New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Hunters Creek
Window installation in Hunters Creek usually means one of two jobs: a swap of failing original aluminum units in a 1980s stucco home, or a higher-end upgrade to impact-rated glass on a golf course or water-view lot. Juniper Windows Orlando handles both, including our Window Replacement in Hunters Creek, and we’re familiar with what those older Hunters Creek openings hide once the old frame comes out. Most installations are priced as full-frame replacements because the original aluminum is rarely worth saving. Call (850) 679-8554 and we’ll give you a written price before any work starts.
Why Juniper Windows Orlando Is Hunters Creek’s Preferred Window Installation Company
Hunters Creek homeowners tend to ask the same three questions: what does it cost, how long will it take, and will the crew show up when they say they will. We answer the first one in writing before a single screw turns. The second depends on frame condition, which we only know after pulling a sample window. The third is covered by The Relay Visibility Guarantee: a live arrival time you can track, before-and-after photos of every job, and a written price that does not move at the door.
We’re led by Sean Mackey, and every crew that works in Hunters Creek is background-checked and uniformed. You know exactly who is walking through your door. Juniper Windows & Doors is the windows-and-doors specialist inside the Relay Home Co. family, founded in 2001. We do Window Installation and replacement only. No kitchens, no roofs, no side work.
Our phone is answered by a live person 24/7. You will not sit in a voicemail maze when a hurricane watch is posted and you need to know whether your window order is on track.
Window Installers in Hunters Creek
Window installers in Hunters Creek spend a lot of time on 1980s Mediterranean and Florida contemporary homes with stucco exteriors, tile roofs, and original aluminum single-pane units that have reached the end of their service life. The job usually starts with removing the old window, inspecting the buck, and deciding whether the rough opening can carry the new unit’s weight. On a typical Hunters Creek home, full frame replacement runs $850 to $1,600 per opening including standard insulated glass. Impact-rated units from PGT or ES Windows add $350 to $700 per opening, depending on size and design pressure rating.
What a Full Frame Replacement Actually Involves
We pull the old window down to the rough opening, not just the sash. On Hunters Creek homes with corroded aluminum jambs, the old frame cannot be reused as a mounting surface. We reframe the opening with pressure-treated buck, flash the sill pan correctly, and set the new unit square. The work is inspected and permitted where required.
When a Retrofit Makes Sense
A retrofit keeps your existing frame and drops a new window inside it. It is faster and cheaper, but Hunters Creek rarely qualifies. Sprinkler overspray and lakefront humidity have usually corroded the original aluminum at the sill and jamb. Trying to mount a heavier impact unit on a compromised frame is a false economy.
Casement Windows in Hunters Creek
Casement windows in Hunters Creek are common upgrades on lakefront and conservation-view lots where homeowners want wide, unobstructed sightlines and a tight seal against afternoon thunderstorms. These windows hinge at the side and crank outward, which makes them a good match for stucco homes with fewer interior mullions to break up the glass. A standard casement installation in Hunters Creek runs $900 to $1,800 per opening for a quality vinyl or aluminum frame, with impact-rated glass adding $400 to $800 per unit depending on size.
Why Casements Handle Hunters Creek Weather Well
Casement windows seal against the frame on all four sides when closed. That matters in Hunters Creek because afternoon storms roll in fast with driving rain, and the wind hits the window at an angle. A properly installed casement with a multi-point lock outperforms a sliding window in an air or water infiltration test.
Tradeoffs on Older Stucco Homes
Casements are heavier than sliders or single-hungs. On a 1980s Hunters Creek home, that means the rough opening often needs reinforcement. When our crew opened up a house on Bella Vida Blvd, they found wood bucks rotted from failed sill flashing. We wrote an allowance for jamb extensions and new pressure-treated bucks, got the owner’s sign-off on PGT 5500 impact casements, and finished with a watertight sill pan and Miami-Dade NOA stickers in place. That is the difference between a bid that holds and one that balloons mid-job.
Trusted Brands We Service in Hunters Creek
We stock and install PGT, ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru. For Hunters Creek specifically, PGT impact units are the most common spec because they hold Miami-Dade NOA approval and carry the design pressure ratings Florida wind codes demand. ES Windows gives homeowners a cleaner aluminum line with narrow sightlines, which suits the modern Florida contemporary sections along Town Center Blvd and Hunter’s Creek Blvd. We keep replacement hardware and matching trim for these lines in local inventory, so a post-installation adjustment does not mean a two-week wait.
Common Window Installation Problems We See in Hunters Creek Homes
- Corroded aluminum frames at the sill and jamb. Decades of sprinkler overspray and lakefront humidity eat through the thermal break and seize the frame. The old window cannot be reused as a mounting surface without reinforcement, which is why we default to full frame replacement on most Hunters Creek jobs.
- Rotted wood bucks behind the stucco. Older stucco homes hide undersized or decayed wood around the rough opening. Once the window is removed, the opening needs reframing to carry the heavier impact-rated glazing without sagging.
- Electrical wiring in the wall cavity. 1980s wiring often runs through the same stud bays opened for window work. When a permit is pulled and the wall is open, code requires arc-fault breakers and updated receptacle spacing. We write this into the contract as an allowance, not a surprise change order.
- Failed sill flashing causing hidden leaks. The window looks fine from inside, but the sill pan was never flashed correctly and water has been migrating into the framing for years. We install new sill pans on every full frame replacement, regardless of what we find underneath.
Pricing for Window Installation in Hunters Creek, FL
A typical single-hung or horizontal roller window installation in Hunters Creek runs $850 to $1,600 per opening. Casement windows start around $900 and top out near $1,800 for larger impact-rated units. Bay and bow windows are the most expensive, usually $4,500 to $9,000 depending on projection and seat construction. The biggest price drivers here are frame condition and impact rating. Original 1980s aluminum frames that need full replacement add labor and materials. Miami-Dade NOA-rated glass from PGT or ES Windows adds $350 to $800 per opening, but it unlocks insurance discounts and meets the windborne debris code for Hunters Creek’s exposure zone. Your written price covers everything: removal, disposal, framing repair, flashing, installation, trim, and permit fees. Call (850) 679-8554 for a free estimate.
We Also Serve Cities Near Hunters Creek
Our crews work throughout Hunters Creek and the surrounding area, including Orlando, Kissimmee, Altamonte Springs, and Clermont. If you live in one of those cities and need Window Installation pricing, the same written quote process applies. Call us and you will get a live person, a scheduled arrival time, and a locked number before work begins.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Hunters Creek
You almost always need full frame replacement in Hunters Creek. The original aluminum frames from the 1980s have failed thermal breaks and corroded sills from sprinkler overspray and lakefront humidity. Replacing only the glass leaves a compromised frame that cannot properly seal or carry a heavier modern unit. Full frame replacement costs more upfront, but it is the only way to get a watertight, code-compliant installation. Call (850) 679-8554 and we’ll pull a sample window to confirm what your home actually needs.
We write an allowance into the contract for exactly this. If the opening reveals rotted bucks, undersized framing, or wiring that must be updated under a permit, we document it with photos, price it in writing, and get your approval before touching anything. You will not get a change order after the fact. The 365-Day Done Right Promise covers the completed work for a full year, parts and labor, in writing.
Because Hunters Creek sits in a windborne debris zone and most homes are oriented toward water or conservation views, which means big glass. Regular insulated glass shatters on impact and lets wind pressure enter the home. Impact-rated glass from PGT or ES Windows is built to resist wind-borne debris without shattering, and it carries Miami-Dade NOA approval that your homeowner’s insurance company recognizes. The premium is real, but so is the premium discount and the storm protection. For a precise comparison on your home, call us for a free estimate.
Design pressure is the structural rating that tells you how much wind load a window can take before it fails. Miami-Dade NOA is a product approval that certifies the window met specific testing protocols, including impact resistance and air and water infiltration. A window can have a high design pressure but not be NOA-approved, which means it has not passed the large-missile impact test required in many Florida wind zones. For Hunters Creek homes, we typically recommend units that carry both. We’ll help you read the labels before you spend a dollar.
Yes, most Florida insurers offer wind mitigation credits when you install impact-rated windows with NOA documentation. The discount varies by carrier and by the home’s other mitigation features, like roof-to-wall connections and secondary water resistance. We provide the NOA stickers and documentation with every impact installation so you can file the wind mitigation form. The credit will not cover the full cost of the windows, but it recurs every year on your premium. Call (850) 679-8554 for exact pricing on impact-rated units for your Hunters Creek home.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Hunters Creek, FL.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.