New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Windows & Doors in Orlando, FL | Juniper Windows Orlando
We provide independent ES Windows repair, retrofit, and Window Replacement in Orlando service across Orlando, FL. The difference here: we know exactly how ES Windows frames and hardware behave after ten or twenty years of Florida humidity, afternoon thunderstorms, and hurricane bands. Sean Mackey and our crew have worked on ES Windows installations from College Park to Lake Nona, and the number we quote in the driveway is the number on your invoice. Call (850) 679-8554 for a free estimate.
We are not an ES Windows authorized dealer or factory branch. We are an independent service provider, which means our recommendations lean repair-first when the frame is sound, and replacement when it isn’t. Our only allegiance is to the window, not the brand. See our full ES Windows sales & service coverage for what we handle.
Why Orlando Residents Choose Us for ES Windows Service
Sean Mackey grew up in Los Angeles and trained at Los Angeles Trade-Technical College before moving his operation east to serve Central Florida. He has spent over two decades focused on windows and doors specifically, not siding, not roofing. That narrow focus matters when you need someone to diagnose a fogged IGU or a seized roller without guessing.
Our techs work ES Windows units every week in Orlando. They know the 7300 Series single hung inside and out, the 7500 Series impact casement, the 7600 Series sliding door, and the 7800 Series picture window. They know which balances wear first, which weatherstripping fails in Florida sun, and which track materials pit under wind-driven rain. Every tech is background-checked and uniformed. Every job gets a written price before work begins, covered by our 365-Day Done Right Promise: if it isn’t right, we make it right, for a full year after installation, parts and labor in writing.
Sean’s rule is simple, and you’ll hear it on job sites around Orlando: “If I wouldn’t put it on my own house, I’m not putting it on yours.” That is the standard, not a slogan.
Common ES Windows Windows & Doors Problems We Solve in Orlando
- Fogged double-pane glass on ES Windows 7300 and 7800 Series units. Orlando’s humidity and daily thermal cycling push moisture into failed IGUs fast. Once the desiccant inside the spacer is saturated, the fog never clears. We replace the IGU with matching low-e glass rated for Florida sun, not a generic off-the-shelf panel.
- Corroded aluminum tracks and collapsed rollers on 1980s ES Windows 7600 Series sliding doors. Original tracks in Conway and Pine Hills homes have often pitted from decades of wind-driven rain. Rollers seize, the panel scrapes, and eventually the door won’t move at all. We machine the track smooth where possible and install heavy-duty stainless roller carriers.
- Warped or swollen frame corners on non-impact ES Windows models. Summer downpours find every gap. Non-reinforced ES frames on older Orlando homes absorb moisture at the corners, making sashes bind and latches misalign. We re-square, re-seal, and re-weatherstrip or recommend full-frame replacement when warping is structural.
- Milky, failing low-e coating on west-facing windows in subdivisions like Baldwin Park. Intense afternoon UV breaks down the metallic coating from the outside in. The glass looks permanently smeared. This is not salt damage, it’s coating failure, and the fix is new glass, not more cleaning.
- Failed balances on ES Windows 7300 Series single hung units. Orlando heat accelerates spring and coil balance fatigue. A window that slams shut or won’t stay up is a safety issue and a sign the balance system is done. We stock common ES-compatible balances locally to avoid weeks of waiting.
ES Windows Service in Orlando: What Local Conditions Mean for Your Equipment
Here is the thing about Orlando that most window companies miss: we sit inland, so the building code push for impact glazing arrived later and hit softer here than in coastal counties. Many Orlando homes still have original 1980s ES Windows that were never upgraded to post-2002 Miami-Dade impact standards. That retrofit gap is real, and it shows up every time a hurricane band pushes inland with tropical-storm-force gusts. A window that held fine through ordinary thunderstorms becomes the weak point when wind-driven debris starts hitting it at 70 mph. Our retrofit work on those legacy ES frames, adding impact-rated glazing and reinforced hardware where the existing frame can carry it, is often the difference between a breached opening and a dry living room. We have done this work on 1990s concrete block homes near Conway, where the aluminum track on a 7600 Series sliding door had pitted from years of wind-driven rain and the rollers had collapsed. We machined the track smooth, replaced the roller assemblies with heavy-duty stainless carriers, and added fin seal weatherstripping to stop the afternoon thunderstorm leaks that had warped the baseboard next to the door.
That is the Orlando-specific reality: our humidity rots seals, our thunderstorms hammer tracks, and our inland location means many homeowners are sitting on windows that would have been replaced years ago if they lived in West Palm Beach. Our job is to tell you which ES Windows units are worth repairing and which need to go.
ES Windows Models & Products We Service in Orlando
We service the full ES Windows residential line you are likely to have in an Orlando home:
- ES Windows 7300 Series Single Hung – balance replacement, tilt-latch repair, glass replacement, weatherstripping.
- ES Windows 7500 Series Impact Casement – hinge and crank repair, impact glass replacement, seal and hardware service.
- ES Windows 7600 Series Sliding Glass Door – roller replacement, track machining, lock and handle repair, weatherseal renewal.
- ES Windows 7800 Series Picture Window – IGU replacement, low-e coating failure, frame re-sealing.
For parts, we source genuine ES Windows components for glazing, balances, and weatherstripping when they are available. When hardware is discontinued or on long lead time, we use high-grade aftermarket components matched to Miami-Dade or Florida Product Approval specs. You will know which is going into your window before we start, and it will be on the written quote. We lean repair-first when the frame is sound, but for pre-2002 windows without impact ratings, we tell you plainly: full-frame replacement with modern impact glazing is often the smarter long-term spend.
ES Windows Service Pricing in Orlando
Most ES Windows service calls in Orlando land in predictable ranges, and you should know them before you call:
| Service | Typical Range |
|---|---|
| Sliding glass door roller replacement (7600 Series) | $180 – $320 |
| Single hung balance replacement (7300 Series) | $140 – $240 per window |
| Double-pane IGU replacement (fogged glass) | $280 – $520 per sash |
| Impact casement hardware repair (7500 Series) | $160 – $300 |
| Full-frame impact window replacement (per opening) | $900 – $1,800 depending on size and glass package |
What drives the cost: glass package, whether the frame is salvageable, and what parts are available locally versus on order. A free estimate includes the diagnosis, a written line-item quote, and our recommendation on repair versus replace. Call (850) 679-8554 and we will give you the real number, not a range that changes at the door.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Windows & Doors in Orlando
Sometimes, yes. We can add impact-rated glazing and reinforce the existing ES Windows frame if it is structurally sound and meets the opening size requirements for retrofit under Florida Product Approval. Many 1980s frames in Conway and Pine Hills are candidates; many are too pitted or flexy to carry impact glass. We will tell you which yours is after a free inspection. Call (850) 679-8554 to schedule one.
Fog between the panes means the IGU seal has failed. Orlando’s humidity and daily heat-cool cycles eventually saturate the desiccant spacer in the glass unit, and once that happens, the fog is permanent. The fix is replacing the IGU, not cleaning the glass. We match the replacement to your existing low-e coating and tint. Call (850) 679-8554 for a quote on IGU replacement.
They can be. The 7500 Series impact casement is a solid choice for concrete block homes where the existing openings are standard sizes and the frames can be properly anchored. The key is a clean, square Window Installation - Orlando with correct flashing, which older block homes often need extra work to achieve. We walk you through what that means for your specific openings before you commit.
It is almost certainly low-e coating failure from years of Orlando UV exposure on the exterior glass surface. Salt damage is rare this far inland. Once the metallic coating degrades, it cannot be restored. The glass unit needs replacement with a new low-e package rated for Florida sun. Call (850) 679-8554 for an exact quote. Estimates are free.
We stock the most common ES Windows 7300 Series balance lengths and spring weights locally in Orlando, so most single hung balance jobs are done in one visit. If your window needs a non-standard balance, we order it the same day and install it as soon as it lands, usually within five to seven business days. Call (850) 679-8554 and we will tell you which applies to your window.
Service Areas Near Orlando
We work across the Orlando metro and nearby communities. If you are in Orlando service area, Kissimmee, Altamonte Springs, Clermont, DeBary, or Lake Mary, we can schedule ES Windows service at your home. See ES Windows service in Kissimmee or ES Windows service in Altamonte Springs for local details in those areas.
Book Your ES Windows Service in Orlando Today
If you have an ES Windows unit that is fogging, sticking, leaking, or just not closing right, call (850) 679-8554. We will get a real person on the phone, schedule a free estimate, and put the price in writing before any work starts. Same-day and next-day slots are often available across Orlando.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.