New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Windows & Doors in Orlando, FL | Juniper Windows Orlando
We provide independent PGT windows and doors service across Orlando, from College Park to Lake Nona. We’re not a factory-authorized dealer, and that’s actually the point: we repair what can be repaired, replace what can’t, and quote you a written price before any work starts. If you own a PGT WinGuard, SpectraGuard, PremierVue, or Eze-Breeze product in Orlando, call (850) 679-8554 and you’ll get a real person, a straight answer, and a free estimate.
Our PGT work in Orlando is different because we understand how this city’s specific conditions, hurricane wind zones, afternoon thunderstorms, high humidity, brutal UV, break down PGT products. A hazy WinGuard sash in Baldwin Park isn’t the same problem as a hazy WinGuard sash in Kissimmee, and we treat them accordingly. For full details on our PGT sales & service capabilities, read on.
Why Orlando Residents Choose Us for PGT Service
We’ve been doing windows and doors specifically, not siding, not roofing, for over two decades. Sean Mackey, our owner, learned the trade at Los Angeles Trade-Technical College before moving the operation east to serve Central Florida. He’s spent years working neighborhoods from College Park to the edges of Lake Nona, swapping leaky single-panes for impact-rated units through our Window Installation in Orlando that can stand up to a Florida storm season. That means we can walk you through U-factor ratings and frame sightlines without making your eyes glaze over.
What we bring to PGT service in Orlando is simple: familiarity with the actual failure points. We know which PGT rollers seize up, which weatherstripping compresses, and which glass coatings fail under our sun. And every tech who knocks on your door is background-checked, uniformed, and carrying a written price before a single screw turns. Our Orlando service area covers the whole metro, and we answer the phone 24/7.
Common PGT Windows & Doors Problems We Solve in Orlando
- Cloudy or hazy WinGuard impact glass. Early-2000s WinGuard units in Orlando often show interlayer lamination failure after two decades of UV exposure. The glass looks fogged from the inside, but it’s actually the impact interlayer breaking down. We can replace the sash while keeping the original frame, provided the frame is still sound.
- Corroded and seized sliding door rollers. In 1980s and 90s homes near Conway and Pine Hills, original PGT sliders sit on aluminum tracks that corrode in our humidity. Rollers seize, doors drag, and eventually the track needs cleaning and re-lubrication or a stainless steel roller assembly swap.
- Wind-driven rain leaks on SpectraGuard double hungs. Orlando’s afternoon thunderstorms hit fast and hard. When SpectraGuard weatherstripping compresses or tears, water pushes through the meeting rails. We replace the weatherstrip with PGT-compatible material and check the sash alignment so the seal actually seats.
- Degraded low-e coatings on newer PGT windows. Homes built after 2004 in Baldwin Park and similar developments were required to use impact glass, but that doesn’t mean the coatings last forever. We see tint flaking and iridescent spotting on PGT units that face full afternoon sun. It’s a glass replacement, not a frame replacement.
- Eze-Breeze porch enclosure panel failures. Orlando homeowners with screened porches often upgrade to Eze-Breeze vinyl panels. After enough UV and humidity, those panels get brittle, cloudy, and hard to slide. We replace individual panels and service the track system.
PGT Service in Orlando: What Local Conditions Mean for Your Equipment
Here’s something most PGT owners in Orlando don’t realize: a PGT impact window on one side of town is not the same product as a PGT impact window on the other side. Orlando’s 2002 Florida Building Code wind-load requirements split the city into different pressure zones. Homes east of Interstate 4, like Baldwin Park, are tested to higher design pressures than older west-side neighborhoods. So when we match our Window Replacement in Orlando glass or a new sash, we don’t just match the brand label, we match the original design pressure for your specific location. A generic PGT page won’t tell you that. A contractor who doesn’t check the pressure zone might sell you a window that technically fits but doesn’t meet the wind-load requirement for your street.
We’ve seen this play out in real time. In a 1995 concrete-block home near Pine Hills, our tech found a PGT SpectraGuard horizontal roller with failed interlayer and a seized track. We replaced the roller assembly with an aftermarket stainless steel carriage, cleaned and re-lubricated the original aluminum frame, and ordered a custom genuine PGT impact sash matching the 45 psf design pressure of the original. The window stayed original wherever possible without sacrificing the impact rating. That’s how PGT service in Orlando should work.
PGT Models & Products We Service in Orlando
We service all the major PGT lines Orlando homeowners actually have in their houses:
- WinGuard (aluminum and vinyl impact-resistant): the workhorse of Orlando’s post-2002 code-compliant construction.
- SpectraGuard (vinyl impact-resistant): common in 1990s and early 2000s concrete-block homes.
- PremierVue (vinyl non-impact): often found in interior and non-impact applications.
- Eze-Breeze (sliding patio door and porch enclosure): popular in Orlando’s screened porch and lanai conversions.
We source genuine PGT replacement sashes, rollers, and weatherstrips where they exist. For discontinued pre-2000 models, we use quality aftermarket parts that match or exceed original tolerances rather than condemning the frame. We recommend replacement only when the frame’s structural integrity or impact certification is compromised. If the glazing and frame are still sound, we repair rollers, locks, and seals instead. Our name comes from a hardy evergreen built to handle sun, wind, and cold. Fitting for what PGT windows and doors are supposed to do in Orlando.
PGT Service Pricing in Orlando
PGT service pricing in Orlando depends on what’s actually wrong. Here’s what you can expect:
- Sliding door roller replacement: $180 to $360 per door, including parts and labor.
- Weatherstripping replacement on a double hung: $120 to $240 per window.
- PGT impact sash replacement (glass only, frame reused): $450 to $900 per sash, depending on size and design pressure.
- Full PGT window replacement (frame and glass): $850 to $1,600 per window, installed.
- Eze-Breeze panel replacement: $120 to $280 per panel.
These are honest ranges for Orlando’s market, not teaser numbers. Your written quote covers parts, labor, and disposal. No estimate that morphs into a surprise invoice. Call (850) 679-8554 and we’ll walk through what you have, what it needs, and what it’ll cost. The estimate is free, and the number we give you in writing is the number on the invoice. The 365-Day Done Right Promise covers parts and labor for a full year after any installation we complete.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Windows & Doors in Orlando
Yes. If the frame is still sound and the impact certification is intact, we replace the failed sash while keeping the original frame. That said, once the interlayer lamination has visibly failed, the glass no longer carries its full impact rating, so replacement is the right call for storm protection. Call (850) 679-8554 and we’ll assess the unit in person.
We replace just the rollers whenever the door’s frame, glass, and track are still sound. In 1990s Orlando homes we typically swap the original rollers for stainless steel carriage assemblies, clean and re-lubricate the aluminum track, and adjust the door alignment. A full door replacement is only necessary when the frame itself is corroded through or the impact glass has failed. Call (850) 679-8554 for a written quote on roller service.
Yes, absolutely. Orlando’s 2002 Florida Building Code introduced higher wind-load design pressure requirements for homes east of Interstate 4. A 2004 Baldwin Park PGT impact window is tested to a different design pressure than a 1985 Conway window. That’s why we match replacement glass and frames to the original pressure zone for your specific address, not just the PGT model label.
We’re an independent service provider, not a factory-authorized PGT dealer, so we can’t administer or maintain the manufacturer’s warranty on your behalf. What we do provide is our own 365-Day Done Right Promise, which covers parts and labor on our work in writing for a full year. For factory warranty issues, we can document the failure and provide the photos and measurements you’ll need to file a claim.
Both. We stock common PGT rollers, weatherstrips, and hardware locally in Orlando for fast turnaround on typical repairs. For custom impact sashes or specific glass packages, we order from PGT or a certified fabricator, which usually takes two to three weeks. The free estimate tells you exactly what’s in stock and what needs to be ordered. Call (850) 679-8554 to get started.
Service Areas Near Orlando
We serve all of Orlando and the surrounding Central Florida communities. That includes PGT service in Kissimmee to the south, PGT service in Altamonte Springs to the north, plus Clermont, DeBary, and Lake Mary. If you’re anywhere in the Orlando metro and own a PGT window or door that’s giving you trouble, we’ll come take a look.
Book Your PGT Service in Orlando Today
If your PGT windows or doors in Orlando are cloudy, dragging, leaking, or just not closing right, call (850) 679-8554 today. We’ll schedule your free estimate, give you a written price, and get the work done right. If I wouldn’t put it on my own house, I’m not putting it on yours.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.