New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The Orlando Owner’s Guide
We stock and install CGI-compatible impact garage doors throughout Orlando, with typical installed pricing running $2,400 to $6,800 depending on door size, panel design, and whether new tracks and hardware are part of the job. Most single-door swaps wrap up in a day, and we carry common CGI replacement components on our trucks so an owner with a failed spring, bent track, or shattered panel is not waiting on a two-week special order. How owners usually find us: the hurricane season stress-test happened, the door is now off its rollers, and the home no longer has a real impact-rated barrier protecting everything in the garage.
Which CGI Models This Applies To
CGI produces impact garage doors under a few different series lines, and the compatibility story matters more than people think. The big split is between CGI’s solid construction doors and their style-lined options. Here is the detail that trips up owners: CGI doors are built to a specific track-and-spring profile. A replacement panel from another Florida impact brand will not sit clean in a CGI track, and the hardware spacing is different. You cannot mix PGT. You cannot mix CWS. The door needs CGI panels with the CGI track and the matching CGI hardware set.
For identification, look at the inside of the door near the bottom panel. CGI stamps their doors with a manufacturer sticker showing the series name and wind-load designation. Common series lines have Miami-Dade NOA (Notice of Acceptance) approvals, and that approval number ties to the specific door profile. If the sticker is gone, measure the panel thickness and the hinge spacing and we will match it against the CGI spec sheet. On the OEM-versus-aftermarket question: aftermarket springs and rollers are fine for most CGI doors if they are rated for the same cycle count and gauge, but panels must be CGI. We use factory CGI components for any structural part, and that is not snobbery. It is warranty reality. A third-party panel voids the product approval on the whole opening.
Signs Your CGI Impact Garage Doors Is Failing
- The door lurches or sticks on one side. This usually means a roller has worn flat or a hinge is pulling loose from the panel face. On CGI doors, the heavy-gauge panels hide the wear longer than a lighter non-impact door, so by the time the owner feels it, the roller likely needs replacement now.
- Visible rust at the bottom corners and hardware. Orlando humidity plus garage-slab moisture wicks up into the panel edge. Once the steel rusts through the powder coat in the bottom rail, the panel loses its impact integrity and the rust will spread upward. This is the most common failure point for garage doors in the Orlando market. We see it in College Park, Conway, Winter Park, everywhere.
- A louder-than-normal opening cycle. A squeal or a bang is not normal. The spring is losing tension or a hinge is binding. Impact doors are heavier than standard doors, so a failing spring works harder and degrades faster.
- The door sags when halfway open. That sag says the spring assembly is no longer counterbalancing the panel weight. Left alone, you are dumping all that stress onto the opener and the track brackets.
- Daylight or water at the seal line. Bottom seal deterioration and threshold channel damage happen after a few Orlando rainy seasons. The seal is not just cosmetic. A gap breaches the pressure rating the door was designed to hold.
Replacement Cost & What’s Included
For an Orlando single-car CGI impact garage door, installed replacement runs $2,400 to $4,100. A double door runs $4,200 to $6,800. That is the honest spread, and here is what moves the number: door width, panel design (raised or recessed styles cost more than flat), whether the existing track and spring assembly is salvageable or needs full replacement, and whether you want a new opener as part of the job. Local code compliance is already in our number. We pull the permits, we set the written price before anything starts, and that price covers the door, hardware, labor, haul-away of the old unit, and the final inspection. The work is covered by the 365-Day Done Right Promise, in writing: if it is not right, we make it right, parts and labor, for a full year.
We write the quote in the driveway and the number does not change. That is not a marketing line. It is how Sean Mackey runs this crew.
DIY or Call Us?
Here is the straight answer: the torsion spring on a CGI impact door is not a DIY part. These springs are wound under massive tension, and an impact door spring holds more of it than a standard garage door spring. A wrong move sends a steel bar through drywall or through a hand. That is not an exaggeration. If the spring failed, call us. Same for track replacement and any panel swap that touches the pressure-rated assembly. What an owner can safely do themselves: keep the tracks clean, check the bolts, lubricate the rollers with a silicone-based lube, and test the auto-reverse sensor. That is the routine.
Everything else on the structural side, (850) 679-8554. We are licensed, insured, and the tech shows up in uniform with the parts on the truck.
FAQs
A properly maintained CGI impact door in the Orlando market typically lasts 15 to 20 years, with springs replaced every 7 to 10 years depending on cycle frequency. The Florida climate is the deciding factor: high humidity accelerates corrosion at the hardware points and bottom panel edges even on impact-rated doors. Regular lubrication of rollers and hinges, plus keeping the bottom seal intact, extends the functional lifespan. Call (850) 679-8554 and we can look at the wear on your specific door and tell you honestly what remains.
Yes, a single panel can often be replaced using the matching CGI part for your door series, assuming the door is not more than about ten years old and the surrounding panels are structurally sound. If the impact rating is expired or the adjacent panels have begun to rust, panel replacement becomes a short-term patch and a full door replacement is the better money. We will tell you which one makes sense for your door, not the one that makes the better sale. Estimates are free, and the number we give you is the number on the invoice.
A single-car CGI impact door swap in Orlando usually takes one day from teardown to final operating test. A double door with new tracks and full opener replacement can run a day and a half. We bring the panels, hardware, and springs on the first visit, so there is no multi-day gap with the garage open. The written price is set before the truck pulls up, and the job is not done until our tech walks the frame with you. Call (850) 679-8554 for a free estimate and a real timeline for your specific opening.
Do you stock CGI garage door parts, or do I have to wait for an order?
We stock common CGI replacement parts on our Orlando trucks, including
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.