New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Windows & Doors in Orlando, FL | Juniper Windows Orlando
We’re Juniper Windows Orlando, an independent CWS service provider working across Orlando, and we repair and maintain CWS windows and doors without being tied to the manufacturer. That independence means we quote straight: if a roller set fixes your sliding glass door, we won’t sell you a full replacement. Call (850) 679-8554 for a written price before any work starts. The thing that sets our CWS work apart in Orlando is knowing exactly how this city’s humidity and afternoon storms chew through specific CWS parts, and which repairs are actually worth doing on pre-2002 homes versus post-code builds.
For years, our crew has been swapping leaky single-panes for impact-rated units and rebuilding CWS tracks in neighborhoods from College Park to Lake Nona. CWS sales & service pages elsewhere might show you a product brochure. We show up, look at your frame, and tell you what’s actually wrong.
Why Orlando Residents Choose Us for CWS Service
Sean Mackey, our owner, picked up the trade at Los Angeles Trade-Technical College and has spent well over two decades focused on windows and doors specifically. Not siding, not roofing. That focus matters when a CWS 3000 Series single hung has a bad coil balance and someone has to know whether it’s worth rebuilding or replacing. Sean can walk you through U-factor ratings and frame sightlines without making your eyes glaze over.
We’re also local to Orlando service area work, which means we’re not driving in from Tampa or Daytona guessing at your neighborhood’s housing stock. We know Conway’s 1980s sliders, Pine Hills’ concrete block singles, and Baldwin Park’s post-2004 stucco builds. Every job gets a written price before a screw turns, backed by the 365-Day Done Right Promise. If it’s not right, we make it right, parts and labor, in writing, for a full year.
Every Juniper location is independently owned and operated under The Relay Visibility Guarantee. You book, you get a live arrival time, photo updates, and a digital invoice you can pay from a link. No four-hour windows. No mystery pricing.
Common CWS Windows & Doors Problems We Solve in Orlando
- CWS 3000 Series single hung sashes that drop or stick. Orlando’s humidity corrodes the aluminum coil spring balances on 1980s-era CWS 3000 units faster than anything we see in drier parts of the state. The sash gets heavy, then drops when you try to prop it open. We replace the balance, clean the track, and the window works again without a full replacement.
- CWS 7000 Series sliding glass doors that drag or won’t seal. In Conway and Pine Hills, decades of afternoon thunderstorms and wind-driven rain pit the aluminum tracks on CWS 7000 sliders. Rollers seize, the door drags, and the top corner starts showing daylight. We install sealed-bearing aftermarket rollers that outlast the originals in salt-humid air.
- Cloudy, hazy glass on CWS 4000 Series double hungs. Post-2004 Baldwin Park homes are full of these, and Orlando’s intense UV exposure degrades the low-e coating early. You see spotted or purple-hazed glass. The fix is an insulated glass unit replacement, not a full window swap.
- Window frame sealant breakdown and interior mildew. CWS frames across Orlando hold moisture longer than they would in a dry climate. Sealant fails, humid air gets into the frame, the insulated glass fogs, and mildew starts on interior sills. Replacing the IGU and resealing properly stops it.
- Storm-damaged sashes that slam shut after high winds. A hard afternoon storm can knock a worn CWS balance out of alignment. When the sash starts dropping hard, stop using it and call us. The springs are under tension and a dropped sash is a finger-breaker or worse.
CWS Service in Orlando: What Local Conditions Mean for Your Equipment
Orlando’s building code split in 2002 created two completely different CWS service calls within a 15-minute drive. A CWS window installed in a pre-code Pine Hills home almost never meets current wind-load requirements without added impact glazing or a shutter retrofit. Those units were built for a different standard, and no amount of balance replacement changes that. Meanwhile, a post-code Baldwin Park CWS unit may fail from UV-crazed low-e coating before it ever needs structural work. The glass hazes, the energy numbers fall off, and the frame itself is still fine. That’s not a structural fix, that’s an IGU swap. Knowing which Orlando house you’re standing in before we quote is the difference between a $250 roller job and a $4000 replacement you didn’t actually need.
Our crew pulled a CWS 7000 Series sliding patio door from a Conway ranch where the aluminum track was so pitted from years of afternoon thunderstorms that the door wouldn’t seal, letting in wind-driven rain and ants. We cleaned the corroded section, installed an aftermarket heavy-duty roller set with sealed stainless bearings, and replaced the weatherstripping. No frame replacement needed. The door glides with one hand now, and the customer’s energy bill dropped the next month.
CWS Models & Products We Service in Orlando
We work on the CWS 3000 Series Single Hung, CWS 4000 Series Double Hung, CWS 5000 Series Horizontal Roller, and CWS 7000 Series Sliding Glass Door. When a frame is still under warranty or you want factory specs, we use OEM CWS parts. But for older coils, rollers, and weatherstripping, we install high-quality aftermarket components that match or exceed original tolerances, especially in Orlando’s humidity and salt air. If the frame is pitted, bowed, or seal-welded beyond repair, we’ll tell you straight that our Window Replacement in Orlando beats a patch. We also handle hurricane impact window retrofits, sliding glass door roller and track replacement, and window maintenance and care across Orlando.
CWS Service Pricing in Orlando
Most CWS service calls in Orlando fall between $180 and $340 for common repairs like balance replacement, roller swaps, and weatherstripping. Sliding glass door track work usually runs $190 to $250 per panel. Full insulated glass unit replacement on a CWS 4000 Series double hung starts around $310 per sash, depending on glass size and low-e spec. A full impact-rated window replacement runs higher, typically $900 to $1,600 per opening installed, and that’s where a written line-item quote matters. The main drivers are parts choice (OEM vs aftermarket), frame condition, and whether we’re doing a retrofit or full tear-out. Call (850) 679-8554 and we’ll give you a ballpark before we even schedule the visit, and a written price before any work begins.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Orlando
That daylight gap is almost always failed rollers or a pitted track. Orlando’s afternoon thunderstorms drive rain horizontally against sliding doors, and over years that water corrodes the aluminum track and seizes the rollers. The door sags, the top corner gaps open, and the weatherstripping can’t seal. We replace the rollers with sealed-bearing units and clean or section-replace the track. Call (850) 679-8554 for an exact quote – estimates are free.
If the frame is square and the glass is clear, a $150 to $250 balance replacement usually buys you years more service. If the frame is corroded at the sill, the low-e coating is failing, or the window is original to a pre-2002 Orlando home, replacement starts making more sense, especially if you’re thinking about hurricane protection anyway. We’ll show you both numbers and let you decide.
In most cases, adding impact rating means full replacement of the window or door unit, not a retrofit of existing frames. Pre-2002 Orlando frames especially were never engineered for the wind-load requirements that impact-rated openings demand. We can quote our Window Installation in Orlando with impact-rated glass built to resist wind-borne debris without shattering, and we’ll handle the permit on our end. Call (850) 679-8554 for a written quote.
That’s premature low-e coating failure from intense UV exposure. Orlando’s sun breaks down the metallic coating inside the insulated glass unit faster than you’d see in a northern climate. The fix is an IGU replacement, not a full window swap. We remove the sash, install a new sealed glass unit, and reseal the frame.
Stop using the window and keep your hands off the track. That’s a failed or partially released coil balance under tension. A slamming sash can break fingers. Call us. We’ll release the tension safely, inspect the balance, and replace it same visit. Reach us at (850) 679-8554.
Service Areas Near Orlando
We run CWS service across Orlando proper and into the surrounding metro. If you’re in CWS service in Kissimmee, we’re there regularly for slider repairs on older frame homes. We also cover CWS service in Altamonte Springs, plus Clermont, DeBary, Lake Mary, and the neighborhoods in between.
Book Your CWS Service in Orlando Today
If your CWS window or door is acting up, call (850) 679-8554. We’ll get a technician out with a live arrival time, a written quote, and the parts to fix most jobs on the spot. Sean’s rule holds: If I wouldn’t put it on my own house, I’m not putting it on yours.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.