New Window Installation Cost - Written Price Before Anything Is Ordered

How Much Does New Window Installation Cost in Orlando?

New window installation in Orlando typically costs $450 to $1,400 per window including materials and labor, with most homeowners paying $7,500 to $14,000 for a full-house project of 10 to 15 windows. Impact-rated windows required for hurricane protection run higher, usually $800 to $2,100 per window depending on size and frame material. The final price depends on glass type, frame material, window size, and whether the existing frame needs repair or full replacement.

Key Takeaways

• Per-window cost: $450 to $1,400 installed, with impact-rated units starting around $800.
• Whole-home project (10 – 15 windows): $7,500 to $14,000, sometimes more for custom sizes or second-story work.
• Orlando building code requires impact-rated or protected openings in most residential applications, which adds cost but is non-negotiable for permitting.
• Labor typically runs $150 to $400 per window for a standard pocket replacement; full-frame installation costs more.
• Permits in Orlando and Orange County usually run $150 to $600 depending on the scope of work and number of openings.
• Our home page has more on how Juniper handles window projects from quote to final inspection.

New Window Installation Cost Breakdown (2026)

Here’s what homeowners in Orlando can expect to pay in 2026, based on the current market for materials and labor across Orange County:

These numbers reflect what we’re seeing across Orlando in 2026 for new window installation in Orlando, from Winter Park to Dr. Phillips. Prices shift with material availability and the complexity of the existing opening, but the ranges above hold for most standard residential work.

What Drives Costs Up or Down

The single biggest factor is impact-rated glass. Orlando sits in a high-velocity hurricane zone under Florida Building Code, and most permitted window replacements require either impact-rated units or an approved shutter system over standard glass. Impact-rated glass (laminated with a polymer interlayer that holds shards in place when debris hits) routinely adds 40 to 60 percent to the per-window cost. A three-bedroom ranch in Altamonte Springs might need 12 impact-rated windows at $950 each, while a home in Windermere with custom arch-top units and second-floor installation could hit $1,800 per opening. Frame material matters too: vinyl is the most affordable, aluminum runs slightly higher, and anything custom-ordered in a specialty color or wood-clad interior pushes the number up fast. The condition of the rough opening is the wild card. Rotted wood or water-damaged framing in older Orlando homes (think 1970s builds in Pine Hills or Azalea Park) converts a simple pocket install into full-frame work, adding $200 to $400 per window.

What Affects New Window Installation Pricing in Orlando

No two Orlando window projects price the same. Here are the factors that move the number:

• Impact-rated versus standard glass. Florida Building Code requires impact protection for most window openings in wind-borne debris regions. Impact-rated windows use laminated glass and reinforced frames. They cost more upfront but eliminate the need for shutters and often cut home insurance premiums by 10 to 30 percent in Orange County.
• Window size and custom shapes. A standard 36-by-48 double-hung is the least expensive configuration. Arched windows, picture windows, radius shapes, and oversized sliders require custom fabrication and more involved installation, which can double or triple the per-unit cost.
• Frame material. Vinyl is the budget-friendly workhorse. Aluminum is better for large openings and modern architecture but performs worse on U-factor (how well the window insulates). Premium options like impact-rated aluminum with thermal breaks or wood-clad interiors add cost and installation complexity.
• Single-story versus second-floor installation. Second-story work requires ladders, scaffolding, or lifts, plus extra safety measures. Expect a $50 to $150 per-window labor premium in neighborhoods like Thornton Park or Delaney Park, where two-story brick homes are common.
• Condition of the existing rough opening. Water intrusion, rusted fasteners, or dry rot around the frame means the installer must reframe and re-flash the opening before setting the new window. In Orlando’s humid climate, this is more common than homeowners expect, especially in older frame construction near lakes and conservation areas.
• Time of year and contractor demand. Hurricane season prep (May through August) and post-storm repair rushes spike demand. Booking in slower months like November through February can mean faster scheduling, though Orlando’s mild winters don’t create the same discount pressure seen in northern markets.

Every one of these variables lands in our written quote before any work starts. There’s no “we’ll figure it out at the door” with Juniper. The price you see is the price you pay, covered by our 365-Day Done Right Promise, parts and labor, in writing.

Common Window Types and What They Cost in Orlando

Different window styles serve different Florida homes. Here’s how the pricing breaks down by type in the Orlando market:

• Single-hung windows: $320 to $750 installed. The bottom sash moves, the top is fixed. The most economical option and common in rental properties and starter homes across east Orlando.
• Double-hung windows: $400 to $900 installed. Both sashes move, which makes cleaning easier and improves ventilation. The most popular style in Orlando’s older neighborhoods like Audubon Park and Colonialtown.
• Casement windows: $500 to $1,100 installed. Hinged at the side and crank outward. They seal tight when closed, which helps with energy efficiency in Orlando’s hot, humid summers.
• Sliding windows: $380 to $850 installed. A horizontal track design that works well in ranch homes and mid-century builds. Common in Conway and Belle Isle.
• Picture windows: $500 to $1,400 installed. Fixed glass with no operable sash. Larger sizes climb fast, especially with impact-rated glass. Popular in lakefront homes seeking unobstructed views.
• Awning windows: $420 to $900 installed. Hinged at the top and open outward. Often paired with picture windows or used in bathrooms where privacy and ventilation matter equally.
• Bay and bow windows: $1,800 to $4,500 installed. Projecting combinations of three to five windows. These require structural support and finish work, which drives labor well above a standard pocket replacement.

Juniper carries eight product lines including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so we’re not locked into one manufacturer’s pricing sheet. If a mid-range PGT double-hung fits your budget better than a premium CGI casement, we’ll tell you. The right window for your home is never a compromise.

Orlando Building Code and Permit Requirements

Orlando enforces the Florida Building Code with local amendments through the City of Orlando Permitting Services Division. For window replacement, the code requires two things: a permit for any window that’s being replaced (not just repaired), and compliance with wind-load and impact-protection standards based on your property’s location within the wind-borne debris region. Most of Orange County falls within this region, which means impact-rated windows or an approved shutter system over standard glass.

Permit fees for residential window replacement in Orlando typically run $150 to $600 depending on the number of openings and whether the project triggers structural review. A straightforward pocket replacement of five windows usually sits at the lower end. Full-frame work or projects involving load-bearing headers can exceed that. Juniper handles the permit paperwork as part of the project. The cost appears as a line item on your written quote, not as a surprise at the end.

One Orlando-specific note: homes in historic districts like Lake Eola Heights or Thornton Park may face additional design review requirements. The city’s Historic Preservation Board can require specific window styles, materials, or divided-light patterns that affect cost and lead time. If your home falls within a historic overlay, we’ll flag that during the estimate and factor it into the written price.

Energy Efficiency and U-Factor: What Orlando Homeowners Need to Know

Orlando’s climate puts two demands on a window: it must reject solar heat gain during the long cooling season, and it must seal tightly enough to keep humid outside air from leaking in. U-factor measures how well a window insulates against heat transfer. Lower is better. For Orlando’s climate zone, the U.S. Department of Energy recommends a U-factor of 0.35 or lower for most residential windows, though impact-rated units often land between 0.30 and 0.40 depending on the glass package.

Solar Heat Gain Coefficient (SHGC) matters just as much here. SHGC measures how much solar radiation passes through the glass. In Orlando, where air conditioning runs eight to ten months a year, a lower SHGC (0.25 or less) means less heat entering the home and lower cooling bills. Standard clear glass has an SHGC around 0.70, which is why non-upgraded windows in older Orlando homes make AC units work far harder than they should.

Expect to pay $60 to $200 extra per window for a low-E, low-SHGC glass package over standard clear glass. That upgrade typically pays for itself within five to seven years through reduced cooling costs, especially for west-facing and south-facing windows that take the brunt of Orlando’s afternoon sun. Homes in neighborhoods with significant tree canopy, like College Park or Delaney Park, sometimes see less dramatic savings on shaded elevations. East-west exposures in newer subdivisions with minimal shade (think Lake Nona or Horizon West) benefit most.

How to Save on New Window Installation

You don’t have to sacrifice quality to keep a window project within budget. Here’s what actually works in the Orlando market:

• Replace in phases rather than all at once. Prioritize windows with failed seals, fogged glass, or visible frame damage. Then tackle the rest as budget allows. Juniper quotes each phase separately, so you always know the number before committing.
• Choose standard sizes over custom dimensions. Stock-size windows cost 20 to 40 percent less than custom-fabricated units. If your rough opening accommodates a standard size with minimal trim work, that’s real savings.
• Go with vinyl frames over aluminum or wood-clad. Vinyl offers the best price-to-performance ratio for Orlando’s climate. It handles humidity well, requires no painting, and costs less to purchase and install than aluminum or composite alternatives.
• Compare impact-rated options across product lines. PGT’s WinGuard series and ECO Window Systems’ impact line both meet Florida Building Code requirements but may price differently depending on size and glass package. We’ll show you options from multiple manufacturers, not just one.
• Bundle windows with door replacement. If you’re already planning to replace a front door or sliding patio door, combining projects into a single permit and a single mobilization saves on permit fees and labor. Juniper handles doors through the same team, with Therma-Tru and ViewLux among our product lines.
• Check for utility rebates. OUC (Orlando Utilities Commission) and Duke Energy periodically offer rebates for energy-efficient window upgrades. These programs change year to year, but they’re worth checking before you finalize your order. Juniper can point you toward current program details.

Every Juniper project starts with a free estimate. Call (850) 679-8554 and we’ll send a background-checked, uniformed technician to measure your openings, assess the condition of existing frames, and hand you a written price on the spot. No pressure, no adjustment at the door. That’s the Relay Standard: written price, live arrival time, before-and-after photos, and a digital invoice you can pay from a link.

Why Impact-Rated Windows Are Worth the Investment in Orlando

Orlando doesn’t sit on the coast, but it’s squarely in hurricane territory. Hurricane Charley in 2004, Irma in 2017, and Ian in 2022 all brought wind gusts to Central Florida that exceeded 70 mph, far beyond what standard residential windows are tested to handle. Impact-rated windows are built to resist wind-borne debris without shattering, using laminated glass with a polymer interlayer that holds the pane together even when a 2×4 strikes at 34 mph in laboratory testing.

The financial case goes beyond storm protection. Most Florida homeowners see insurance premium reductions of 10 to 30 percent after installing impact-rated windows, because insurers recognize the reduced risk of wind-driven water intrusion. Over a 10-year period on a $2,800 annual premium, that’s roughly $2,800 to $8,400 in savings. The windows also block UV radiation that fades furniture and flooring, and the laminated glass cuts outside noise significantly, a real benefit in busier Orlando corridors like Semoran Boulevard or Colonial Drive.

Juniper installs impact-rated windows from PGT, CGI, CWS, ES Windows, and ECO Window Systems. Each product line has different price points and performance specs, and we’ll walk you through those differences in plain language. Impact-rated doesn’t mean one-size-fits-all: a PGT WinGuard single-hung prices differently than a CGI Estate casement, and the right choice depends on your home’s exposure, your budget, and your insurance requirements.

FAQs – New Window Installation Cost

How much does it cost to install 10 windows in Orlando?

Installing 10 standard vinyl windows in Orlando typically costs $6,000 to $10,500 including labor and permits. If the project involves impact-rated glass, expect $9,000 to $16,000 depending on frame material and window style. Call (850) 679-8554 for an exact quote on your specific openings, and we’ll put the number in writing before any work starts.

Is it cheaper to repair or replace a window in Orlando?

Repairing a window in Orlando costs $120 to $450 for common issues like failed seals, broken sashes, or damaged hardware. Replacement costs $450 to $1,400 per window. The repair-versus-replace decision hinges on frame condition: if the frame is solid, repair makes sense for isolated problems. If you’re seeing fogged glass, drafts, and rising energy bills across multiple windows, replacement usually delivers better long-term value. We’ll assess your windows honestly, not steer you toward the bigger ticket.

How much does impact glass cost per window in Orlando?

Impact-rated glass in Orlando adds $250 to $700 per window over standard glass, putting most impact-rated units between $800 and $2,100 installed depending on size and frame material. That premium buys laminated glass that meets Florida Building Code wind-borne debris requirements and typically qualifies for insurance discounts.

Can you install windows the same day in Orlando?

For most standard replacements, yes. Pocket installations of stock-size windows can often be completed same-day once materials are on hand. Full-frame work, custom sizes, and impact-rated orders typically require a 1 to 3 week lead time for fabrication. Call (850) 679-8554 and we’ll give you a realistic timeline based on the specific windows you need and what’s available from our eight product lines.

Do I need a permit to replace windows in Orlando?

Yes. The City of Orlando requires a permit for residential window replacement, with fees typically ranging from $150 to $600 depending on project scope. Juniper handles the permit application, inspections, and closeout as part of the project. The permit cost is itemized on your written quote before work begins, so there’s no line item that surprises you later.

How long does window installation take in Orlando?

A standard 10-window replacement in Orlando takes 1 to 3 days of on-site work. Impact-rated projects with full-frame replacement or stucco repair around openings may run 3 to 5 days. Weather delays are rare in Orlando’s dry season (November through April), but afternoon thunderstorms in summer can pause exterior work for a few hours. We’ll give you a schedule before we start and keep you updated through the Relay Visibility Guarantee throughout the project.

Why Orlando Homeowners Choose Juniper Windows & Doors

Juniper is a hardy evergreen built to handle sun, wind, and cold, which is a fitting name for what windows and doors have to endure in Florida. We’re part of the Relay Home Co. family, founded in 2001, and we’ve spent more than two decades installing windows and doors across the Orlando market. That experience matters when a 1970s frame in Conway reveals hidden rot, or when a lakefront home in Windermere needs custom impact-rated glass that matches the original sightlines.

Led by Sean Mackey, our team operates on The Relay Standard: book in a tap, get a live arrival time you can track, receive before-and-after photos of every job, and pay from a digital invoice. Every project starts with a written price. Every project ends with the 365-Day Done Right Promise: if the work isn’t right, we make it right, parts and labor, for a full year. If a repair fails within that window, the second visit is free, no charge, no argument.

We answer the phone 24/7 with a real person. No voicemail maze, no callback queue. When you call (850) 679-8554, someone picks up. That’s the standard we’ve held since day one, and it’s the standard we’ll bring to your window project.

Written by Sean Mackey, Owner at Juniper Windows Orlando, serving the Orlando market since 2001. Pricing reflects the Orlando market as of 2026. Juniper Windows Orlando offers free estimates, call (850) 679-8554.