New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Door Replacement in Orlando: What to Know First
CGI door replacement in Orlando typically runs $2,800 to $7,500 installed, depending on the series, glass package, and framing work involved. Most jobs take one to two days once the door arrives. We’re an independent CGI service provider in Orlando, not a manufacturer arm, so we quote replacement doors straight: the number we give you in writing is the number you pay, covered by our 365-Day Done Right Promise on parts and labor.
This page is for homeowners in Orlando who already own a CGI door that’s failing, or who want to replace an aging unit with CGI’s impact-rated build. If you know your series (Santorini, Estate, Targa, or Classic), we can talk specifics on the first call. If you don’t, our techs will identify it on site. Call (850) 679-8554 for a free replacement estimate.
How CGI Products Fail – and How We Fix Them
- Roller track wear on CGI Estate Series sliders. Orlando’s humidity plus fine grit from construction traffic grinds rollers down until the door drags or derails. When we replace an Estate slider, we upgrade the roller assembly to a sealed-bearing unit that shrugs off the grit instead of eating it.
- Warped panels on CGI Targa entry doors. South-facing Targa doors in Orlando take direct afternoon sun, and over time the metal skin can bow enough to break the weatherstrip seal. We replace the slab and rehang it in a reinforced frame so the new panel holds its line.
- Fogged glass on CGI Santorini hinged doors. Once the insulated glass unit loses its seal, Florida’s humidity fogs it from the inside and no amount of wiping fixes it. We swap in a new IG unit with a fresh sealant system rated for high-moisture climates, not the silica-fill some installers use as a band-aid.
- Corroded hinge screws on CGI Classic Series doors. Coastal-adjacent Orlando air carries salt, and it eats plated screws until the door sags and binds at the latch. We pull the old hardware, drill and fill the screw holes properly, and remount with stainless fasteners that don’t quit.
- Cracked impact glass on any CGI door. A rock from a mower, a stray baseball, a storm-tossed branch: the laminated glass does its job and stops the object, but the outer pane can crack while the door stays intact. We replace the sash or the full glass with a matching CGI-rated lite so your impact certification stays valid.
Our CGI Door Replacement Process
- 1
Call and book. A live person answers at (850) 679-8554, day or night. We book a diagnostic visit and give you a live arrival time you can track.
- 2
On-site diagnostic. Our tech identifies your CGI series, measures the opening, checks the frame, and documents what failed and why. You get this in writing.
- 3
Parts decision. We quote OEM CGI parts when they make sense for warranty integrity, and quality aftermarket parts when they match or beat the original spec for less. Either way, you see the price before we order.
- 4
Written quote, no surprises. The replacement door, hardware, framing, labor, haul-away: line by line, fixed. The price we hand you is the price on the final invoice, per our 365-Day Done Right Promise.
- 5
Install and test. Our background-checked techs install, level, seal, and cycle the door through every function. We walk the job with you before we call it done.
- 6
Done Right for a year. Every CGI door replacement is covered for 365 days, parts and labor, in writing. If something’s off, we come back and make it right at no charge.
What CGI Door Replacement Costs in Orlando
Here’s the honest range for the jobs Orlando homeowners call us about most:
| Replacement Job | Typical Price Range |
|---|---|
| Sliding glass door, CGI Estate or Targa series, standard glass | $2,800 – $4,200 |
| Hinged entry door, CGI Santorini or Classic, impact glass | $3,500 – $5,500 |
| Panel replacement only (existing frame is solid) | $1,400 – $2,600 |
| Full tear-out and new frame, any CGI door | $4,500 – $7,500 |
What moves the price: glass package (standard insulated vs. impact-rated), door size, frame condition, and whether we’re matching an existing finish. Call (850) 679-8554 for an exact quote. You’ll have a written number in hand before any work starts.
Why Orlando Homeowners Call Juniper Windows Orlando for CGI Work
Orlando homeowners call us because we speak CGI. Our owner, Sean Mackey, has spent well over two decades focused on windows and doors specifically, and he trains every tech to know CGI series quirks the way a mechanic knows a specific engine. That means we diagnose the real problem on the first visit, not the third.
We also keep honest around here. Every replacement door gets a written price before a single screw turns, with the 365-Day Done Right Promise behind it: 365 days, parts and labor, in writing. You get a live arrival time, before-and-after photos, and a digital invoice you can pay online. And if you’re weighing CGI against other brands, we also service PGT, CWS, ES Windows, and ECO Window Systems, so the right door for your Orlando home is never a compromise.
Sean’s rule, and ours: “If I wouldn’t put it on my own house, I’m not putting it on yours.”
FAQs
As an independent CGI service provider, we follow manufacturer guidelines so your glass and frame warranties stay intact, but we are not a CGI warranty agent. Our work itself is covered by our own 365-Day Done Right Promise on parts and labor. Call (850) 679-8554 and we’ll walk through what your specific CGI door is covered for.
Most CGI door replacements in Orlando take one to two days of on-site work once the door is in our hands. Panel-only swaps with a solid frame can often be done in a single day, and full tear-outs with a new frame run two. We’ll give you a firm timeframe when we quote the job.
If the frame is solid and the failure is isolated (a single panel, a roller assembly, one hinge set), a repair usually runs $350 to $1,100 in Orlando. If the slab is warped, the glass is fogged, or the frame has shifted, replacement is the honest call. Call (850) 679-8554 for a diagnostic visit and we’ll tell you which one makes sense for your door.
We use OEM CGI parts whenever the door is under manufacturer warranty or when matching specific finishes matters. For out-of-warranty doors, we offer quality aftermarket parts that match or beat the original spec, and we show you both prices before you choose.
Yes. Our techs identify the CGI series on site (Santorini, Estate, Targa, or Classic) and quote straight from there. You don’t need to know the model name before you call (850) 679-8554; we’ll figure it out in person.
Written by Sean Mackey, Owner, Juniper Windows Orlando at Juniper Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.