New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Orlando
Window installation in Orlando, FL typically runs $550 – $1,250 per opening for standard retrofit work, and $900 – $2,400 per opening when you’re pulling a full frame and adding impact-rated glass built for the Florida Building Code’s large-missile standard. We’re Juniper Windows Orlando, and we install across Orange County every week, from College Park bungalows to Avalon Park stucco builds to Lake Nona’s newer subdivisions. The biggest variable isn’t the brand of glass; it’s whether your existing frame can hold an impact unit or needs to come out. Call (850) 679-8554 and we’ll give you a written price before anything gets ordered.
Why Juniper Windows Orlando Is Orlando’s Preferred Window Installation Company
We’ve worked Orlando long enough to know that a window quote without a design pressure number is a guess. Homeowners here don’t get to ignore wind-load requirements, and they shouldn’t have to decipher them alone. Our crews pull permits on every job that requires one, and we hand you the product approval paperwork at close-out, not when an inspector or insurance underwriter asks for it six months later.
Sean Mackey leads the Orlando team, and the standard he sets is simple: a written price before any work starts, and a 365-Day Done Right Promise on everything we install. If it isn’t right, we make it right. Parts and labor, in writing, for a full year. No second-visit charge if something fails during that window.
Every Juniper technician is background-checked and uniformed, and our Orlando office answers the phone with a live person, 24/7. When a homeowner in Winter Park or SoDo calls on a Saturday morning with a leak around a recently installed unit, they reach a human who can actually do something about it.
We’re part of the Relay Home Co. family, founded in 2001. That’s more than two decades of installations across Florida, and the Relay Visibility Guarantee rides along on every Orlando job: a live arrival time you can track, before-and-after photos, a written price, and a digital invoice you can pay from your phone. No four-hour waiting windows, no quote that changes at the door.
Window Contractor in Orlando
A window contractor in Orlando has to do more than swap glass. The Florida Building Code, as amended by the city, keeps large-missile impact protection mandatory for replacement windows in wind-borne debris regions, which covers nearly every residential block in Orange County. That means the contractor you hire is either pulling a permit, marking up a Florida Product Approval set, and scheduling inspection, or they’re leaving you with an opening that fails code at resale. A compliant replacement window job in Orlando runs $700 – $1,800 per opening, including the permit and inspection trail. The glass alone isn’t the cost; it’s the documentation that goes with it.
Impact-Rated Replacement Work
In Orlando, we replace more single-pane aluminum than anything else. Homes built in the 1970s through the 1990s sit on concrete block with frames that corrode fast in the humidity. We quote full-frame replacement with PGT WinGuard or ECO Window Systems impact units because retrofitting laminated glass into a 1987 frame that was never tested as a system fails the Miami-Dade NOA requirement and voids the insurance credit.
Code-Compliant New Installations
For newer construction or additions, we install to the design pressure the opening actually requires, not a generic number. A standard bedroom window in an Orange County home typically needs a DP of at least ±50 PSF; a west-facing elevation on the windward side often specs higher. We put the exact rating on your quote so there’s no confusion when the inspector walks through.
Window Installers in Orlando
Window installers in Orlando who skip the permit are handing you a problem you won’t see until you sell or file a claim. Orange County can flag a non-permitted replacement at resale, and insurers cite it when denying a windstorm claim on a non-compliant opening. Our installers carry the paperwork with them, not behind them. A standard single-hung retrofit in the Orlando market starts around $550 per opening; a full-frame impact install with inspection typically lands between $1,100 and $2,400, depending on size and elevation.
Full-Frame vs. Retrofit
We tell every Orlando homeowner the same thing: a retrofit keeps your existing frame and costs less up front. A full-frame replacement costs more because we’re pulling the entire unit, checking the rough opening for rot or termite damage, and flashing it correctly against wind-driven rain. If your frame shows corrosion at the corners or the track shims are shot, retrofit isn’t an option.
What a Day of Installation Looks Like
You get a live arrival time before we show up. Our installers lay down floor protection, remove the old unit, prep the opening, set and seal the new window, and clean up. Before we leave, you get photos of the completed work and the product stickers for your records. The digital invoice hits your phone that afternoon.
Trusted Brands We Service in Orlando
Juniper carries and services eight product lines, and for Orlando’s wind-load requirements we lean hardest on PGT, ES Windows, and Therma-Tru. PGT WinGuard and ES Windows both carry Miami-Dade NOAs, which is the documentation path your insurer wants to see. Therma-Tru anchors our door work when a sliding glass door gets replaced alongside windows, which happens often in Orlando homes where builder-grade sliders from the 2000s have failed rollers and corroded tracks. We keep an inventory of Orlando-specific parts and glass in the local warehouse, so a single broken lite on a post-2004 Baldwin Park home doesn’t mean a two-week wait.
Common Window Installation Problems We See in Orlando Homes
- Corroded aluminum frames on 1980s and 1990s builds. The humid subtropical climate eats through untreated aluminum in about twenty years. We pulled the original 1987 single-pane sliders from a Conway ranch and found the jamb pockets packed with corroded track shims, which doubled the install time versus a clean retrofit.
- Failed low-e coatings on post-2004 homes. Baldwin Park and other newer developments were built under stricter wind-load codes, but the intense Florida sun breaks down low-e coatings faster than the glass fails. You see a hazy, milky film between the panes.
- Non-impact glass in wind-borne debris zones. A standard insulated glass unit without a laminated interlayer in a bedroom window leaves the home without large-missile protection and fails the Florida Product Approval markup on the permit set.
- Unpermitted replacements. We see it all over Pine Hills and Conway. A homeowner or a previous contractor swapped windows with no permit, and now the resale inspection flags it, or the insurance underwriter won’t extend the windstorm coverage.
Pricing for Window Installation in Orlando, FL
Here’s what you’re actually paying for in Orlando’s market. Standard retrofit without impact glass: $550 – $900 per window. Full-frame replacement with a Miami-Dade NOA impact unit: $900 – $2,400 per opening, depending on size, DP rating, and elevation. Bay or bow windows run $3,000 – $7,000 installed. Garden windows land around $1,800 – $3,500. The permit, the structural markup, and the inspection are baked into every quote we write, not bolted on after you sign. Call (850) 679-8554 for a written line-item price on your specific openings. Estimates are free.
We Also Serve Cities Near Orlando
Our Orlando crews cover the full metro, including Altamonte Springs, Casselberry, Ocoee, and Lake Mary. If you’re just outside the city limits and wondering whether anyone will actually show up for a quote, the answer is yes. Window Installation in Orlando is our home base, and the surrounding counties are part of the weekly schedule. Our Window Installation team handles jobs across Orange and Seminole counties with the same written-price standard.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Orlando
Yes. A replacement window in Orlando requires a permit and inspection when you’re changing the opening’s structural or wind-load characteristics, which an impact-rated retrofit almost always does. The city follows the Florida Building Code with the local amendment keeping large-missile protection mandatory in wind-borne debris regions, and Orange County enforcement is consistent on this. A contractor who tells you to skip the permit is saving you $150 today and handing you a resale and insurance problem later. Call (850) 679-8554 and we’ll pull the permit and schedule the inspection as part of the job.
Most residential openings in Orlando require a design pressure of ±50 PSF, with larger glazing on higher elevations sometimes spec’d to ±60 PSF. Miami’s HVHZ zone demands higher ratings because it sits on the coast, but Orlando’s inland wind-borne debris designation still requires large-missile impact protection, not the small-missile standard used further north. What matters is the stamped product approval matching the exact size and DP of your opening. Call (850) 679-8554 for an exact quote on your elevation.
No, it’s not automatic. The insurer wants a Uniform Mitigation Verification Inspection form, completed by a licensed verifier, that documents the Miami-Dade NOA or Florida Product Approval on each opening. We give you the product approval paperwork at close-out, but the mitigation inspection is a separate step most insurers require every five years. We’ll tell you exactly what to ask for. Call (850) 679-8554 and we’ll walk you through it.
Look at the corners first. White, chalky oxidation along the miter joints, rust-colored staining at the weep holes, or tracks that bind when you slide the sash all point to corrosion eating the frame from inside. You might also see the frame pulling away from the stucco or drywall, or condensation between panes that never clears. These are the earliest warnings on 1970s-90s Orlando homes with single-pane aluminum. Call (850) 679-8554 for a free inspection of your openings.
Keep the permit, the inspection sign-off, and the Florida Product Approval or Miami-Dade NOA for every opening. That paperwork trail is what a buyer’s home inspector and title company will ask for, and what a lender will verify for windstorm coverage. We hand you all three documents on the day the job closes, and we keep digital copies for seven years. Call (850) 679-8554 and we’ll make sure your file is complete before the first open house.
Ready for a written price on your Orlando window installation? Call (850) 679-8554 for a free estimate. Sean Mackey and the Juniper Windows Orlando team will walk your openings, spec the right DP rating, and put it all in writing before anything gets ordered.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando, FL.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.