New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Hunters Creek
Replacing a door in Hunters Creek isn’t a cosmetic decision. It’s a wind-load compliance project, an energy calculation, and a security upgrade all happening at once. A typical exterior door replacement in Hunters Creek runs $1,900 to $4,800 installed, and an interior door swap lands between $350 and $900 per opening. We dispatch crews into Hunters Creek throughout the week and carry the Florida Product Approval paperwork on the impact-rated units this area actually requires. If you’re pricing a door, call us at (850) 679-8554. We’ll give you a written number before anything gets ordered.
Why Juniper Windows Orlando Is Hunters Creek’s Preferred Door Replacement Company
Hunters Creek homeowners tend to know exactly what they want: a door that closes square, seals against afternoon thunderstorms, and carries the documentation their insurance agent asks for. That’s the work we do. Our Door Replacement team has handled everything from single interior slab swaps to full-frame impact installations across this area, and the most common feedback we get is that the price on the written quote matched the final invoice. No change orders. No “we found something once we pulled the old door.” The quote is the price.
Part of what makes that work in Hunters Creek specifically is that the housing stock is predictable. These 1980s and 1990s Mediterranean and Florida contemporary homes have similar framing, similar rough openings, and similar failure patterns. That predictability lets us spec the right product the first time, whether it’s a Therma-Tru fiberglass entry door or a CWS impact-rated sliding glass door for a golf course lot. Sean Mackey leads our team, and the standard he’s drilled into every install is the same: if the door doesn’t operate smoothly and pass inspection, it isn’t done.
Interior Door Installation in Hunters Creek
Interior Door Installation in Hunters Creek usually means swapping hollow-core builder doors for solid-core panels, rehanging a door that rubs at the jamb because the slab has swelled in humid air, or refitting a bedroom closet with a door that actually slides properly. High indoor humidity in Hunters Creek causes hollow-core doors to warp gradually, especially in upstairs bedrooms where attic heat builds in the afternoon. We see it all the time in the older sections around the Hunters Creek golf course.
Solid Core Upgrades
A hollow-core door costs about $120 to $180 for the slab alone. For $350 to $650 installed, we can hang a solid-core door that blocks sound better and won’t flex the way a cardboard honeycomb core will. Most homeowners in Hunters Creek choose pre-primed MDF panels for interior use and paint them to match baseboards.
Humidity-Related Adjustments
When a bathroom door won’t latch in summer, the problem is typically the slab or the jamb absorbing moisture. We plane the door edge, reset the hinges, or replace the jamb if it’s too far gone. This runs $250 to $550 per door, and once the room’s ventilation is fixed, the issue doesn’t come back.
Door Installers in Hunters Creek
Door Installers in Hunters Creek do more than hang a slab on hinges. A proper installation here starts with checking what’s behind the existing jamb: corroded aluminum from sprinkler overspray, rotted wood at the threshold, or a rough opening that was never square. Those conditions are common in Hunters Creek, especially in lakefront sections where humidity and irrigation systems both work against door frames.
Full-Frame Replacement
When the jamb is pitted or the threshold no longer seals, we pull the entire unit and replace the frame. For exterior doors, that’s where the Florida Product Approval paperwork matters. A compliant full-frame replacement in Hunters Creek runs $2,400 to $4,800 depending on size and glass package. We set the new frame in polyurethane sealant, shim it square, and foam the gaps so the door doesn’t whistle during thunderstorms.
Slab-Only Swap
If the existing jamb is square, solid, and free of corrosion, we can replace just the slab. That’s $450 to $900 for a standard interior door and $1,200 to $2,600 for an impact-rated exterior slab. One caution: if the old jamb is aluminum from the 1980s and has any pitting, a slab-only swap will not hold a large-missile rating and we won’t write it as code-compliant.
Trusted Brands We Service in Hunters Creek
We install and service doors from Therma-Tru, PGT, CWS, ES Windows, and Mr-Glass, which means Hunters Creek homeowners aren’t locked into whatever a single distributor happens to stock. If you have an existing Therma-Tru entry door that’s warped or a PGT sliding door with a blown seal, we can order replacement parts or upgrade the unit without reworking the entire opening. Because these product lines are common across Hunters Creek and central Florida, our turnaround on ordering is typically faster than a one-brand shop can manage. You get the right door, not just the most convenient one.
Common Door Replacement Problems We See in Hunters Creek Homes
- Corroded aluminum jambs from sprinkler overspray. In sections like The Fairways and Vizcaya, irrigation heads sit close enough to side entries that aluminum frames get eaten through. By the time the door binds or the lock won’t throw, the jamb is usually too far gone to reuse.
- Failed thermal breaks on original single-pane sliders. The 1980s aluminum frames conduct heat and sweat in humid weather. Once the thermal break fails, the frame grows and shrinks until the door jams and the rollers grind.
- Missing wind-load documentation. A lot of Hunters Creek homeowners have replacement doors that look impact-rated but came with no Florida Product Approval sticker or installation record. Without that paper, Florida Statute 627.0629 won’t apply to your premium.
- Hollow-core interior doors warped beyond adjustment. Upstairs bedrooms with poor attic ventilation cook hollow-core slabs until they twist. No amount of hinge adjustment fixes a twisted slab; it needs to be replaced.
Pricing for Door Replacement in Hunters Creek, FL
We Also Serve Cities Near Hunters Creek
Beyond Hunters Creek, our door installation crews serve Hunters Creek neighbors in Orlando, Kissimmee, Altamonte Springs, and Clermont. If you’re in one of those areas and need a door replaced with proper wind-load documentation and a written price, call (850) 679-8554.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Hunters Creek
No, Hunters Creek is outside the High Velocity Hurricane Zone, but doors still need Florida Product Approval with a large-missile rating. That’s the state-level approval, not the Miami-Dade NOA. The design pressure requirement here is 140 mph, and any compliant door product will carry an FL product approval number your installer should record on the permit paperwork. That document is what an insurance inspector wants to see. Call (850) 679-8554 and we’ll include the approval number in your written quote.
A wind mitigation inspector checks that every glazed opening, including doors, has impact-rated glazing or an approved shutter system with a Florida Product Approval sticker or etched mark on the glass. They also verify the door frame is anchored to the rough opening per the product’s installation instructions and that the fasteners and anchoring are visible or documented. A door with impact glass but no paperwork, or a reused corroded jamb, will not pass. We photograph the installation and hand you the product approval documents at the end of the job. Call (850) 679-8554 to schedule an estimate with documentation included.
Yes, if the replacement is documented. Florida Statute 627.0629 requires insurers to offer a premium credit for wind mitigation improvements. A compliant impact-rated sliding glass door with Florida Product Approval documentation typically earns a credit on the wind portion of the premium. The key is the paperwork: without the product approval number and a passed wind mitigation inspection, there’s no credit even if the glass is impact-rated. We give you that paperwork. Call (850) 679-8554 for a free estimate.
The original aluminum frames on lakefront homes in Hunters Creek sit a few feet from constantly irrigated landscaping and humid air off the water. Sprinkler overspray carries dissolved minerals that eat the anodized coating, then pitting starts, and once moisture reaches the interior wall, the jamb seizes and the slab binds. In the Fairways section, we pulled a slider where the jamb had corroded completely through. The fix is a full-frame replacement with a fiberglass or vinyl frame that won’t react to irrigation water. Call (850) 679-8554 for a free estimate on a frame replacement that will outlast the original.
Sometimes, but not on a corroded or out-of-square frame. The slab can only be swapped if the existing jamb is structurally sound, square, and capable of carrying the impact-rated door’s anchoring requirements. Aluminum frames from the 1980s lakefront sections rarely qualify. If we can reuse your frame, a slab-only swap runs $1,200 to $2,600. If not, we’ll show you exactly why on your written quote. Call (850) 679-8554 and we’ll tell you honestly whether your frame is worth saving.
Need a door replaced in Hunters Creek? Call Juniper Windows Orlando at (850) 679-8554 for a free, written estimate that names the product, the Florida Product Approval number, and the installed price. No surprises. No revisits unless we made a mistake, and if we did, the 365-Day Done Right Promise covers it, parts and labor, in writing.
Written by Sean Mackey, Owner at Juniper Windows Orlando.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.