New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Window Installation for Orlando Homeowners
Window installation in Orlando is not just about curb appeal. It is about surviving hurricane season, managing brutal August heat, and slashing the electric bill that AC units run up from May through October. Juniper Windows Orlando has installed windows across Orange County since 2001, so we know exactly what Central Florida humidity does to a bad seal or a cheap frame. Led by Sean Mackey, our crew handles everything from single-window swaps to whole-home replacements, always with a written price before the first screw turns. You will not get a vague estimate that morphs into a surprise invoice. You get a number, in writing, backed by the 365-Day Done Right Promise. Call (850) 679-8554 to schedule a free estimate. A real person answers, 24/7.
Key Takeaways
- Window installation in Orlando typically runs $55 to $85 per square foot for mid-range vinyl, $90 to $160 per square foot for impact-rated glass, depending on frame material and glass package.
- Every Juniper job starts with a written price before work begins. That number does not change unless the scope changes in writing.
- We are the window and door specialist inside the Relay Home Co. family, founded in 2001, with eight product lines on the shelf.
- The 365-Day Done Right Promise covers parts and labor for a full year after installation. If it is not right, we make it right.
Casement Windows
Casement windows hinge on one side and crank outward, sealing tight against the frame when locked. In Orlando, we recommend them for homeowners who want maximum airflow and an airtight seal against humidity and rain. Juniper Windows Orlando installs casement windows for $450 to $950 per unit, depending on size, frame material, and glass package. You get a written price for the full job before any work starts, so there is no guessing at the end of the day.
Crank Operation and Weather Sealing
Casement windows press the sash against the weatherstripping as the crank closes, creating a seal that sliding windows in Orlando simply cannot match. That matters when afternoon thunderstorms roll through and wind-driven rain hits the side of the house. The hardware matters too: we use multi-point locking systems that pull the sash tight at three points, not one.
Where Casements Work Best in Orlando Homes
Kitchens over the sink, bathrooms that need ventilation, and any wall where you want to catch the evening breeze. In neighborhoods like Doctor Phillips and Union Park, casements are popular on ranch homes where double hung windows feel dated. They also work well on the first floor for security, since the hooked locking points resist prying.
Double Hung Windows
Double hung windows are the classic two-sash design where both the top and bottom panels slide vertically. They are the most requested style we install in Orlando because they fit nearly every architectural style and clean easily from inside. Juniper Windows Orlando installs double hung windows for $400 to $800 per unit. Labor is included in that range, and the written quote you get before we start is the price you pay when we finish.
Tilt-In Sashes for Florida Cleaning
Both sashes on a modern double hung tilt inward, so you can clean the exterior glass from inside the house. That is a real advantage on second-story bedrooms in places like Lake Mary and Wekiwa Springs where dragging a ladder around is the alternative. It also makes seasonal maintenance far less of a chore.
Ventilation Control
Double hung windows let you open the top sash, the bottom sash, or both. Hot air exits through the top, cooler air enters through the bottom. For Orlando homeowners who want airflow without the full commitment of opening a casement, double hung remains the practical choice. We stock them in vinyl and impact-rated glass packages for homes that need storm protection.
Vinyl Windows
Vinyl windows are framed with PVC that never rots, never rusts, and never needs painting. In Orlando, where wood frames swell in humidity and aluminum frames sweat, vinyl has become the default choice for most replacement projects. Juniper Windows Orlando installs vinyl windows for $350 to $700 per standard unit. The price depends on glass options like Low-E coatings, argon fills, and impact rating.
Thermal Performance That Holds Up
Vinyl frame corners are fusion-welded, which means they are effectively one solid piece of PVC, not a mechanical joint that can separate. Combined with Low-E glass and argon fill, a good vinyl window can bring a U-factor down to 0.27 or lower. On a west-facing wall in Clermont or Ocoee, that translates directly to a cooler room in July.
Maintenance You Never Think About
Vinyl windows do not need paint, stain, or sealant touch-ups. The color runs through the entire extrusion, so a scratch does not expose raw wood or bare metal. For homeowners in Casselberry or DeBary who want to set and forget their windows for 20 years, vinyl is the low-maintenance answer. We carry ECO Window Systems and ES Windows vinyl lines, both designed for coastal and tropical climates.
Picture Window
A picture window is a single fixed pane that does not open, designed to frame a view and maximize daylight. Orlando homeowners use picture windows for lake views in DeBary, golf course sightlines in Doctor Phillips, and bright living rooms anywhere in Orange County. Juniper Windows Orlando installs picture windows for $500 to $1,400 per unit, depending on glass size and whether impact-rated glazing is required.
Glass Size and Impact Requirements
A picture window is only as good as the glass in it. Large spans need thicker glass to handle wind load, and Florida building code requires impact-rated glazing or shutters on openings in wind-borne debris zones. We size the glass to the opening, calculate the required design pressure, and install the package your location demands. No shortcuts on the structural side.
Pairing Picture Windows with Operable Units
Most Orlando homes combine a picture window with bay & bow windows, casements, or double hungs on either side to keep ventilation. That configuration gives you a wide, uninterrupted view in the center and airflow at the edges. We help you lay out the exact combination based on the wall dimensions and how you actually use the room.
Bay Window Installation
3-Panel Sliding (3-Lite Roller) Windows and bay window installation add a three-panel projection to an exterior wall, creating a small ledge and more floor area inside the room. It is one of the more involved installs we do in Orlando because it requires framing support, a custom roof or seat board, and careful flashing work. Juniper Windows Orlando handles bay window installation for $2,500 to $6,000 per bay. The range reflects the size, roof treatment, and glass package.
Structural Support and Waterproofing
A bay window is a structural element, not just a glass box. The headers, support cables or knee braces, and exterior flashing all have to meet Florida wind load requirements. Our installers build the seat board and exterior canopy so water sheds away from the house, not toward it. In Orlando’s rainy season, a poorly flashed bay becomes a leak inside six months. We do it so it will not.
Style Choices That Fit Orlando Homes
Bay windows can be angled, boxed, or circular-top. On brick ranches in Altamonte Springs or wood-frame homes in Orlovista, a bay window changes the feel of a living room or breakfast nook instantly. We help you pick a depth and projection that fits the exterior style and the interior space without overwhelming the wall.
Window Contractor
A window contractor is the licensed professional who orders, installs, and warrants your windows. Juniper Windows Orlando is a dedicated window contractor in the Relay Home Co. family, focused only on window and door work since 2001. We do not dabble in general remodeling. Our window installation projects in Orlando run $350 to $1,400 per window for standard replacements, and $2,500 to $6,000 for awning & hopper or bow builds. The written quote covers material, labor, disposal, and any permits required.
Why Specialization Matters
Window installation has its own learning curve: flashing details, shimming, sealing, expansion rates, and code compliance for wind loads. A general contractor splits attention across trades. A window contractor does this every single day. That is how we can spot a rotted sill or a misaligned rough opening before it becomes a warranty claim on your time.
What a Written Price Actually Includes
Our quote includes the window units, all installation labor, interior trim work, exterior caulking, foam insulation around the frames, and haul-away of old windows. If a permit is needed for structural changes, that is listed as a separate line item, not buried. The total is the total. Sean Mackey signs off on every project price before it goes to the homeowner.
Window Installers
Window installers are the people on site who remove old windows, prep the openings, set the new units, and seal everything against air and water. Juniper Windows Orlando sends background-checked, uniformed window installers to every job in Orlando. We are a team you can recognize at the door. Our window installers replace standard units for $350 to $700 per window in vinyl, or $400 to $800 per double hung. The installers on your job are not day laborers pulled from a parking lot; they are trained, vetted, and accountable to the job number on your quote.
Day-of Professionalism You Can Expect
You get a live arrival time through the Relay Visibility Guarantee, so you know when the crew shows up. They wear uniforms, put down floor protection, and clean the work area at the end of each day. Before-and-after photos are standard practice on every install. You should never wonder what happened while you were at work.
Ongoing Accountability After the Install
If something fails within a year, the 365-Day Done Right Promise covers parts and labor. We come back and fix it, no charge. If a repair is needed and that repair has a problem, the second visit is free. That is how a window installer earns trust in Orlando, one job at a time.
Brands We Service
We install and service CGI windows, a Miami-based manufacturer known for impact-rated aluminum and vinyl lines that stand up to coastal storm codes. Their products are common in Orlando homes built after the 2004 hurricane season when code requirements tightened. We carry OEM parts and know their installation tolerances precisely, which means fewer callbacks and cleaner fits.
We also work extensively with CWS and ES Windows. CWS builds large-format impact windows that work well for picture window and sliding glass door applications. ES Windows is known for aluminum and vinyl lines that handle thermal expansion well in Florida’s heat cycles. Whether you have one of those brands, an ECO Window Systems unit, or any other make, we can install or service it.
Signs You Need a Pro Right Now
- Drafts you can feel from across the room. If you can feel air moving near a closed window, the weatherstripping or the seal is gone. In Orlando, that means your AC is leaking out the walls all summer.
- Visible daylight around the sash edges. Gaps that let light through also let rain and humidity through during storm season. A proper installation seals those gaps from the interior and exterior.
- Condensation or fog between glass panes. When a double-glazed unit fogs inside, the factory seal has failed. The inert gas has leaked out, and the window’s insulating ability has dropped significantly.
- Wood rot or soft sills around the frame. Rot is structural. A soft sill means water has been intruding for a while, and the rough opening behind it may be compromised. That needs a window installer, not caulk.
- Windows that stick, bind, or will not lock. Sticking is often a sign that the frame has shifted or the sash is out of square. A window that cannot lock is a security issue and an insurance liability.
Our Process, Step by Step
- 1
Free estimate and written quote. We come out, measure every opening, and assess the existing frames. You get a written price for the complete job before any work starts. The estimate is free, and the price does not change unless you change the scope.
- 2
Product selection and glass package. We review your goals: energy efficiency, storm protection, noise reduction, style. Then we spec the frame material, Low-E coating, argon fill, and impact rating that match your budget and code requirements.
- 3
Permit and code review. If structural changes require a permit, we pull it. Florida building code for wind load applies to most window replacements in Orlando, and we handle that paperwork rather than leaving it to you.
- 4
Installation day. You get a live arrival time. The crew removes old windows, inspects the rough opening, corrects any rot or alignment issues, sets the new unit, and seals everything with low-expansion foam and exterior flashing.
- 5
Final walkthrough and digital invoice. We take before-and-after photos, walk the job with you, and send a digital invoice you can pay from a link. The 365-Day Done Right Promise starts the day we finish, covering parts and labor for a full year.
How Much Does Window Installation Cost in Orlando?
A typical window installation in Orlando runs $350 to $700 per vinyl window, $400 to $800 per double hung, and $450 to $950 per casement. Picture windows range from $500 to $1,400, and bay window installation runs $2,500 to $6,000 per bay. These ranges reflect standard-sized openings, mid-grade to premium glass packages, and standard installation labor.
| Window Type | Typical Ran |
|---|---|
| Vinyl window | $350 – $700 per unit |
| Double hung | $400 – $800 per unit |
| Casement | $450 – $950 per unit |
| Picture window | $500 – $1,400 per unit |
| Bay window | $2,500 – $6,000 per bay |
What affects the price: glass package and impact rating, frame material, window size, structural condition of the rough opening, and whether a permit is needed. Impact-rated glass adds $25 to $45 per square foot in most cases. Rotted sills or framing repairs add labor and material. To avoid overpaying, get a written quote that itemizes materials, labor, disposal, and permits. A free estimate from Juniper Windows Orlando includes exact measurements, a line-item price, and a written breakdown you keep. Call (850) 679-8554 to schedule yours.
Our Service Area Near Orlando
Juniper Windows Orlando serves homeowners throughout Orange County and the surrounding areas. We install windows in Kissimmee, Altamonte Springs, Clermont, DeBary, Lake Mary, Doctor Phillips, Union Park, Orlovista, Ocoee, Casselberry, and Wekiwa Springs. Typical response times for estimates within 20 miles of downtown Orlando are one to two business days. Check our home page for more about the Relay Visibility Guarantee and the eight product lines we carry.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Installation in Orlando
Window installation is the process of removing old windows, preparing the openings, and setting new windows in place with proper sealing, insulation, and trim. It includes flashing work on the exterior to keep water out and foam insulation around the frame for air sealing. Done correctly, window installation should be invisible, nothing more than a window that opens and closes perfectly for decades.
Most single-window installations in Orlando take one to three hours per window, including removal and cleanup. A whole-home replacement of 10 to 15 windows typically runs one to two days. Bay window installations take one to two days alone because of the structural work involved. We give you a projected timeline in writing before the job starts.
Standard window installation in Orlando runs $350 to $700 per vinyl window, $400 to $800 for double hung, and $450 to $950 for casements. Impact-rated glass adds $25 to $45 per square foot. Bay windows run $2,500 to $6,000. Call (850) 679-8554 for an exact quote, the estimate is free and written.
We install and service CGI, CWS, ES Windows, ECO Window Systems, and other major lines carried through the Relay Home Co. family. If you have an existing PGT or CGI installation in Orlando that needs repair or replacement, we can match the glass package and spec a compatible unit. Bring us the window details and we will tell you exactly what fits.
For storm damage, break-ins, or any situation where a window opening is exposed, we prioritize emergency board-up and replacement. A live person answers the phone 24/7 at (850) 679-8554. We will assess the opening and get a replacement scheduled as quickly as product availability allows, with a written price before any work starts.
Every project carries the 365-Day Done Right Promise, covering parts and labor for a full year after installation. If work is not right, we make it right, in writing, on every project. Manufacturer warranties on glass and frames run separately and typically cover 10 to 20 years depending on the product line. We register those warranties for you at installation.
Clear the area around each window, inside and out, about three feet back. Move furniture, wall art, and any breakable items away from the work area. Keep pets and kids out of the install zones during work hours. Our installers handle floor protection and cleanup, but removing personal items beforehand makes the day move faster.
Schedule Your Window Installation Service in Orlando Today
If your windows are drafty, hard to lock, or just past their prime, get a real number from a window installer who puts it in writing. Call (850) 679-8554 to schedule your free estimate with Juniper Windows Orlando. A live person answers any time, day or night. The quote is free, the price is written, and the 365-Day Done Right Promise backs every install.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.