New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Orlando
Door replacement in Orlando is not a cosmetic job. It is a wind-load calculation, a product approval question, and a permit inspection all wrapped into one opening in your wall. We know because we do this work in Orlando every week, from ranch homes in Conway to stucco subdivisions in Pine Hills. A replacement door here has to stand up to 150 mph wind speeds under the 2020 Florida Building Code, and it has to be documented correctly or your insurance company may not honor the wind mitigation credit you deserve. Call us at (850) 679-8554 and we will walk you through what your specific opening actually needs.
Why Juniper Windows Orlando Is Orlando’s Preferred Door Replacement Company
Our Orlando customers tend to ask the same three questions: Is the door Florida Product Approval rated? Will the inspector pass it on the first visit? And will the written price change once the old frame comes out? The answers are yes, almost always, and no. We put a line-item price in writing before any work starts, and the 365-Day Done Right Promise covers parts and labor for a full year after installation. Sean Mackey, who leads our Orlando team, has built the crew around one habit: explain the code requirement in plain language, then install the door like the inspector is standing behind us.
Homeowners in neighborhoods like Baldwin Park, College Park, and Lake Nona call us because the quote they got from a general contractor did not mention wind-load rating at all. We mention it first. That is the difference between a door that keeps water out during a summer downpour and one that fails a county inspection two days after it is installed. Our Door Replacement team handles the full scope: slab, frame, threshold, hardware, and the paperwork that proves the opening is compliant.
Every technician who arrives at your Orlando home is background-checked and wears a uniform. You get a live arrival time on your phone, just like you would from a rideshare app, plus before-and-after photos and a digital invoice you can pay from a link. That is the Relay Visibility Guarantee, and it applies to every job we book in Orlando.
Door Contractors in Orlando
Door Contractors in Orlando do more than hang a slab on hinges. Our scope starts with measuring the rough opening against the wind-load zone, checking the existing jamb for corrosion or rot, and confirming which product approval applies to that specific elevation of the home. In most of Orlando, a replacement exterior door falls under Wind Speed Zone 3, which means the assembly has to resist design pressures tied to 150 mph winds. That is a code requirement, not a preference. Expect a typical front door replacement in Orlando to run $1,800 to $4,200 depending on impact rating, glass pack, and whether the frame needs full reconstruction.
What a Compliant Quote Includes
A written quote from us lists the door slab, the approved frame, the anchoring schedule, and the inspection fee as separate line items. If the door carries a Miami-Dade NOA or Florida Product Approval number, that number goes on the quote. A cheap quote that omits the approval number is a red flag. You will pay for it twice: once at install and again when the inspector fails the opening.
When Frame Replacement Is Required
Orlando homes built in the 1980s and 1990s frequently have aluminum frames that have corroded against concrete block. Once the jamb pulls away, no new slab will seal correctly. Our crews rebuild the buck, anchor it to the block, and set the new door as a complete approved assembly. That gets the opening back to code compliance and stops the air and water leaks at the source.
Door Frame Repair in Orlando
Door Frame Repair in Orlando is often the difference between a door that latches and one that binds every time the humidity spikes. Florida’s humid subtropical climate works on wood and metal frames year-round. Wood absorbs moisture and swells. Aluminum oxidizes where it meets block or stucco. Steel rusts at the threshold. We repair frames, re-anchor loose jambs, replace rotted bucks, and reset thresholds so the door slab sits square in the opening again. Frame repair in Orlando typically runs $350 to $900 depending on the extent of the damage and whether the threshold needs replacement.
Corrosion and Humidity Damage
We see the same pattern in Orlando homes built before 2002: the bottom track of a sliding glass door collects water from summer thunderstorms, the rollers corrode, and the door drags. Or the side jamb of a front entry door wicks moisture from the slab and swells just enough that the deadbolt no longer lines up. Repairing the frame early costs a few hundred dollars. Replacing a water-damaged subfloor or a blown-out header because the frame was ignored costs several thousand.
Re-anchoring Failed Jambs
In Pine Hills we replaced a corroded 1980s aluminum sliding glass door with a PGT impact-rated model carrying a large-missile rating. The old jamb had pulled away from the block wall, so we anchored a reinforced frame, installed a new insulated glass unit with low-E coating, and scheduled the county inspection that confirmed design pressure compliance for the homeowner’s wind mitigation report. That is the full repair scope when a frame fails, and it is the kind of detail that matters on an insurance claim after a hurricane.
Trusted Brands We Service in Orlando
We stock and install doors from CWS, ES Windows, and Mr-Glass, among the eight product lines we carry. That means we are not limited to whatever a distributor happens to have in the warehouse that week. CWS doors carry Florida Product Approval for impact applications across the Orlando metro. ES Windows gives us a clean, narrow sightline for mid-century and modern homes in neighborhoods like Audubon Park. Mr-Glass produces solid entry door systems that hold up against afternoon UV exposure and daily humidity swings. Local stock means faster turnaround when your door fails and you need it replaced before the next storm front rolls through.
Common Door Replacement Problems We See in Orlando Homes
- Non-approved doors on Wind Speed Zone 3 openings. A door without Florida Product Approval or Miami-Dade NOA fails the required inspection and voids any wind mitigation credit you could have claimed. We replace it with a compliant assembly and document the product approval number.
- Corroded sliding glass door tracks from summer downpours. Water pools in the bottom track, the rollers seize, and the door becomes a two-person job to open. We swap in new rollers and tracks, or replace the entire door with an impact-rated unit if the frame is too far gone.
- Warped entry doors from humidity swings. Untreated wood slabs in Orlando swell during the wet season and shrink in the dry season. The door starts sticking in August and rattling in January. Replacing it with a reinforced, sealed-composite frame ends the cycle.
- Failed low-E coatings on post-2004 doors. Newer homes in Baldwin Park and Lake Nona were built under stricter wind codes, but the intense Florida sun breaks down low-E coatings on cheap glass. The glass looks hazy, the room heats up, and the seal fails. We replace the glass pack with high-performance low-E rated for our UV load.
Pricing for Door Replacement in Orlando, FL
A standard front entry door replacement in Orlando runs $1,800 to $4,200. An impact-rated sliding glass door typically runs $3,500 to $7,500 installed. Full frame reconstruction on a rotted or corroded opening adds $400 to $1,200 depending on the condition of the buck and threshold. What drives the range: the wind-load zone, the product approval rating, the glass pack, and how much of the existing frame can be salvaged. We give you a written line-item price before any work begins, and that number does not move once the old door comes out. Call (850) 679-8554 to schedule a free estimate and get exact numbers for your opening.
We Also Serve Cities Near Orlando
Our crews cover the whole Orlando metro. That includes Altamonte Springs, Casselberry, Ocoee, and Lake Mary. If you live just outside the city limits, the same wind-load rules apply, and the same product approvals matter. Call us and we will schedule the same written estimate we give our Orlando customers.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Orlando
Most of Orlando falls under Wind Speed Zone 3, which means the door assembly must be rated for wind speeds up to 150 mph and carry either Miami-Dade NOA or Florida Product Approval. The specific design pressure required for your opening depends on the elevation, the home’s height, and the exposure category. Our crew calculates that on-site before we order the door. Call (850) 679-8554 and we will tell you exactly what your opening requires.
Yes. Orlando requires a permit for exterior door replacement, and the work must pass a county inspection that verifies wind-load compliance and anchoring. If the door lacks the proper product approval, the inspection fails. We pull the permit, schedule the inspection, and hand you the documentation you need for your wind mitigation report.
It often does, but only if the door carries the correct product approval and the installation is documented with an inspection. That documentation is what your insurance company uses to apply the wind mitigation credit. A door without the paperwork does nothing for your premium. We give you the approval number, the inspection result, and the photos your insurer needs.
Miami-Dade NOA is the older, stricter standard developed for South Florida’s wind loads and is accepted statewide. Florida Product Approval is the current statewide standard that uses the same testing criteria but is issued through the Florida Department of Business and Professional Regulation. Both are accepted in Orlando as long as the design pressure rating matches your Wind Speed Zone 3 opening.
In Orlando, slab-only replacement usually fails inspection because the existing frame was never designed for current wind-load anchors, and corrosion or rot has compromised the original anchoring. Most of the time you need the full door and frame as one approved assembly. We tell you honestly which one your opening needs, and the written quote spells it out. Call (850) 679-8554 for a free estimate.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando, FL.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.