New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Bay & Bow Windows in Orlando, FL
Bay and bow windows in Orlando typically cost between $3,800 and $9,600 installed, depending on the number of glass panels, window size, and whether you choose impact-rated glass. At Juniper Windows Orlando, our window installation team installs both styles for homeowners who want a wider view, more natural light, and a room that feels larger without moving a single wall. Call (850) 679-8554 and we’ll give you a written price before any work starts.
A bay window is a three-panel unit that angles outward from the wall, usually with a fixed center picture window and venting side windows. A bow window uses four or more panels set in a gentle curve. Both create a window seat nook, a reading bench, or just a place your dog will claim as permanent property. We’ve handled hundreds of these installations as part of our Window Installation in Orlando work, and the difference between a bay window that leaks and one that doesn’t comes down to how the unit is flashed, supported, and sealed against Florida rain.
Sean Mackey leads our Orlando team, and every bay or bow window job gets two things in writing: the price and the 365-Day Done Right Promise. If something isn’t right after install, we fix it. Parts, labor, a full year. No gray area.
Key Takeaways
- Bay windows (3 panels) and bow windows (4+ panels) both project outward and add floor-level light and seating space.
- Orlando pricing runs about $3,800 to $9,600 installed; impact-rated glass pushes toward the higher end.
- Juniper installs impact-rated PGT, CGI, and ES Windows units built for Florida wind and debris.
- Every job includes a written price before work starts and the 365-Day Done Right Promise.
- Call (850) 679-8554 for a free estimate. A person answers, 24/7.
When You Need Bay & Bow Windows
Not every home needs a bay or bow window, but when the conditions line up, nothing else does the job. Here are the situations we see most often across Orlando neighborhoods like Baldwin Park, College Park, Winter Park, and Dr. Phillips:
- You want more usable space without an addition. A bay window projects 12 to 24 inches beyond the wall, which sounds small until you put a cushion on it and realize you’ve gained a reading nook or breakfast bench. Bow windows with five or six panels can extend further and create a curved seating area.
- The room feels dark even at noon. Flat windows only capture light from one direction. A bay or bow unit angles glass panels at 30 or 45 degrees, pulling in morning and afternoon sun from multiple angles. In Orlando’s long summer days, that’s a real difference.
- You’re replacing a flat window anyway and want more visual impact from the curb. If the old window is shot, the incremental cost of going to a bay or bow unit is often less than people expect, especially when you’re already paying for framing, flashing, and interior trim work.
- You have a view worth framing. Lakefront homes around Lake Eola, Conway chain of lakes, or the Butler Chain deserve more than a 36-inch double hung. A bow window can run six to eight feet wide and turn a lake view into the centerpiece of the room.
- Your current window leaks and you’d rather fix the problem once. Bay and bow windows are self-supporting projections. If the roof flashing, knee bracing, or seat board was installed wrong the first time, you get water intrusion and sagging. We see this regularly in 1980s and 1990s Orlando homes where the original units were builder-grade vinyl.
- You want impact protection without bolt-on shutters. Impact-rated bay and bow windows from PGT, CGI, and ES Windows resist wind-borne debris without aluminum panels or accordion shutters bolted to the outside of your house.
Our Bay & Bow Windows Process
We keep this simple because you’re busy. The process at Juniper Windows Orlando is built around The Relay Standard: book in a tap, get a live arrival time, see before-and-after photos, get a written price, and pay a digital invoice from a link. Here’s how a bay or bow window project goes:
- Call or book online. Call (850) 679-8554 and a live person picks up. Tell them you’re interested in a bay or bow window. We’ll schedule a site visit at a time that works, and you’ll get a live arrival time you can track, not a four-hour window.
- Site measurement and conversation. A background-checked, uniformed technician comes to your home, measures the opening, checks the existing framing and support structure, and talks through panel count, glass options, venting, and interior finish. This is when we walk you through the U-factor and solar heat gain numbers for different glass packages so you know what you’re buying.
- Written price, locked before you decide. You’ll get a line-item price for the window unit, support framing, flashing, installation labor, and interior trim. That number does not change at the door. If you decide to proceed, that same written price is your contract.
- Installation day. We arrive on time, protect the work area, remove the old window, brace and flash the rough opening, set the new unit, insulate, seal, and trim. For bay and bow windows, we install or verify the support cables or knee braces so the projection doesn’t sag over time. Before-and-after photos are part of the job.
- Walkthrough and done-right check. We open and close every venting panel, check the seals, clean the glass, and walk the job with you. Your 365-Day Done Right Promise starts the day we finish. If a repair fails within the year, the second visit is free, no charge, no argument.
Bay & Bow Windows Pricing in Orlando
Bay and bow window installation in Orlando runs about $3,800 to $9,600 for a complete job. That includes the window unit itself, structural support, flashing, installation labor, and basic interior trim. Here’s a breakdown of what you’re paying for:
| Bay or Bow Window Component | Typical Orlando Price Range |
|---|---|
| 3-panel bay window, vinyl frame, standard glass | $3,800 – $5,800 |
| 4-panel bow window, vinyl frame, standard glass | $4,200 – $6,800 |
| 5 to 6-panel bow window, vinyl frame, standard glass | $5,500 – $8,500 |
| Impact-rated glass upgrade (PGT, CGI, or ES Windows) | Add $1,500 – $3,000 depending on panel count |
| Structural support repair or reinforcement (cables, knee braces, seat board) | $400 – $1,200 when required |
| Interior finish work (window seat, custom trim, sill extension) | $600 – $1,800 |
What Changes the Price
Panel count is the biggest lever. A three-panel bay window costs noticeably less than a five-panel bow simply because there are fewer glass units, fewer seams, and less support framing. Glass selection matters next. Impact-rated glass, built to resist wind-borne debris without shattering, is heavier and more expensive to produce, so it adds real cost to the unit. Frame material matters too, though we’ve found most Orlando homeowners get the best value from high-quality vinyl frames with good thermal numbers.
The existing opening also affects the price. If the structural framing is sound and the rough opening is square, installation is straightforward. In older Orlando homes, especially ranch styles built in the 1970s and 1980s, we sometimes find rotted seat boards or inadequate support that needs repair before the new unit goes in. That gets priced into the written quote before work starts, not added on after.
We don’t hide the price to get you on the phone. The ranges above are what we quote in Orlando. For an exact number on your specific window, call (850) 679-8554 and we’ll schedule a free measure and estimate. The price we give you in writing is the price you pay.
Why Juniper Windows Orlando Handles Bay & Bow Windows Well
Bay and bow windows are more structural than a standard window replacement. You’re cutting a wider opening, adding outward projection, and asking the unit to hold up to Florida sun, wind, and rain for decades. That’s exactly the kind of project where install quality determines whether the window works for 10 years or 30.
We founded Juniper Windows & Doors in 2001 as part of the Relay Home Co. family, and bay and bow windows are a specialty we’ve done hundreds of times. If Juniper sounds like a fitting name for this work, it’s deliberate: the juniper is a hardy evergreen built to handle sun, wind, and cold, which is what a projecting window in Orlando faces every year.
We carry impact-rated units from PGT, CGI, and ES Windows, along with other product lines. When a homeowner near Conway or Metrowest asks about hurricane protection, we can show them an impact-rated bow window that meets Florida building code requirements without external shutters. That’s a decision you make once, not every time a storm develops in the Atlantic.
Every job is backed by the 365-Day Done Right Promise. If the installation isn’t right, we make it right. For a full year, parts and labor, in writing. No estimate that morphs into a surprise invoice, no vague language about what’s covered. When Sean Mackey puts a price on paper, that price is locked.
What You’ll Choose: Bay vs. Bow
This is the question people ask at the start of almost every consultation. The honest answer is that both styles work well in Orlando, and the call usually comes down to three things:
- Angle and footprint. A bay window angles at 30 or 45 degrees, which creates a sharper projection but a smaller footprint. A bow window’s gentle curve takes up more exterior wall width and provides a softer look.
- Panel count flexibility. A bay window is almost always three panels. A bow window is four, five, or six panels. If you want a wider view across a lake or a garden, bow windows scale better.
- Interior use. Bay windows naturally create a deeper ledge that works well for a window seat. Bow windows provide more of a curved nook feel. Both can be finished with custom trim and seating, and we’ll show you what each looks like in your specific room before you decide.
We’ll bring samples, show you panel configurations, and explain the U-factor differences between standard and impact-rated glass options. You’ll have the info you need to choose without feeling pushed.
Why We Prefer Impact-Rated Glass in Orlando
Living in Orlando means expecting afternoon thunderstorms every summer, and a named storm every few seasons. Impact-rated glass is built to resist wind-borne debris without shattering, and if it does crack, it holds together in a web pattern instead of sending glass shards through your living room. For bay and bow windows, which have more glass surface area than garden windows or a standard window, that protection matters even more. We recommend impact-rated units from PGT, CGI, and ES Windows for most bay and bow installations in the Orlando market, and we’ll give you the price difference in writing so you can decide with real numbers.
FAQs – Bay & Bow Windows
How much does it cost to install a bay window in Orlando?
A bay window installation in Orlando typically costs $3,800 to $5,800 for a standard three-panel vinyl unit, with impact-rated glass adding $1,500 to $3,000 depending on panel count. Call (850) 679-8554 for a free estimate and we’ll give you a written price for your exact window.
What’s the difference between a bay window and a bow window?
A bay window has three panels set at 30 or 45 degree angles, while a bow window has four or more panels arranged in a gentle curve, unlike casement windows which hinge at the side. Bay windows project more sharply and create a deeper ledge; bow windows are wider and softer-looking, making them a good match for bigger rooms and wider views.
Can you install a bay or bow window in an existing opening?
Sometimes, but not always. If the existing opening is wide enough and the structural support is sound, we can often convert a flat window to a bay or bow unit without major framing work. When the opening needs to be widened or support cables need to be added, that cost is included in your written quote before any work starts.
How long does bay or bow window installation take in Orlando?
Most bay and bow window installations in Orlando take one to two days from removal to final trim, similar to horizontal roller windows. Larger bow windows with five or six panels, especially with impact-rated glass, can take three days. We’ll give you a specific timeline with your written price.
Will a bay or bow window hold up to hurricanes?
Impact-rated bay and bow windows from PGT, CGI, and ES Windows are built to resist wind-borne debris without shattering, and they meet Florida building code requirements for wind-borne debris regions. We recommend them for most Orlando installations, especially for lakefront or second-story applications.
Get a Written Price for Bay & Bow Windows in Orlando
If you’ve been thinking about a bay or bow window, don’t wait until the next storm season reminds you. Call (850) 679-8554 and talk to a real person. We’ll schedule a free measure and estimate, show you panel configurations and glass options, and put a written price in your hands before you commit. If you go with Juniper Windows Orlando, you get the 365-Day Done Right Promise, a live arrival time, before-and-after photos, and a digital invoice you can pay from a link. No surprises, no vague pricing, no phone tag.
Call (850) 679-8554 today and tell us about your project. Sean Mackey and the team at Juniper Windows Orlando are ready to help. And if you’re still exploring, start with our home page or our Window Installation in Orlando page to learn more.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.