New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Orlando Owner’s Guide
We stock and install CWS door parts and full door units across Orlando, with most installed replacements running between $185 and $650 depending on the part, the door series, and what failed. A CWS door that won’t latch, drags against the frame, or whistles during afternoon storms usually needs a hinge kit, roller assembly, or threshold rebuild – and we carry those parts on our trucks for most CWS residential lines. You don’t need to replace the whole door because a hinge pin wore out. Call (850) 679-8554 and we’ll match the part to your model and give you a written price before anything gets touched.
The way most Orlando homeowners discover a CWS door problem is gradual: the door gets harder to close in July, the latch stops lining up, or water starts pooling at the bottom corner after a heavy downpour. By the time it’s obvious, the secondary damage – a warped threshold, a scored door edge – has already started.
Which CWS Models This Applies To
CWS built several residential door lines, and the parts are not universally interchangeable. The CWS 8000 series and CWS 9000 series use different hinge geometry and different bottom sweep profiles. Before you order anything, check the hinge edge of your door panel for the etched or sticker-label code. If the label is gone (UV and humidity eat them fast in Florida), measure the door thickness and the hinge-to-hinge spacing – that’s how we identify what you’ve got without guessing.
For most CWS models, we recommend OEM or OEM-equivalent parts rather than generic box-store hardware. The tolerances on CWS hinge pins and roller assemblies are tighter than generic replacements, and a generic hinge kit will leave the door sagging again within a season. We’re an independent Orlando service provider, not affiliated with CWS, so we can also tell you honestly when a quality aftermarket part makes more sense than paying OEM markup.
Signs Your CWS Door Installation Is Failing
- Door drags or scrapes at the lock edge. This usually means a hinge has worn or pulled from the jamb – common in Orlando because humidity cycles swell and shrink the frame, loosening screw anchors over time.
- Latch won’t align or keeps missing the strike plate. A sagging panel is the culprit, but if you keep filing the strike plate you’ll only chew up the edge and eventually split the door slab.
- Water staining or swelling at the bottom corner. The bottom sweep or threshold cap has failed. CWS thresholds use a snap-in cap that cracks after years of direct sun on south-facing doors.
- Door won’t stay open or slams shut on its own. If it’s an in-swing exterior, the closer or the hinge tension is done. If it’s a sliding CWS unit, the roller cartridges have flattened.
- Whistling or daylight visible around the frame. The weatherstrip has compressed or torn. In Orlando, that’s also your air-conditioned air leaving the house, not just rain getting in.
Replacement Cost & What’s Included
For CWS door installation in Orlando, expect these installed ranges:
- Hinge kit replacement (2-3 hinges, installed): $185 – $285
- Bottom sweep and threshold cap: $145 – $225
- Roller assembly replacement (sliding CWS units): $220 – $380
- Complete weatherstrip set around the frame: $180 – $310
- Full CWS door slab installation (with existing frame in good shape): $480 – $650
Every quote includes the part, the labor, disposal of the old part, and a written price before we start. What’s not included: surprise upcharges. The final figure matches what Sean Mackey quotes at the door, covered by our 365-Day Done Right Promise – parts and labor, in writing, for a full year after the work.
DIY or Call Us?
If the issue is a loose hinge screw, you can tighten it yourself – but if the screw just spins, drilling it out and filling with a proper threaded anchor is easy to get wrong in a CWS jamb. That’s one situation where a $40 DIY attempt ends as a $350 jamb rebuild. For anything involving the door panel itself – pulling a slab off, replacing rollers on a heavy sliding unit, or resetting a threshold – it’s worth having a pro handle it. A CWS sliding door panel can weigh over 150 pounds, and dropping one onto a foot is not a DIY lesson anyone wants to learn.
If you’re in Orlando and want someone to look at it before you touch anything, call (850) 679-8554. We’ll tell you over the phone whether it sounds like a quick fix or a full part swap, and then we’ll give you a written price either way.
FAQs
Most CWS hinges, sweeps, and rollers last 8 to 12 years in Central Florida, but doors with direct afternoon sun exposure often need threshold and sweep work closer to the 6-year mark. We also service PGT, CGI, and ES Windows door hardware, and similar wear patterns apply across all four brands in this climate.
Sometimes, yes. A bent hinge leaf can often be tapped back into alignment, and a compressed sweep sometimes just needs reseating. But most CWS parts at the failure point – cracked threshold caps, flattened rollers – are cheaper to replace than to patch, and we’ll tell you that straight before quoting anything.
Most CWS door part replacements take 45 to 90 minutes once we’re at the house. A full slab installation in the Orlando area is typically a half-day job, including re-hanging, weatherstrip, and final latch adjustment so the door closes without fighting you.
We stock common CWS hinge kits, bottom sweeps, threshold caps, and roller assemblies on our Orlando trucks. Less common series-specific parts are typically available for pickup the same or next business day, and we’ll confirm lead time before you commit to anything.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.