New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Door Installation: The Orlando Owner’s Guide
ES Windows door installation in Orlando typically runs $450 to $1,100 installed, depending on the door series, hardware set, and whether the frame needs realignment or replacement. We stock ES Windows-compatible door hardware, rollers, hinges, and weatherseal components on our trucks, and we can usually complete a standard door swap or hardware rebuild in a single visit. Most Orlando homeowners discover they need door installation when a slider starts grinding, a French door stops latching, or a threshold lets the afternoon rain in. The good news is that many ES Windows door failures are repairable without replacing the entire panel, which keeps the bill down and the original sightlines intact.
Which ES Windows Models This Applies To
ES Windows manufactures several impact-rated door lines that show up regularly in Orlando homes, including the ES-8500 series sliding doors, ES-7700 hinged French doors, and the ES-9000 multi-slide units found in higher-end builds. The compatibility gotcha we run into constantly is this: ES Windows changed their roller assembly design between the ES-8500 generations, and the older single-wheel roller will not seat properly in a newer track profile. Before ordering anything, we always pull the door panel and check the roller housing dimensions against the track width, because guessing here means a door that binds or falls out of plumb within weeks. For most ES Windows hardware, we recommend OEM parts for locking mechanisms and impact-rated glass panels, but quality aftermarket rollers and weatherstripping can perform just as well at 30 to 40 percent less. Identifying your series is straightforward: look for a silver sticker on the door edge or top rail with a number beginning in ES, or check the original permit documents if you have them.
Signs Your ES Windows Door Installation Is Failing
- The door drags or grinds when you slide it. Rollers wear flat spots over time, especially in Orlando where fine sand and humidity work their way into the track. Once a roller stops spinning, the steel wheel starts scraping the aluminum track instead of rolling on it.
- The door won’t stay latched, or the deadbolt misses the strike plate. This is almost always a frame alignment issue. ES Windows doors are heavy, and when the header settles or the slab shifts, the panel drops enough to misalign the hardware.
- Water pools on the interior floor after heavy rain. The threshold weep holes clog with debris, or the weatherseal has compressed and hardened. In Orlando’s summer downpours, a failed threshold gasket can put water in your living room inside of ten minutes.
- You feel a draft or see daylight around the door edges. The compression weatherstripping ES Windows uses degrades under constant UV exposure. Once it loses its memory, it won’t spring back against the panel, and your air conditioning follows it right out the gap.
- The panel is hard to lift out of the track for cleaning. Adjustable roller screws seize up over time in humid air. A door that won’t lift means the rollers are seized in the down position and the entire panel is riding too low.
Replacement Cost & What’s Included
Here’s the straight pricing for ES Windows door installation work in the Orlando market. These are loaded numbers, meaning parts, labor, disposal, and the 365-Day Done Right Promise are all in.
- Roller replacement (sliding door, both panels): $180 to $320, depending on whether we’re using OEM or quality aftermarket rollers.
- Weatherseal and threshold gasket replacement: $140 to $260, including cleaning the weep channels and testing with a hose.
- Hardware set replacement (handles, locks, strike plates): $220 to $450, with OEM locking hardware at the higher end.
- Frame realignment and tune-up: $300 to $500, which includes pulling the panels, adjusting all rollers, replacing worn screws, and re-setting the door plumb.
- Full door panel swap (same frame, new ES Windows panel): $800 to $1,100, depending on panel size and glass spec.
What drives the range is parts availability and whether the track itself needs to be replaced. We write every quote before we touch the door, so the number you approve is the number you pay, parts and labor included, in writing.
DIY or Call Us?
Here’s the honest split. Pulling a heavy ES Windows sliding panel out of its track is a two-person job, and the panel can weigh 150 to 200 pounds depending on glass type. If you get it halfway out and lose control, you’ve got a shattered impact panel and a hospital trip. What a homeowner can safely do is clean the track with a shop vac, check for obvious obstructions, and spray a little silicone on the track surface. Beyond that, the risks stack up fast. Setting a door back plumb means adjusting the roller height screws while the panel is under load, and if you get it wrong, the door binds, the lock won’t catch, and you’re calling us anyway. If the door is dragging, leaking, or not latching, call (850) 679-8554 and Sean or a member of the crew will walk you through what we’re seeing.
FAQs
ES Windows door rollers typically last 8 to 12 years in Orlando’s climate, but we’ve replaced seized rollers on doors that were only five or six years old. The combination of humidity, fine grit, and daily use in a high-traffic slider shortens that lifespan compared to what ES Windows might estimate for a less punishing environment. A door that gets used 20 times a day will always eat rollers faster than a door that gets opened twice a week. If you’re hearing grinding, don’t wait – a seized roller will groove the track and turn a $200 job into a $500 frame repair. Call (850) 679-8554 and we’ll tell you if it’s a simple swap or something deeper.
Yes, in most cases we can repair rather than replace. Rollers, weatherseal, hardware, and frame alignment issues are all repairable, and that’s what we do on probably 80 percent of our ES Windows door calls. The entire door panel usually only needs replacing when the frame is bent, the glass is compromised, or the track is too far gone to save. If you’re not sure which bucket your door falls into, call (850) 679-8554 and we’ll give you a straight answer.
A standard roller replacement or hardware swap takes 1 to 2 hours. A full frame realignment or complete door panel replacement is more like half a day. We show up with what we expect to need on the truck, and we don’t leave until the door slides, locks, and seals the way it should. If you want a timeline for your specific door, call (850) 679-8554 and tell us what you’re seeing – we’ll tell you what to expect.
We stock rollers, weatherseal, handles, and locking hardware for the most common ES Windows door series on our trucks, plus quality aftermarket equivalents where they make sense. The parts we carry cover the majority of Orlando homes we service. If you have an ES-9000 multi-slide or a less common panel size, we may need to order specific components, and we’ll tell you that before we schedule. We also keep parts on hand for PGT, CGI, and CWS doors, so if you’ve got a mixed-house situation, we’ve usually got what you need. Call (850) 679-8554 with your series number and we’ll check the truck.
If your ES Windows door is grinding, leaking, or won’t latch, we’ll diagnose it fast, price it in writing, and stand behind the work for a full year. Call us at (850) 679-8554 to schedule your free estimate. If I wouldn’t put it on my own house, I’m not putting it on yours.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.