New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Door Replacement in Orlando: What to Know First
We replace ES Windows doors throughout Orlando as an independent ES Windows service provider, typically turning most replacements around in one to three days once parts are in hand. A straightforward slab swap on an ES Windows hinged door in Orlando generally runs $850 to $1,600 installed, while full frame-out replacements with impact-rated glass land between $2,200 and $4,800 depending on size, swing, and hardware. If you own an ES Windows door that’s dragging, sagging, or letting in Orlando humidity, call (850) 679-8554 for a straight answer and a written price before anything gets ordered.
This page is for Orlando homeowners who already have ES Windows doors, noticed they’re failing, and want to know what it’ll take to fix them properly. Sean Mackey and our crew have pulled apart enough ES Windows units across College Park, Conway, and Lake Nona to know exactly where they fail and what’s worth saving.
How ES Windows Products Fail – and How We Fix Them
ES Windows builds a solid product, but Orlando’s heat, humidity, and afternoon thunderstorms expose weak points in any door over time. Here’s what we see most often on ES Windows door replacements in Orlando:
- Roller wear on the ES Windows 7000 Series sliding doors. The 7000 Series uses a roller carriage that collects grit and chalky aluminum oxide from frame wear. The door gets stiff, then starts chattering. We replace the rollers with sealed stainless bearings and re-shim the track, which usually restores a two-finger glide.
- Warped slabs on ES Windows 8500 Series French doors. Orlando’s summer humidity works on the wood-veneer 8500 slabs. Owners call us when the active door won’t latch because the slab has bowed a quarter inch. We either plane and re-seal the slab or replace it if the warp has twisted the frame. On replacements, we recommend a composite-core slab that handles humidity swings better.
- Fogged glass on ES Windows impact-rated doors. Condensation between the panes means the sealed unit has failed. Once moisture is inside, the door’s U-factor drops and the view goes hazy. We swap in a new sealed unit matched to the original impact rating – no jerry-rigged single-pane fixes that would fail inspection.
- Threshold rot on ground-level ES Windows swinging doors. Orlando’s afternoon downpours pool water against thresholds, and the aluminum threshold channel on older ES Windows doors corrodes where the sweep meets the sill. We replace the threshold and install a double-fin sweep so water sheds away from the slab.
- Latch misalignment on ES Windows 6000 Series doors. The 6000 Series multi-point latch is fussy. When the house settles, the strike plate drops a few millimeters and the door won’t lock. We’ll either re-mortise the strike or install an adjustable strike plate, and we test the lock from both sides before we call the job done.
Our ES Windows Door Replacement Process
Every ES Windows door job in Orlando follows the same path, from first call to final walk-around:
- 1
Call and evaluation. You call (850) 679-8554, a live person answers, and we ask the right questions: door type, series number if you can find it, symptoms, and whether you want a repair or a full replacement. Then we book a site visit.
- 2
On-site diagnostics. Sean or one of our background-checked techs shows up at the scheduled time, inspects the door, measures the rough opening, and checks the frame, threshold, and surrounding trim. We give you the price in writing before we leave the driveway.
- 3
Parts decision. We discuss OEM versus quality aftermarket. For ES Windows doors under warranty, we recommend OEM to preserve coverage. For out-of-warranty doors, a quality aftermarket part often costs 30 to 40 percent less and carries the same service life.
- 4
Installation and cleanup. We do the swap in one day for most replacements, haul away the old door, and leave the job site cleaner than we found it.
- 5
Testing and walkthrough. We cycle the door, check the weatherstripping, test the lock, and walk you through the finished work. Every job gets before-and-after photos and a digital invoice you can pay from a link.
- 6
The 365-Day Done Right Promise. If anything’s off within a year, we come back and make it right. Parts and labor, in writing.
What ES Windows Door Replacement Costs in Orlando
Here are the real numbers for ES Windows door work in Orlando, based on what we’ve quoted across the city in the last year:
- Slab replacement (pre-hung ES Windows hinged door, standard size): $850 to $1,600
- Full frame-out replacement with impact-rated glass: $2,200 to $4,800
- Sliding door roller and track rebuild: $280 to $650
- Threshold replacement with weatherproofing: $300 to $700
- Sealed glass unit replacement (impact-rated): $450 to $1,200 per panel
What moves the price: door size, swing direction, glass rating, frame condition, and whether we’re matching existing hardware or installing new. The number Sean gives you in the driveway is the number on the invoice. No change orders, no surprises. Call (850) 679-8554 for your free written estimate.
Why Orlando Homeowners Call Juniper Windows Orlando for ES Windows Work
We’ve been doing windows and doors in Orlando since 2001, and ES Windows is one of the eight product lines our techs work on every week. That matters when a door fails. We know the difference between a 6000 Series latch problem and an 8500 Series warp, and we’ll tell you straight whether a door is worth saving or needs to go. Our techs are background-checked and uniformed. You get a live arrival time, photo updates, and a written price before any work starts. And if something isn’t right after we leave, the 365-Day Done Right Promise covers it for a full year. For jobs where ES Windows isn’t the best fit, we also work with PGT, CGI, CWS, and ECO Window Systems, so the right door is never a compromise.
Sean’s rule is simple: if he wouldn’t put it on his own house, he’s not putting it on yours. That’s how every ES Windows door replacement in Orlando gets done.
FAQs
Replacing the door itself doesn’t void a warranty, but using non-OEM parts on an in-warranty door can. If your ES Windows door is still covered, we recommend OEM components and we’ll confirm the warranty status with you before ordering anything.
We stock common ES Windows rollers, sweeps, and strike plates in our Orlando shop, but series-specific parts like 8500 Series slabs or custom sealed glass units typically need a 5 to 10 business day lead time from the supplier.
If the frame is square and the slab is sound, repair is usually the smarter spend. If the frame has rotted, the slab is warped, or the glass has failed on a door that’s already 15 years old, replacement usually makes more sense. Sean will walk you through the math at the site visit and give you a written price either way.
Most ES Windows door replacements in Orlando take one day on-site once parts arrive. Full frame-out jobs with stucco work or threshold reconstruction can run two days. We’ll give you a firm timeline with your written quote.
Yes, when Orlando or Orange County code requires it, we pull the permit and schedule the inspection. Impact-rated door replacements almost always require one, and we handle it from start to finish.
Get a Straight Price on ES Windows Door Replacement in Orlando
If your ES Windows door is failing, don’t wait until it’s jammed shut or leaking air during a Florida storm. Call Juniper Windows Orlando at (850) 679-8554 and talk to a real person. We’ll ask the right questions, set a visit time you can track, and hand you a written price before a single screw turns.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.