New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Sliding & Patio Doors: The Orlando Owner’s Guide
We stock and install ECO Window Systems-compatible sliding and patio door parts across Orlando, with most roller, track, and handle replacements running $180 to $520 installed and done the same day. Most owners discover a problem when the door suddenly takes two hands to slide, or when a lock stops catching cleanly against the jamb. In Orlando’s humidity and heat, what usually fails first is the roller assembly: the nylon wheels inside the bottom track flatten over time, the bearings seize from dust and corrosion, and the door starts grinding instead of gliding.
If your ECO door is sticking, sagging, or letting rain blow past the weatherstripping, the fix is usually a specific part, not a whole new door. That’s the page you’re on.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures several sliding door lines that show up regularly in Central Florida homes, and the part you need depends on which series you have. The most common we see in Orlando are the ECO 7000 and ECO 8000 sliding glass doors, along with the ECO 3000 series on older builds. Each series uses different roller housing dimensions and track profiles, and a roller from a 3000 series will not seat correctly in an 8000 track, even if it looks close at a glance. We’ve had owners hand us a roller they bought online that was off by two millimeters, and two millimeters is enough to make the door bind on every open.
To identify your part, look for a white or silver label on the top edge of the door panel itself, not the frame. The label will show a four-digit model code starting with a 3, 7, or 8. If the label is worn off or painted over, measure the roller housing width in millimeters, or send us a photo and we will match it from our truck stock. Juniper Windows Orlando is an independent service provider, not affiliated with ECO Window Systems, and we stock genuine ECO rollers, handles, and weatherstripping, plus quality aftermarket equivalents that often outlast the original in Florida’s salt air and humidity. The decision is yours and we quote both.
Signs Your ECO Window Systems Sliding & Patio Door Is Failing
- The door takes two hands to open or close. This is almost always a flattened roller assembly. Once the nylon wheels lose their round shape, the door rides on the roller housing instead of the wheel, and every slide scrapes metal against the track.
- You hear a grinding or rumbling sound when the door moves. That’s the bearing inside the roller seizing up. In Orlando, fine sand and humidity work into the roller housing and turn bearing grease into paste within a few years.
- The door sags visibly on the handle side and drags on the track. The bottom rollers have dropped out of adjustment, or the housing has cracked entirely. The weight of the glass panel is now sitting on the track itself.
- The lock won’t throw cleanly, or the handle feels loose and floppy. The latch has slipped out of alignment from the sagging panel, and the handle mechanism inside the stile has worn where the gear teeth engage.
- You see daylight or feel air moving along the top or side edges when the door is closed. The weatherstripping has compressed permanently, which is common after three to five Orlando summers, and the panel is no longer sealing against the frame.
Replacement Cost & What’s Included
Here’s what we charge in the Orlando market for the ECO-specific parts we handle most.
| Part or Service | Installed Price Range |
|---|---|
| Roller assembly (per panel, both sides) | $180 – $290 |
| Handle set with lock (interior and exterior) | $140 – $240 |
| Weatherstripping replacement (full perimeter) | $120 – $220 |
| Track cleaning and realignment | $90 – $160 |
| Full panel re-roller plus track replacement | $420 – $520 |
The range comes down to which series you have, whether the track itself is pitted beyond saving, and whether the panel needs to be lifted and rehung or can be serviced in place. Every quote is written before any work starts, parts and labor, and it stays the same at the invoice. The work is covered by the 365-Day Done Right Promise: if the door doesn’t slide right a year later, we fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Vacuum the bottom track with a narrow attachment and see if the door moves better. If it does, it was debris, not a roller. If it doesn’t, do not try to lift the sliding panel out of the track yourself. A glass patio door panel weighs 120 to 180 pounds, and when the bottom lifts clear of the track, it can drop fast and hard. We have had Orlando homeowners lose control of a panel and shatter it in the frame, and that’s a far bigger bill than a roller replacement.
What we do if you call us: confirm the series from the label, bring the right rollers on the truck, lift the panel with a two-person lift and suction cups, swap the hardware, adjust the height, and walk the door with you before we leave. Call (850) 679-8554 for a free estimate.
FAQs
In Orlando’s climate, expect four to seven years from original ECO rollers before the nylon flattens and the bearings start grinding. Doors facing a pool or lake, or doors on a west-facing wall in direct afternoon sun, tend to fail on the shorter end of that range. Call (850) 679-8554 and we’ll give you an exact replacement quote for your panel.
No, a flattened nylon wheel or a seized bearing cannot be repaired, only replaced. The good news is that replacement rollers are inexpensive compared to the labor of pulling the panel, and the job takes about an hour in most cases. Call (850) 679-8554 and we’ll confirm the roller size before we come out.
Most roller replacements take under an hour, and a full weatherstripping re-seal on an ECO sliding door runs about the same. We arrive with the parts matched to your series, do the work, clean the track, and test the door with you before the invoice is sent.
We keep the most common ECO 7000 and 8000 series rollers, handles, and weatherstripping on hand for Orlando service calls, along with parts for PGT, CGI, and CWS doors. If your series needs a special-order piece, we tell you the lead time before we schedule. Call (850) 679-8554 for a free estimate and we’ll match the part to your label.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.