New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Window Installation: The Orlando Owner’s Guide
We install CWS windows and replacement parts across Orlando, and a typical CWS window installation runs between $620 and $1,480 per window depending on size, series, and whether the existing frame gets reused or replaced. Most CWS swaps in the Orlando metro are completed in a single day once we have the right unit on hand. What usually prompts the call is a window that won’t seal anymore, fogged glass, or a roller that’s given up after years of Central Florida humidity and afternoon storms.
We’re an independent installer based in Orlando, not affiliated with CWS. What that means for you: we match the part to your exact model, give you a written price before any work begins, and stand behind it for a full year under our 365-Day Done Right Promise. Sean Mackey has been working with CWS products long enough to know which series has which quirk, and our technicians stock the most common CWS hardware on the truck so a lot of Orlando service calls are one-visit fixes.
Key takeaways:
- CWS window installations in Orlando typically run $620 to $1,480 per window, installed, with a written quote before we start.
- We carry common CWS replacement hardware: balances, rollers, latches, weatherstripping, and sashes.
- Every CWS installation we do is backed by the 365-Day Done Right Promise, covering parts and labor in writing.
- Call (850) 679-8554, and a real person picks up, 24/7.
Which CWS Models This Applies To
CWS products show up in Orlando under several series names, and getting the right part means knowing which one you have. The most common CWS lines we see in Central Florida homes are the traditionally styled single-hung and double-hung units, horizontal sliders in bedrooms and sunrooms, and a smaller number of casement and picture-window configurations. Each series has its own hardware spec, so a balance from a CWS 3000 series won’t necessarily fit a 5000 series, even if both windows look identical from the living room.
Your best move is to check the corner of the sash. CWS stamps a label, usually on the top or side rail, with the series number and sometimes the manufacturing date. If the label has faded off, which happens in Florida sun faster than most owners expect, measure the visible glass width and height, then snap a photo of the window from inside and outside. That photo and the measurements are usually enough for our team to confirm the correct CWS-compatible part before we ever roll a truck. For hardware like rollers and latches, many CWS windows use standardized hardware that crosses over between series, and we keep those on hand. For sashes, glass packs, and complete window replacements, we order the exact panel through our CWS supply channel, verifying the series before we quote. We’ll also tell you plainly when a quality aftermarket equivalent does the same job as the OEM part for less money, and when it doesn’t. Some CWS frame profiles only accept the original hardware cleanly, and forcing a generic part in is a shortcut we won’t take on your house.
Signs Your CWS Window Installation Is Failing
- Condensation or fog between the panes. The seal on the insulated glass unit has failed. In Orlando’s humidity, failed seals show up fast because moist air works its way in and condenses against the glass on cool mornings. When the seal goes, the glass package usually needs replacement, not repair.
- The sash drops or won’t stay open. That’s a failed balance. CWS balances wear out faster here because heat accelerates the spring fatigue inside the mechanism. When a window starts creeping down on its own, the balance has lost tension and needs swapping, not lubricating.
- You have to lift, wiggle, or body the window to get it moving. Rollers or glides have worn flat. Orlando homes near lakes and golf courses see extra grit in the tracks, and a flat roller drags the frame, which then chews up weatherstripping.
- Air moves around the closed sash, or daylight shows at the edges. The weatherstripping has compressed or torn. In a CWS window more than eight years old in Orlando, this is one of the first things to fail, and it drives your cooling bill up in summer.
- The window is harder to lock, or the latch no longer catches. Frame alignment has shifted slightly, or the keeper plate has worn. It’s a small part, but on an impact-rated window, a latch that won’t close completely means the window can’t perform as engineered during a storm.
Replacement Cost & What’s Included
For CWS window installation in Orlando, you’re looking at these installed ranges as of 2026:
| Service | Installed Range (Orlando) |
|---|---|
| Full CWS replacement window, standard size | $620 – $980 per window |
| Full CWS replacement window, oversized or impact-rated | $920 – $1,480 per window |
| IGU glass replacement (fogged seal) | $240 – $460 per unit |
| Balance replacement | $130 – $220 per sash |
| Roller or latch replacement | $90 – $180 per window |
What moves the price on a full installation is size, frame condition, and whether the existing frame gets reused or rebuilt. A flush-fin frame that’s still square saves time and money. A buckled frame hidden under stucco means more work, and we’ll tell you that before we start, not after. Every CWS installation we do in Orlando includes the new window or part, all hardware, fastening, interior and exterior caulking, and haul-away of the old unit. You get one written price before any tool comes off the truck, and if the number changes, you’ll know why and you’ll approve it before we proceed. Every completed installation is covered for 365 days, parts and labor, in writing.
DIY or Call Us?
Some CWS issues are safe to check yourself. If a sliding window is stiff, wiping out the track and confirming the drain holes aren’t plugged with Orlando pollen is reasonable. If a crank-out window is rubbing, checking for loose screws on the hinge is fine. But anything involving the balance mechanism or glass replacement is not a beginner job. CWS balances are under spring tension, and an unloaded balance released the wrong way can take off a finger. Glass package replacement on an impact-rated CWS window means correct bedding, glazing tape, and block placement, and a poorly set IGU will fail again inside a year. We’ve pulled plenty of DIY attempts apart in Orlando homes and found cracked frames and stripped hardware where someone forced a part that didn’t fit. For anything beyond cleaning a track, call (850) 679-8554. We’ll tell you on the phone whether it’s something you can handle yourself or something we should quote, and the estimate is free either way.
FAQs
Plan on 20 to 30 years for the frame, but expect weatherstripping to need replacement around year 8 to 10 and balances or rollers somewhere in the year 10 to 15 range in Orlando, largely because heat and humidity work on the hardware harder here than in a mild climate. The glass itself can last the life of the window if the seal holds.
Yes, a lot of the time. Fogged glass is a glass replacement, not a window replacement. Failed balances, rollers, and latches are hardware swaps we do in under an hour on most CWS units. The window gets replaced when the frame is rotted, warped, or when you want a higher performance rating, like moving from a single pane to impact-rated glass. Call (850) 679-8554 and describe what the window is doing, and we’ll tell you which path fits.
Most single-window CWS installations in Orlando are finished in half a day for a standard replacement and a full day when we’re building out a new rough opening or retrofitting impact-rated framing. A full house of windows typically runs two to four days depending on how many windows and how much exterior trim work is involved. We’ll give you a clear timeline on the written quote.
We stock the high-failure items: balances, rollers, latches, keepers, and common weatherstripping profiles for the CWS series we see most often in Orlando. Sashes and glass packages are built to order through our CWS supply channel and typically arrive within one to two weeks. If it’s a part we carry, we can usually fix the window on the first visit. Call (850) 679-8554 and ask, we’ll check the truck before we ever book the appointment.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.