CGI Window Installation Nationwide

CGI Window Installation: The Orlando Owner’s Guide

CGI window installation in Orlando typically runs $85 to $160 per window for a standard sash replacement or hardware swap, and $750 to $2,400 per opening when the full frame needs to come out. We carry CGI-compatible parts on our trucks, so most jobs we complete same-day once we’ve confirmed your model and measurements. The way most Orlando homeowners discover they need us: a window that suddenly won’t close flush, a crank that spins without moving the sash, or a lock that refuses to throw after years of Florida humidity working on the frame.

Call (850) 679-8554

If you’re holding a broken balance, a stripped operator, or a warped sash and wondering if it’s worth fixing, the short answer from Sean Mackey and our crew: yes, and it’s usually cheaper than you think when the frame itself is still solid.

Which CGI Models This Applies To

CGI’s Orlando install base spans three main lines: the Estate Collection (aluminum, impact-rated, commonly found in Dr. Phillips and Windermere homes built after 2005), the Classic Collection (their original impact line, still common in College Park and Winter Park ranches), and the Targa Series (newer, sleeker sightlines, popular in Lake Nona and Baldwin Park builds). The part you need depends on which line you have, and here’s the compatibility gotcha most owners hit: Estate and Classic window parts are not interchangeable despite looking nearly identical from five feet away. The balance channels differ by 3/16 of an inch on many models, and the operator spline sizes don’t match.

To identify your window, open the sash and look for a small white or silver sticker on the frame edge or the top rail. CGI prints the series code there, usually something like “E-100” or “CL-80.” If the sticker’s gone (sun and humidity eat them), measure the visible glass width and the frame depth, and take a photo of the balance channel. We’ll match it to the right CGI parts list, or if CGI has discontinued the exact part, we’ll spec a quality aftermarket equivalent that meets the same DP rating. We stock both OEM CGI components and trusted aftermarket replacements, because on a 15-year-old Estate window, waiting six weeks for a factory balance makes no sense when a direct-fit equivalent is on our truck.

Signs Your CGI Window Installation Is Failing

• Sash drops hard when you release it. The balances inside the side channels have lost tension or snapped. In Orlando, the constant heat cycling on west-facing windows shortens balance life to roughly 8 to 12 years. One hard drop is the warning, two drops and you risk cracking the sash corner.
• Crank turns but the window barely opens. The operator gear is stripped or the arm linkage has bent. We see this a lot on Estate Series casements where the arm pivot corrodes from condensation, then the next full crank shears the gear teeth.
• Window won’t lock when you close it. The keeper or strike plate has drifted because a faster-than-normal frame shift from humidity put the sash slightly out of square. This is a machine bolt and alignment fix on most CGI units, not a lock replacement, but the longer it stays unlocked, the more dirt packs into the track and the worse it gets.
• You feel air moving around the closed sash, especially on east-facing windows after storms. Weatherstripping has compressed or torn, letting AC escape all day. On impact-rated CGI windows, that gap also means the window’s not maintaining its design pressure rating worth much when the next storm season lines up.
• Water collects on the interior sill after heavy rain. The weep holes are clogged, or the gasket at the sill has failed. In some cases it’s a simple flush we can clear in minutes; in others, the sill extrusion itself has warped from standing water and needs replacement before the wood underneath starts to rot.

Replacement Cost & What’s Included

For a parts-level CGI window installation in Orlando, you’re looking at:

• Window balance replacement: $85 to $180 per sash, installed, including the new balances and alignment check.
• Operator and crank replacement: $110 to $190, depending on whether it’s a single-arm or dual-arm unit.
• Lock, keeper, and strike plate replacement or reset: $70 to $140 per window.
• Full frame replacement with new impact-rated CGI or equivalent unit: $750 to $2,400 per opening, driven by size, glass package, and whether the interior trim survives removal.

Every quote is a written line-item price before we touch a screw. That’s the Juniper standard across the board. What’s included in the parts jobs: the part itself, installation, adjustment of the surrounding hardware so the window operates like the others, and cleanup. Our work is covered by the 365-Day Done Right Promise, parts and labor, in writing. If the sash drops again in six months, we’re back out at no charge.

DIY or Call Us?

You can check a few things safely. Look at the sticker for your series code. Note where the failure happens: does the crank bind at a specific point, does the sash drop at a certain height, does the locking handle not quite reach? Pull the sash out on a sliding window if it lifts freely and inspect the balance shoes. That’s good information to bring us.

The part to not DIY: any balance or spring mechanism still under tension. If the balance isn’t visibly broken but the sash is acting dead, forcing the window can release stored tension into your hands or the glass. That’s not a caution from a corporate brochure, it’s what we tell our own techs, and the reason we carry the tools to de-tension a window before opening the channel. A stripped operator or a bum lock? That’s a Saturday fix for a confident homeowner. The moment a window drops hard or a balance lets go, call us at (850) 679-8554. We’ll quote it over the phone, then lock the number in writing.

FAQs