PGT Window Replacement Nationwide

PGT Window Replacement: The Orlando Owner’s Guide

PGT window replacement in Orlando typically runs $450 to $1,100 per window installed, depending on the series, glass package, and whether the existing frame can be reused. We stock PGT-compatible sashes, balances, weatherstripping, and hardware on our trucks, so most single-unit replacements are done in one visit. Homeowners usually discover a failing PGT window one of three ways: a sash that won’t stay up, condensation fogging between the glass panes, or a lock that no longer engages cleanly. All three point to a specific component giving out, not the whole unit. The good news is that PGT builds windows in modular pieces, which means we can often replace the failed part instead of tearing out the entire frame. That saves real money and keeps the original impact rating intact.

Call (850) 679-8554

Which PGT Models This Applies To

PGT’s Orlando footprint covers a handful of series you’ve probably got on your house right now: WinGuard, SpectraGuard, Eze-Breeze, and the older ClassicVue line. The compatibility gotcha most owners miss is that PGT changed balance shoe and pivot bar dimensions between manufacturing years on the WinGuard series, so a 2015 balance won’t always drop into a 2019 sash, even when the window looks identical. The fastest way to identify your exact part is to check the corner of the glass for the PGT etched logo and a small series code, usually two or three letters followed by four digits. If the glass etch has worn off, measure the visible glass width and height to the nearest 1/8 inch and snap a photo of the balance shoe. We match the part to the series spec sheet, not a guess. On OEM versus aftermarket: for impact-rated sashes and laminated glass, we use PGT OEM parts every time. The aftermarket stuff doesn’t carry the same Miami-Dade NOA, and in Orlando’s wind zone, that rating is the whole reason you bought PGT in the first place. For non-structural parts like weatherstripping and sash locks, quality aftermarket equivalents can save 30 to 40 percent with no performance difference, and we’re upfront about which is which.

Juniper Windows Orlando is an independent service provider and not affiliated with PGT Industries. We stock PGT parts because our customers have PGT windows, plain and simple. We also carry parts for CGI, CWS, and ES Windows units when a mixed-install home needs cross-brand work.

Signs Your PGT Window Replacement Is Failing

• Sash drops or won’t stay open. The balance system, either a block-and-tackle or spiral balance depending on the series, has lost tension or the shoe has cracked. On WinGuard single-hungs, this is the most common failure we see within 8 to 12 years in Orlando’s heat, because the plastic shoe components get brittle from attic-to-wall temperature swings.
• Fog or condensation between the panes. That’s a failed insulated glass unit seal. Orlando’s humidity means once the desiccant inside the spacer bar saturates, you’ll see haze that never wipes off. The glass unit gets replaced, not cleaned.
• Lock or keeper won’t engage. Over time, the sash settles or the keeper plate shifts, and the lock tongue misses the slot entirely. Sometimes it’s just realignment; sometimes the lock body itself is stripped.
• Noticeable draft or water staining at the sill. Weatherstripping compresses and loses its memory in Florida sun exposure, especially on west-facing walls. Water staining at the interior sill usually means the weep system is clogged or the outer weatherstrip has failed.
• Crank or handle turns without moving the sash. On casement and awning PGT units, the operator gear strips internally. This is a one-for-one operator replacement, no glass work needed.

Replacement Cost & What’s Included

Here’s what Orlando homeowners can expect to pay for common PGT window replacement work, installed:

• Sash balance replacement: $95 – $165 per sash
• Weatherstripping replacement (full perimeter): $120 – $240 per window
• Sash lock and keeper replacement: $85 – $145 per lock set
• Insulated glass unit replacement (non-impact, annealed): $300 – $550 per pane
• Insulated glass unit replacement (impact-rated, laminated): $550 – $900 per pane
• Full window unit replacement (impact-rated, installed): $650 – $1,100 per window

Those numbers include the part, labor, and haul-away of the failed component. The range depends on glass size, series, and whether we’re replacing a component or the full unit. Every quote is a written line-item price before we start, no change orders, no “found something in the wall” add-on. The work carries our 365-Day Done Right Promise: parts and labor, in writing, for a full year. If a repair fails within that year, the second visit is free.

DIY or Call Us?

Here’s the honest split. You can safely clean and clear the weep holes at the bottom of the sash with a small brush or compressed air; that fixes a lot of sill-water issues without touching hardware. You can also visually confirm a failed seal by looking for haze or mineral streaking inside the glass. But once you’re into balances, sash springs, or IGUs, replace the impulse to YouTube it. PGT balance systems hold tension against a 15 to 40 pound sash, and the wrong release sequence can send the block-and-tackle carrier into your hand. Laminated impact glass is heavier than standard annealed, and a dropped sash sends an ER-level pinch force into fingers and frames. Beyond safety, mismatched parts void the Miami-Dade rating you paid for. If the part number doesn’t match the series spec, the assembly isn’t certified anymore. That’s not a risk worth taking to save $150.

Call us at (850) 679-8554. Sean Mackey will tell you straight whether it’s a thirty-minute part swap or a full unit replacement, and the number we quote is the number you pay.

FAQs