VLX 80 Casement Window

VLX 80 Casement Window in Orlando, FL | Juniper Windows Orlando

The VLX 80 casement window is a side-hinged aluminum window built around one idea: you should see more glass and less frame. In Orlando, where afternoon thunderstorms roll through and humidity never takes a day off, this window holds up without warping, sticking, or letting the outside in. Juniper Windows Orlando is an authorized installation partner for ViewLux, the manufacturer behind the VLX 80. That means you get the product with a warranty that stays intact because it was installed correctly. We serve homeowners across Orlando, from College Park to Lake Nona to Dr. Phillips. Call (850) 679-8554 to schedule a free on-site measurement.

Call (850) 679-8554

Product Overview – VLX 80 Casement Window

The VLX 80 exists for people who want a window that performs like a commercial storefront but lives comfortably in a residential home. Its design language is minimal. The profile width measures just 1.97 inches, which means the frame nearly disappears, leaving a wide opening of glass. The casement style hinges on the side and cranks outward, so the full window opening is available for airflow. That is maximum ventilation, not the partial kind you get from a sliding window where one panel always blocks the other.

Architecturally, the VLX 80 fits modern Orlando builds in Baldwin Park and Winter Park’s newer developments just as naturally as it complements mid-century homes in Audubon Park. Because the sightlines are so narrow, the window works especially well in rooms where you want the view to dominate: a kitchen over the sink looking into a screened pool deck, a living room facing a lake, a bedroom with garden exposure. The aluminum is thick enough to resist dents and daily abuse, with a wall thickness of 0.079 inches that gives the frame real structural integrity. You are not getting a flimsy extrusion. You are getting a window that will still operate smoothly in fifteen years. When you buy through Juniper Windows Orlando, you are also buying an installation partner who has been trained on this exact product line, which matters more than most people realize.

Technical Specifications

Here is the VLX 80 at a glance. These are the numbers and options that define the window:

• Frame profile width: 1.97 inches – among the narrowest in its class, maximizing glass area
• Wall thickness: 0.079 inches – heavier-grade aluminum extrusion for torsional strength and long-term squareness
• Operation: Side-hinged casement with smooth crank mechanism
• Glass options: Clear, Frosted, Low-E, Tempered, Impact-Rated Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Thermal performance: Thermally broken frame, NFRC-rated for energy efficiency
• Installation standard: AAMA 2400/2410 compliant, AAMA 812 foam sealant on all perimeter joints
• Wind rating: Engineered and test-rated for Orlando-area wind load requirements

Every VLX 80 we quote in Orlando can be configured from these options without special ordering. Lead times typically run four to six weeks depending on glass and finish selection.

Performance Features

The VLX 80 is not a standard aluminum window. The thermal break changes everything about how it performs in central Florida’s climate. Here is what each performance area means for your home:

Thermal Efficiency

The frame carries a thermal break, which separates the interior and exterior aluminum to stop heat from transferring through the metal. In Orlando, where summer temperatures sit in the 90s for months, an NFRC-rated window like this reduces the load on your air conditioner. Low-E glass adds another layer by reflecting solar heat before it enters the room.

Acoustic Performance

Aluminum is dense, and dense frames dampen sound better than vinyl. Pair the VLX 80 with laminated glass and you get meaningful noise reduction. Homes near SR 408, I-4, or Orlando International Airport flight paths benefit most. The difference is noticeable: traffic fades to a low hum rather than a constant presence.

Airtightness & Weather Seal

The casement design presses the sash against the frame when closed, compressing the weatherstripping along all four sides. That compression seal is why casement windows outperform sliders on airtightness tests. For Orlando homes, that means less humid infiltration, fewer drafts, and a lower chance of condensation forming inside the frame.

Waterproofing

Orlando gets afternoon downpours that drop an inch of rain in twenty minutes during summer. The VLX 80 is engineered with multi-point drainage channels inside the frame so any water that gets past the outer seal is routed out through weep holes at the sill. Combined with proper installation using AAMA 812 low-expansion foam on every perimeter joint, the system keeps water where it belongs: outside.

Wind Resistance

Florida building codes demand windows that withstand hurricane-force gusts, and the VLX 80 is wind-load rated to meet those requirements in the Orlando market. The 0.079-inch wall thickness gives the frame the backbone it needs. For homes in areas with stronger exposure, the impact-resistant laminated glass option adds storm protection that meets Florida’s high-velocity hurricane zone standards.

Security & Hardware

The crank mechanism on a casement window creates a mechanical advantage that locks the sash firmly in place. Unlike a sliding window that can be lifted or forced, a closed casement is compressed against the frame. The VLX 80 uses multi-point locking hardware that engages at multiple points along the frame, making forced entry genuinely difficult.

Color & Glass Options

The VLX 80 comes in six finishes, and each one changes the personality of the window. Premium Black is the current favorite for modern Orlando homes, especially new construction in Lake Nona and Winter Garden where black window frames are practically standard. Pure White reads as clean and classic, which suits the traditional Florida homes in areas like Delaney Park or Thornton Park. Anodized Silver is understated and quietly modern. Bronze and Champagne bring warmth without the maintenance worries of wood, and Teak Wood is the choice for people who want a wood look with aluminum durability. It holds up in Orlando’s humidity without the rot, peeling, or termite concerns that real wood invites.

On glass: Clear is the budget baseline. Frosted works well in bathrooms or anywhere privacy matters. Low-E is our default recommendation for Orlando because it cuts solar heat gain year-round. Tempered glass is safety-rated and required in certain locations by code, like windows near doors or low to the floor. Laminated is the upgrade for impact resistance and sound control. Many Orlando homeowners combine Low-E with laminated for the best of both: energy performance and storm-rated glass in one unit.

Installation by Juniper Windows Orlando in Orlando

We install every VLX 80 we sell because the installation is where windows live or die. A $900 window installed incorrectly leaks, sticks, and voids the manufacturer warranty. A $900 window installed correctly performs for decades. That is the reality, and it is why Juniper Windows Orlando does not subcontract our installation work. Our crews handle every step directly.

The process starts with a pre-installation inspection at your Orlando home. We measure the existing opening, check the rough framing for rot or water damage, and verify the surrounding wall structure is sound. If there is hidden damage, we address it before the new window goes in. Then we set the VLX 80 into the opening and dial it in: level, plumb, and square. An aluminum window that is even slightly out of square will bind, leak, or both. We take the time to get the frame exact. Shimming is done deliberately, never rushed.

Once the window is set, we seal the perimeter with AAMA 812 low-expansion foam on every joint. This step is critical in Orlando because our climate exposes windows to daily thermal expansion and contraction plus intense summer rain. The AAMA 812 foam provides an airtight, water-resistant seal that moves with the building. We also install per AAMA 2400/2410, which means the flashing and integration details follow the industry’s recognized best-practice standard. After installation, we run a final water test on the exterior, check the operation of the sash and crank, and clean the job site. You should not know we were there except for the new window in the wall.

One note on Orlando building codes: if your home is in a wind-borne debris region, which includes much of central Florida, certain windows must be impact-rated or protected. We will tell you honestly if your project requires it. No guessing, no shortcuts.

Frequently Asked Questions – VLX 80 Casement Window

Get a Quote – VLX 80 Casement Window in Orlando

If you are considering the VLX 80 for your Orlando home, the next step is simple. Call Juniper Windows Orlando at (850) 679-8554 and we will schedule a free on-site measurement. We will walk your home, take exact sizes, discuss glass and finish options, and give you a written quote. No pressure, no guessing. Just a real number for a window that will serve your home for decades.

Written by the team at Juniper Windows Orlando, serving Orlando, FL and surrounding communities as an authorized ViewLux installation partner.