window depending on size and product line.
Full Frame Replacement
When a 1970s-90s concrete block home in Pine Hills still has original single-pane aluminum windows, the frame itself is usually too far gone for an insert. We tear out the old frame to the rough opening, inspect for hidden water damage from wind-driven rain, and install a properly flashed, air-tight replacement. This is the fix that actually stops the leak, not just masks it.
Insert Window Replacement
In Orlando’s newer communities like Baldwin Park, many homeowners have builder-grade vinyl frames that are structurally fine but holding underperforming glass. An insert replacement keeps the existing frame and jamb intact while swapping in a high-efficiency, impact-rated or low-E window. It’s faster, cleaner, and typically 30% to 40% less expensive than full frame work.
Trusted Brands We Service in Orlando
We carry eight product lines so the right window for an Orlando home is never a compromise. Our local customers most often choose CWS for impact-rated single-hung and casement styles, ES Windows for clean sightlines on modern stucco homes, and Mr-Glass when replacement insulated glass units are needed without changing the frame. We keep local inventory in Orlando, which means faster turnaround when a glass unit fails and you need a fast, correct replacement. If you’ve got an existing PGT or Therma-Tru product, we service those too, alongside CGI, ECO Window Systems, and ViewLux. You tell us what’s on the wall now, and we’ll give you the straight answer on repair versus replace.
Common Window Replacement Problems We See in Orlando Homes
- Low-E coating failure in post-2004 homes. The intense Florida sun breaks down builder-grade low-E coatings fast, leaving glass hazy and less energy-efficient. The frame is usually fine. The glass is not.
- Corroded sliding glass door tracks in 2000s stucco subdivisions. Builder-grade aluminum doors lose their rollers and jam within a decade in Orlando’s humidity. Air leaks around the track and your AC pays for it.
- Wind-driven rain intrusion in concrete block homes. Improperly installed retrofit windows from the 1970s-90s era let water around the jamb, rotting interior drywall and feeding hidden mold. This one gets expensive if you wait.
- Single-pane aluminum windows in older Orlando neighborhoods. Conway, Pine Hills, and similar areas are full of original single-pane aluminum windows that conduct heat and leak air. Replacement here is a comfort upgrade, not a cosmetic one.
Pricing for Window Replacement in Orlando, FL
Here are straight numbers for the Orlando market. Insert window replacement on a standard double-hung runs $500 to $900 per opening. Full frame replacement runs $850 to $1,500 per opening. Impact-rated glass adds $300 to $600 per window. A failed low-E glass unit replacement in an existing sash runs $250 to $450. A sliding glass door roller and track service runs $150 to $300. The variables that move the price: opening size, product line, whether the frame is salvageable, and access conditions on a second story. Every job gets a written line-item quote before any work starts. Call (850) 679-8554 for your free estimate.
We Also Serve Cities Near Orlando
Beyond Orlando, our crews regularly work in Altamonte Springs, Casselberry, Ocoee, and Lake Mary. If you’re in one of those areas, you get the same written price, the same live arrival time, and the same 365-Day Done Right Promise. See how we handle Window Replacement in Orlando or learn more about our full Window Replacement process.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Orlando
In most cases, glass-only replacement that doesn’t alter the structural opening won’t trigger a permit in Orlando, but full frame replacement or changing window sizes will. We pull the permits when they’re required and we don’t make you chase down city paperwork. Call (850) 679-8554 and we’ll tell you exactly what applies to your specific home.
You can usually replace only the insulated glass unit as long as the sash and frame are structurally sound. In Baldwin Park, we recently did exactly that: a 2007-era double-hung had a failed low-E coating that turned hazy and lost its insulating gas, but the vinyl frame was fine. We swapped the glass units to a PGT clear low-E option with a Solar Heat Gain Coefficient under 0.25, kept the original jamb and sash, and cut the afternoon heat gain without full replacement cost.
Yes, though the honest answer is that the biggest energy wins come from the low-E coating and proper air sealing, not the impact rating itself. Homeowners replacing single-pane aluminum with modern low-E, impact-rated windows in Orlando typically see a 15% to 25% reduction in cooling cost, with the biggest gains on west-facing walls that catch the afternoon sun. We’ll give you real numbers on your home, not a brochure promise.
If the door frame and glass are still sound, we can often replace the rollers and tracks for $150 to $300 and get it sliding again. But if the aluminum frame has corroded to the point of air leakage, or if the door is original single-pane, a new impact-rated door in Orlando runs $1,800 to $3,500 installed. We’ll give you a straight recommendation either way, and it’ll be in writing before you decide.
Most Orlando HOAs, especially in communities like Baldwin Park, require architectural review before you change window styles, colors, or frame materials. Glass-only replacement usually doesn’t need approval. We’ve worked with Orlando HOAs for years and can help you submit the right documentation so your project doesn’t stall. Call (850) 679-8554 and we’ll walk you through it.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.