New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Orlando, FL | Juniper Windows Orlando
We provide Therma Tru sales & service for entry doors and windows across Orlando as an independent provider, not a manufacturer-authorized dealer. What that means for you is straight talk: we stock OEM Therma-Tru parts in our Orlando operation and we know exactly how these doors fail in Florida’s humidity, because we’ve rebuilt them in neighborhoods from Conway to Baldwin Park. Call (850) 679-8554 for a free estimate, and you’ll get a written price before anything gets ordered.
Why Orlando Residents Choose Us for Therma-Tru Service
Therma-Tru builds a solid fiberglass door, but Central Florida humidity tests every seal, sweep, and hinge on it. Our crew has been working on these doors for over a decade, and we’ve learned which models hold up in Orlando’s climate and which ones don’t. Sean Mackey, who runs Juniper Windows Orlando, came up through Los Angeles Trade-Technical College and has spent more than twenty years focused on windows and doors specifically, not siding, not roofing. That focus matters when you’re diagnosing why a Therma-Tru Classic-Craft slab is binding against its frame during a wet July afternoon. We use OEM parts for the precision stuff: hinges, weatherstripping, cam-sweep assemblies. And we don’t make you wait around all day. Our booking system gives you a live arrival time you can track, before-and-after photos, and a digital invoice. A real person answers the phone 24/7.
Common Therma-Tru Windows & Doors Problems We Solve in Orlando
Here’s what we actually see across the metro, door by door. If any of this sounds familiar, it’s worth a call at (850) 679-8554.
- Fiberglass slab warping and binding from heat and humidity. Therma-Tru’s fiberglass doors resist rot far better than wood, but Orlando’s wet season still pushes them. A slab that was square in January can bind at the top hinge by August. We see it most on west-facing entries in Conway and College Park, where afternoon sun beats on the door before a thunderstorm soaks it. Usually it’s a hinge adjustment and new weatherstripping. Sometimes the slab itself is done and a replacement makes more sense than repeated fixes.
- Seal failure and fogging in triple-pane door glass. Thermal cycling from Florida’s intense UV exposure cracks the seal on Therma-Tru glass inserts over time. Once moisture gets between the panes, the lite is done. We replace failed glass packs rather than letting owners live with a fogged-up door. It’s common on homes built in the early 2000s, where low-e coatings baked under a decade of sun.
- Sagging or stripped hinge screws on inswing units. Rental properties and multi-occupant houses in Pine Hills and other close-in neighborhoods put real wear on entry doors. Kids hanging on a door, tenants propping it open, heavy traffic. The original #2 screws strip out of the hinge stile, and the door starts dragging. The fix is stainless steel screws long enough to bite into framing, not the original stubby ones. We do this constantly.
- Deteriorated bottom sweeps and wind-driven rain intrusion. Summer thunderstorms here don’t drizzle. They hit sideways. A Therma-Tru bottom sweep that’s fine in a dry climate gets shredded by wind-driven rain and the slab’s constant expansion. Water creeps under, rots the subfloor at the threshold. We replace sweeps with a rain-guard threshold when needed. On rental units, we’ll often recommend a higher-durability aftermarket sweep because property managers care more about longevity than exact factory match.
- Failed multi-point hardware on older Therma-Tru entry systems. Therma-Tru’s multi-point locks are nice until one point stops retracting. In Orlando’s grit and humidity, that happens sooner than the sales brochure suggests. We stock replacement hardware in our Orlando operation, so most hardware swaps happen same visit rather than after a two-week parts delay.
Therma-Tru Service in Orlando: What Local Conditions Mean for Your Equipment
No other major Florida metro combines Orlando’s 1970s-to-1990s concrete-block housing stock with post-2002 stucco subdivisions the way this city does, which is why Orlando Window Installation requires specialized local knowledge. Most coastal metros either have older frame beach houses or newer code-compliant construction, not the mix we work in. What that means for a Therma-Tru owner: if your home is one of the thousands of block houses built between 1975 and 1995, the rough opening for your entry door was cut for a builder’s-grade steel or wood unit, often smaller and less plumb than what Therma-Tru’s current line assumes. Retrofit here frequently requires custom width adjustments and sill adaptations we rarely see in places like Tampa or Jacksonville, where framing is more standardized. A Classic-Craft slab can’t just drop into an opening that’s shifted an eighth of an inch out of square over thirty years. Our techs shim, trim, and reframe the opening properly, which is the difference between a door that latches cleanly and one that fights you every time. In neighborhoods like Conway, where 1980s block homes have original steel entries with rotted wood bucks, this adaptation work is standard, not an upcharge. We know the openings because we’ve measured hundreds of them.
Therma-Tru Models & Products We Service in Orlando
We work on the full Therma-Tru residential lineup. That’s Classic-Craft, the fiberglass slab with deep wood-grain embossing. Fiber-Classic, which is the budget-leaning fiberglass line that still holds up better than steel in our salt air. Smooth-Star, the smooth-skinned option that’s easy to clean and shows every ding if you’re not careful. And Pulse, Therma-Tru’s smart lock and sensor line, which has its own quirks in Orlando’s heat. On the parts side, we keep OEM Therma-Tru hinges, weatherstripping, and cam-sweep assemblies stocked locally for fast turnaround. For high-wear hardware like bottom sweeps on rentals, we’ll recommend aftermarket options when durability beats exact match. Our honesty on repair-versus-replace hasn’t changed in a decade: if the slab is warped or the glass seal has failed past its tenth year, a new Therma-Tru insert often costs less over time than chasing seals and hinges every season. Our free estimate covers a full assessment, written prices, and no obligation.
Therma-Tru Service Pricing in Orlando
Therma-Tru service in Orlando typically runs these ranges, and unlike most shops, we’ll write them down before we touch your door.
| Service | Typical Range |
|---|---|
| Standard Therma-Tru hinge adjustment, re-alignment, and re-lube | $95 – $170 |
| Bottom sweep, threshold, and cam-sweep assembly replacement (parts and labor) | $130 – $250 |
| Weatherstripping replacement along the frame, full perimeter | $110 – $200 |
| Triple-pane door glass pack replacement, including the new lite and labor | $325 – $650 |
| Full Therma-Tru Classic-Craft or Fiber-Classic entry door replacement, installed into an Orlando block or stucco opening | $1,600 – $3,400 |
Your price depends on your opening’s condition, the specific model, and whether we’re adapting a block rough opening or working with a standard frame. A free estimate gets you a line-item written price and a look at the actual door. Call (850) 679-8554 to schedule.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Orlando
Because the slab absorbs moisture and expands, and Orlando’s July and August humidity are brutal enough to move fiberglass a sixteenth of an inch. That’s enough to make the door bind at the top hinge. We fix this with hinge adjustment, new weatherstripping, and in some cases a slight strike-plate repositioning. If the slab itself has warped beyond adjustment, replacement is the honest fix. Call (850) 679-8554 and we’ll tell you which one you’re dealing with.
Yes, in most cases. Block homes from the 1970s-90s have rough openings that are rarely square and often smaller than today’s standard Therma-Tru pre-hung dimensions. We custom-fit the opening on site: shimming, trimming, sill adaptation, and stainless steel anchors into the block. It’s specialized work, but it’s what our crew has done for years in Conway, Pine Hills, and around Lake Nona. No major reframing in the vast majority of cases.
Stripped hinge screws and destroyed bottom sweeps. Tenants, guests, kids: high-traffic doors get abused, and the original hardware wasn’t built for it. We replace the hinge screws with stainless steel versions long enough to bite into the rough opening framing, and we’ll install a heavier-duty aftermarket sweep on rental units when the owner wants it to last through turnover. Call (850) 679-8554 to get a written price for the repair.
Yes. The sun bakes the door daily, and when the thermal cycling eventually breaks the seal between the panes, humid Orlando air gets inside and fogs the glass. The only real fix is replacing the glass pack, not resealing it. We stock Therma-Tru lites and can usually get a replacement installed in a single visit. Call for current pricing: (850) 679-8554.
For most Orlando homeowners, yes. Wind-driven rain does more damage here than wind alone, and a hurricane-rated Therma-Tru door has the reinforced frame, impact glass, and weatherstripping to handle both. If your current door is a 1990s steel unit with a rotted wood buck, the upgrade pays for itself the first time a storm soaks the threshold. For a door-by-door price comparison or to learn more about Orlando Window Replacement, call (850) 679-8554 and we’ll put it in writing.
Service Areas Near Orlando
Our Orlando crew covers the metro properly. That includes Orlando service area neighborhoods like Conway, College Park, Baldwin Park, and Pine Hills, plus surrounding cities: Therma-Tru service in Kissimmee to the south, Therma-Tru service in Altamonte Springs to the north, Clermont to the west, and Lake Mary up toward I-4. If you’re in Central Florida and the drive is reasonable, we’ll come.
Book Your Therma-Tru Service in Orlando Today
Call (850) 679-8554 and you’ll talk to a real person, not a voicemail maze. We’ll schedule a free estimate, give you a written price before any work starts, and come back with the right Therma-Tru parts on the truck. Same-week and sometimes same-day service is available for most Orlando repairs. If I wouldn’t put it on my own house, I’m not putting it on yours.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.