New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Orlando, FL | Juniper Windows Orlando
We provide independent CGI window and door service across Orlando, from glass replacement to full frame repair. The thing that makes our CGI work different here is simple: we know which models fail in Florida’s humidity, which ones hold up, and what it costs to fix either. If you’ve got a fogged CGI Estate window or a Sentry slider that won’t track, call us at (850) 679-8554 and we’ll tell you straight what you’re looking at.
Why Orlando Residents Choose Us for CGI Service
Most window companies in Orlando will tell you they can “handle” CGI. Few of them have actually pulled apart a CGI Sentry interlock after a storm, or ordered replacement insulated glass units sized to CGI’s exact frame specs. We have. Sean Mackey, our owner, learned the trade at Los Angeles Trade-Technical College and has spent over two decades focused on windows and doors specifically, not siding, not roofing. His crew has been serving Orlando, FL neighborhoods from College Park to the edges of Lake Nona, swapping leaky single-panes for impact-rated units that can actually stand up to a Florida storm season. That’s the experience we bring to every CGI service call in Orlando.
We’re also independent, which matters more than people realize. We’re not tied to a corporate authorization checklist or a manufacturer’s sales quota. If a repair makes sense, we say so. If replacement is the honest call, we say that too, with numbers to back it up.
Common CGI Windows & Doors Problems We Solve in Orlando
- Fogged glass on Estate and 950 Series units. Orlando’s humidity eventually kills the seal on insulated glass, especially when the window gets direct afternoon sun. We replace just the glass when the frame is sound, which saves you hundreds compared to a full unit swap.
- Corroded aluminum frames on older CGI Classic models. This is a real Orlando problem, not a generic one. Years of wind-driven rain combined with our humidity eats at uncoated aluminum tracks and corners. We clean, treat, and where the corrosion has gone too far, replace the frame section.
- Failed interlocking mechanisms on CGI Sentry sliding doors. Storm debris forces panels out of alignment, and once that interlock fails, the door won’t seal properly. We realign, replace interlock hardware, and run a water test before we leave.
- Warped or swollen sashes on CGI Estate wood-clad windows. Afternoon thunderstorms dump a lot of water fast, and if a sill flashing was ever done wrong, moisture gets behind the cladding. We can often replace the sash without pulling the whole frame.
- Builder-grade CGI doors with failed rollers. Plenty of 2000s stucco-clad homes in Orlando got cheap roller hardware on otherwise good door panels. Swap the rollers to stainless, clean the track, and the door slides like it should have from day one.
CGI Service in Orlando: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes CGI work in Orlando more than any other: the post-2002 Florida Building Code requires impact-resistant glazing or shutters on every new window and door opening. That means neighborhoods like Baldwin Park and Lake Nona, built after the code change, are full of CGI impact units that are now fifteen to twenty years old. The glass is still impact-rated, but the seals, hardware, and weatherstripping have been through two decades of humidity and UV. So we see a lot of otherwise solid CGI windows that just need glass replacement or hardware work to keep performing. Contrast that with an older neighborhood like Conway, where original 1980s sliders have corroded aluminum tracks and failed rollers. Same city, two very different Cgi sales & service calls. A contractor who treats them the same is guessing. We don’t.
CGI Models & Products We Service in Orlando
We work on the full CGI lineup: Estate Collection (wood-clad and aluminum-clad), Classic Collection (their original aluminum impact line), Sentry Collection (their heavy-duty, multi-point locking sliding doors), and the 950 Series (the workhorse vinyl impact window found all over Orlando). For parts, we use genuine CGI components whenever they’re available, especially impact-rated glass and interlocking hardware, because that’s what preserves the unit’s wind-load certification. When a part is discontinued, we source aftermarket alternatives that meet or exceed the original spec. If repair costs pass 50% of what a new unit would run, or the impact certification is compromised, we’ll tell you replacement is the honest move.
CGI Service Pricing in Orlando
Here’s what you’re actually looking at in Orlando, with real ranges so you don’t have to call just to get a ballpark:
- Glass replacement on a fogged CGI window: $285 – $520 per pane, depending on size and impact rating.
- Roller and track rebuild on a CGI sliding door: $185 – $380.
- Interlock realignment on a Sentry slider: $220 – $450.
- Frame corrosion treatment and sealing: $150 – $425.
- Full CGI window replacement, installed: $950 – $2,400 per opening, depending on size, model, and impact rating.
Every estimate we write in Orlando is a fixed price, in writing, before any work starts. That’s not a sales line; it’s how Sean runs every job. Call (850) 679-8554 and we’ll give you an exact number for your specific window or door, free.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and offer Cgi repair in Altamonte Springs and surrounding communities. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Orlando
If the frame damage is cosmetic, like surface scratches or minor dents, the impact rating is generally unaffected. If you see cracks in the frame, separation at the corners, or a window that no longer sits square in the opening, that’s a structural concern and the impact certification could be compromised. We inspect for this specifically in Orlando because code enforcement here is more likely to flag it, especially on post-2002 homes. Call (850) 679-8554 and Sean’s crew will give you an honest assessment.
Yes, in about 85% of the fogged CGI units we see in Orlando, the frame is still structurally sound and only the insulated glass unit has failed. We remove the sash, order a new IGU sized to CGI’s exact frame dimensions, and reinstall. You’ll pay $285 – $520 instead of $950 or more for a full replacement. If the frame has rot or the sash is warped, we’ll tell you that in person and show you why.
It’s not that the aluminum is inferior. It’s Orlando’s combination of high humidity and wind-driven rain hitting specific exposures. Aluminum builds up a thin oxide layer, which normally protects it. But in Orlando’s wet season, that moisture never fully dries, and salt carried in from coastal storms accelerates pitting, especially on east-facing elevations and any frame with a raw cut edge. That’s why we always treat raw cuts and recommend regular cleaning of track weep holes here.
Most 950 Series parts are still available, including balances, locks, and weatherstripping. Insulated glass units are also available through glass fabricators who match the CGI spec. Where we run into trouble is with older 950 hardware that was discontinued 10-plus years ago. When that happens, we use aftermarket parts that meet or exceed the original spec. If your 950 Series windows are beyond economical repair, we’ll be direct about it and price a Kissimmee Cgi service replacement that makes sense for Orlando weather.
Generally no, as long as the windows were installed to the 2002 or later code and their impact rating has not been compromised by damage or improper repairs. Orlando’s wind-load requirements have remained largely consistent since the statewide code took effect. What we do see on 2005-era units is seal failure and hardware wear, not code compliance problems. We’ll do a full inspection and tell you what you actually need, not what’s convenient to sell. Estimates are free at (850) 679-8554.
Service Areas Near Orlando
Our crew covers the entire Orlando metro, including Kissimmee, Altamonte Springs, Clermont, DeBary, and Lake Mary. If you’re in one of those areas and need CGI service, give us a call and we’ll tell you exactly when we can get there. We also have dedicated pages for Orlando service area and CGI service in Kissimmee, plus CGI service in Altamonte Springs.
Book Your CGI Service in Orlando Today
If you’ve got a CGI window or door acting up in Orlando, don’t wait for the next storm to find out it won’t hold. Call (850) 679-8554 and we’ll get you on the schedule with a fixed-price estimate before any work starts. We answer the phone, we show up when we say we will, and we stand behind the work for 365 days, parts and labor, in writing.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.