New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Kissimmee, FL | Juniper Windows Orlando
We provide independent Therma-Tru service across Kissimmee, from 1980s slab homes off Pleasant Hill Road to vacation rentals near the Disney corridor. The difference here is the climate and the turnover: Kissimmee’s afternoon thunderstorms and short-term rental wear hit Therma-Tru doors harder than most places, so we stock the parts and know the failure patterns that matter locally. Call (850) 679-8554 for a written quote before any work starts.
Why Kissimmee Residents Choose Us for Therma-Tru Service
Our techs work on Therma-Tru doors and Kissimmee Window Installation daily in Kissimmee’s hot, humid, storm-prone conditions. We’re an independent service provider, not manufacturer-affiliated, which means we fix what’s actually broken instead of steering you toward a replacement whenever it’s easier for us. Sean Mackey, who leads our Central Florida crew, spent well over two decades focused on windows and doors specifically after learning the trade at Los Angeles Trade-Technical College. He’s the one walking your house at the end of every job, checking every sweep, weatherstrip, and latch before we call it done.
When we say we know Therma-Tru, we mean the real stuff: Fiber-Classic door slabs that swell at the bottom rail, Smooth-Star glazing beads that crack under UV, Tru-Defense multi-point locks that bind after a few hundred rental turnovers. We also carry genuine Therma-Tru replacement parts when available, and matched aftermarket components for older discontinued models. Every job gets a written price before we touch a screw, and our 365-Day Done Right Promise covers parts and labor in writing.
Common Therma-Tru Windows & Doors Problems We Solve in Kissimmee
- Swollen or delaminated door slabs at the bottom rail. The original 1980s Fiber-Classic entry doors in Kissimmee absorb moisture when the sweep or threshold cap wears out. High humidity plus direct stormwater contact means the bottom rail swells, the door drags, and eventually the skin separates. We replace the sweep and threshold cap before recommending slab replacement, but if the core is swollen, we’ll tell you straight.
- Compressed, dead weatherstripping. Central Florida heat bakes the rebound out of Therma-Tru weatherstripping. Once it flattens, conditioned air leaks out and your AC works harder. Older Kissimmee frame homes with original entry systems are the worst offenders. We replace weatherstripping with fresh OEM or matched aftermarket material and adjust the door so it compresses evenly.
- Binding or failed multi-point locks on Tru-Defense doors. Short-term rentals near the Disney corridor see hundreds of lock cycles a year. The multi-point mechanism on Tru-Defense doors takes a beating and eventually binds or stops throwing the top and bottom bolts. We rebuild or replace the lock body and align the strike plates so the door locks with one hand again.
- Cracked glazing beads and door sweeps from UV exposure. Smooth-Star doors sitting in direct afternoon sun on Kissimmee’s 1970s and 80s homes get brittle. The glazing bead cracks, the sweep curls, and wind-driven rain pushes under the door during summer storms. We replace both and check the astragal while we’re there.
- Faded Therma-Tru door faces from extreme sun load. Fiberglass doors fade unevenly depending on orientation and overhang depth. A south- or west-facing door in Kissimmee without a porch takes direct UV for hours daily. Full refinishing restores the color; replacing the door isn’t always necessary.
Therma-Tru Service in Kissimmee: What Local Conditions Mean for Your Equipment
Here’s something that sets Kissimmee apart from Orlando or Altamonte Springs. Many original Therma-Tru entry doors on 1980s slab homes in Kissimmee sit under shallow roof overhangs, sometimes only a few inches deep. When an afternoon thunderstorm rolls through, the door face takes direct wind-driven rain with almost no protection. That water follows gravity to the bottom of the door, where a worn sweep or flattened threshold cap lets it run into the entryway and pool against the threshold. We routinely reinforce door sweeps and astragals on these homes. In Orlando’s newer stucco communities with deeper porches and covered entries, you simply don’t see this pattern. Our crew reset a Therma-Tru Fiber-Classic entry door on a 1987 home off Pleasant Hill Road near the old Kissimmee downtown. The original bottom sweep was curled and the threshold cap was worn flat, so rain ran under the door and warped the oak threshold. We replaced the sweep with a heavy-duty vinyl insert, installed a new aluminum threshold cap, and adjusted the door so the sweep compressed evenly. The owner said the entry stayed dry through the next two storm cycles.
Therma-Tru Models & Products We Service in Kissimmee
We work on Therma-Tru’s core residential lines: Fiber-Classic (the original fiberglass door line, still common on Kissimmee homes from the late 1980s through the 2000s), Smooth-Star (smooth-face fiberglass doors popular in newer builds), Tru-Defense (impact-rated entry systems built for hurricane zones), and Pulse (Therma-Tru’s newer line with clean sightlines, common in vacation rental upgrades). For parts, we use genuine Therma-Tru components when they’re available: sweeps, threshold caps, multi-point lock bodies, weatherstripping, glazing beads. For older discontinued models, we match high-quality aftermarket components that hold up as well or better in Kissimmee’s humidity. Locally, we keep the common weatherproofing parts on hand so most entry door calls don’t wait on a shipment. The full lineup also includes our broader Therma-Tru sales & service coverage across Central Florida.
Therma-Tru Service Pricing in Kissimmee
Straight numbers, because you shouldn’t have to call just to get a ballpark. Entry door sweep replacement on a Therma-Tru unit runs $110 to $185. Threshold cap replacement runs $140 to $240. Weatherstripping replacement runs $95 to $175 depending on the door perimeter. Multi-point lock replacement on a Tru-Defense door runs $320 to $540 including the lock body and labor. Full slab replacement with a new Fiber-Classic or Smooth-Star door starts around $2,100 installed and moves up based on glass package, impact rating, and hardware. A patio door glass swap to impact-rated runs $650 to $1,200 depending on size and whether the sash needs to be rebuilt. Every job gets a written line-item quote before any work starts. Call (850) 679-8554 for an exact quote on your Kissimmee Window Replacement.
Serving Kissimmee, FL - Our Local Coverage Area
We’re based in the Kissimmee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Kissimmee
Humidity makes the door slab swell slightly, which pushes the latch and multi-point bolts out of alignment with the strike plate. On Kissimmee homes, we see this most on doors with worn weatherstripping that no longer keeps moisture out of the slab edge. The fix is usually a combination of adjusting the hinges, realigning the strike, and replacing compressed weatherstripping. Call (850) 679-8554 and we’ll diagnose it on site.
Yes, in most cases. If the frame and roller system are sound, we can swap the glass pack for an impact-rated unit and rebuild the sash around it. For older Therma-Tru patio doors where the frame is twisted or the track is worn, full replacement makes more financial sense. Call (850) 679-8554 for a quote on either path.
Usually not. Hard slamming typically means the closer is worn or the door is slightly out of alignment, so the latch catches before the frame fully stops it. We replace the closer, adjust the sweep, and check the hinges. If the door face is still solid and the lock functions, we repair rather than replace. Call (850) 679-8554 and we’ll tell you which way to go.
The side facing direct sun fades from UV exposure while the shaded side holds its color. In Kissimmee, this happens on south- and west-facing doors without porches or with shallow overhangs. The fade doesn’t hurt the door structurally, but refinishing restores the even look. If the door is also warping or the skin is separating, replacement may be the better call.
It depends on the scope. A like-for-like slab replacement in an existing frame usually doesn’t trigger a permit, but swapping to an impact-rated door with a new frame often does, especially if you’re in a historic district near downtown Kissimmee. We handle the permit paperwork when it’s needed, and every installation passes inspection before we close the job. Call (850) 679-8554 and we’ll check your specific property.
Service Areas Near Kissimmee
Our Kissimmee crews also cover Orlando, Altamonte Springs, Clermont, and the surrounding Central Florida communities. If you’re comparing options, we also provide Therma-Tru service in Altamonte Springs and Therma-Tru service in Orlando. For a full look at our coverage, see our Kissimmee service area page.
Book Your Therma-Tru Service in Kissimmee Today
The number you need is (850) 679-8554. We’ll schedule a visit, send you a written quote, and handle the repair or replacement from there. If I wouldn’t put it on my own house, I’m not putting it on yours.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Kissimmee and Central Florida.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.