New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Orlando Homeowners Choose PGT Windows & Doors
We provide independent PGT in Orlando windows and doors service, from single-hung balance repairs to full impact-rated replacements. Our crew has worked on PGT products in this market for over a decade, and we know exactly how Orlando’s humidity and storm cycles stress these specific frames, balances, and seals. Juniper Windows Orlando is not an authorized PGT dealer or warranty center. We’re an independent service provider that fixes PGT products the way they actually fail in Central Florida, using factory-spec or premium aftermarket parts and a straight written price before any work begins. If your PGT window or door is acting up, call (850) 679-8554 and we’ll tell you what’s wrong and what it costs to fix.
Why Trust Juniper Windows Orlando for Your PGT Windows & Doors?
Sean Mackey, the owner behind Juniper Windows Orlando, grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before moving his operation east to serve Central Florida. For years, his crew has worked neighborhoods from College Park to the edges of Lake Nona, replacing leaky single-panes with impact-rated units built for Florida storm season. Sean has spent well over two decades focused on windows and doors specifically, not siding or roofing. That means when a WinGuard single hung won’t stay up or a SpectraGuard vinyl window has fogged glass, he can walk you through the failure without making your eyes glaze over.
What does that look like in practice? Our techs have rebuilt PGT sashes, swapped failed roller assemblies, and reglazed fogged insulating glass units thousands of times across Orlando. We know the common PGT failure points by memory, and we stock the parts that fail most often so we’re not waiting on a parts counter. Every job gets a written price before we start. No estimate that morphs into a surprise invoice. And every completed install is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right, parts and labor, for a full year, in writing. Sean walks every job himself at the end. If a latch doesn’t close clean or a sash doesn’t glide, it gets fixed before we leave.
Common PGT Windows & Doors Problems We Fix in Orlando
PGT builds solid products. Orlando’s climate still finds ways to break them. Here are the failures we see week after week.
- Worn spiral balances in WinGuard single and double hung sashes. The spiral balance is the coiled tension mechanism inside the window jamb that holds the sash up when you lift it. In Orlando’s heat and humidity, the internal spring fatigues, and one day the sash slowly creeps down or drops suddenly when you let go. We replace both balances in a pair, set factory tension, and the window stays where you put it.
- Failed insulating glass seals in SpectraGuard vinyl windows. That interior fog you can’t wipe off means the seal between the two panes has failed, and humid Orlando air has worked its way inside the glass pack. A failed IGU isn’t just cosmetic. It cuts the window’s insulating performance significantly. We replace the glass pack, not the whole frame, when the frame and hardware are still sound.
- Corroded or seized roller assemblies in PGT horizontal sliders. Coastal salt air isn’t the only culprit in Orlando. Irrigation overspray plus high humidity corrodes the steel axles and sleeves in slider rollers, and the window turns into a two-handed shoulder job. We replace the roller assemblies, clean the track, and adjust the sash so it slides with one finger again.
- Stress cracks at corner welds on older PGT 5500 series vinyl frames. The 5500 series is a workhorse, but the early production frames on some Orlando homes develop micro-cracks at the welded corners after years of thermal cycling and wind load. A corner crack is structural. It compromises the frame’s torsional stiffness, and it’s a sign the frame is reaching the end of its service life. We’ll tell you straight when a new frame beats another repair.
- Builder-grade PGT installations from 10-plus years ago with worn weatherstripping and failing low-e coatings. Post-2004 Orlando homes, especially in developments like Baldwin Park, got impact glass as code required, but the original weatherstripping on those units is often compressed flat by now, and a lot of those early low-e coatings are showing visible degradation from Florida UV. We re-seal, replace weatherstripping, and swap in new sash where the coating has failed.
Sean’s rule applies to every one of these: “If I wouldn’t put it on my own house, I’m not putting it on yours.”
PGT Parts & Our Repair-vs-Replace Approach
We use exact factory-spec or premium aftermarket balances, rollers, and weatherstripping that match PGT’s original tolerances. Aftermarket parts from reputable suppliers often outperform the original in one way: newer roller materials hold up better against Orlando’s humidity and irrigation splash than the original steel assemblies PGT used in some mid-2000s sliders. We also maintain local stock of the most common PGT repair parts: spiral balances for single and double hungs, roller assemblies for horizontal sliders and Eze-Breeze panels, pivot locks, and weatherstripping profiles.
Here’s how we decide repair versus replace. If the frame is square, the glass pack is clear, and the hardware is serviceable, we repair. That’s the honest call for most failed balances and rollers. If the frame is warped, the glass pack has blown, or the window is a pre-2002 unit with unprotected single-pane glass, we recommend our Window Replacement services with a current PGT impact-rated unit. We’ll quote both options with real numbers and let you decide. Call (850) 679-8554 if you want an exact price on either path, estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. You book online or call. A background-checked, uniformed tech arrives with a live arrival time you can track, not a four-hour window. We inspect the specific PGT unit, identify the failed part, and document what we found.
- 2
Written price. Before any work starts, you get a line-item written price. That’s non-negotiable with us. The number Sean quotes is the number on the invoice.
- 3
Repair or replacement. We install factory-spec or premium aftermarket parts matched to PGT’s tension and tolerance specs, or we schedule the full replacement with the right current PGT impact-rated product for your opening.
- 4
Testing and adjustment. We cycle every sash, slide every panel, check every latch and weatherstripping run. If a balance tension isn’t right or a roller doesn’t track clean, we adjust it before we call the job done.
- 5
Walkthrough and warranty. Sean or the lead tech walks the work with you, and you get the 365-Day Done Right Promise in writing: parts and labor covered for a full year. You also get before-and-after photos and a digital invoice you can pay from a link.
PGT Products We Service & Install in Orlando
We work on all the major PGT product families: WinGuard Aluminum Impact windows and doors, SpectraGuard Vinyl, the PGT 5500 Series, and Eze-Breeze vinyl sliding panels. Within those, our most frequent service requests are for single and double hung windows, horizontal roller windows, casement windows, and sliding glass doors. We also install new PGT impact-rated units for full replacements in PGT in Kissimmee and Orlando, including hurricane impact windows required by current Florida code for new construction and major remodels. Our local stock covers the common balance and roller parts so most repairs in Orlando happen in one visit.
We Also Service These Brands
PGT is a big part of our Orlando service volume, but it’s not the only brand our techs know cold. We also service and install CGI, CWS, ES Windows, and ECO Window Systems products across Central Florida. If you have a mixed-brand home, one crew can handle all of it, and you only have to book once.
FAQs – PGT Windows & Doors Service in Orlando
No. We are an independent PGT service provider. We are not affiliated with, authorized by, or endorsed by PGT Industries. What that means for you: we’re not limited to PGT’s warranty service network, we can recommend when a repair beats a replacement without a factory incentive to sell new product, and we use factory-spec parts without the overhead. If you want a second opinion on a PGT warranty claim, we’ll give you an honest one.
We use exact factory-spec parts, and where a premium aftermarket part does the job better in Orlando’s climate, we use that and tell you why. For example, some aftermarket roller assemblies for PGT horizontal sliders use a different axle material that resists corrosion from irrigation overspray better than the original. We never install a part that doesn’t match the original tolerance. If you specifically want OEM, we can source it, but it usually adds lead time and cost without improving the result.
Storm-driven rain forces water into the operator hardware, and once the crank gears and hinge slides lose their lubrication, the window gets stiff. Sometimes it’s a bent operator arm from wind load. We clean and relubricate the operator assembly first, check the hinge track for debris and wear, and replace the operator if the gearing is stripped or the arm is bent. Call (850) 679-8554 and we’ll diagnose it in person, estimates are free.
Yes, when the frame and hardware are still sound. We remove the failed insulated glass unit, order a new IGU to the original dimensions and spec, and reglaze the sash. If the vinyl frame has stress cracks at the welds or the weatherstripping channels are shot, we’ll tell you straight that a new window makes more sense than a new glass pack. The exact number depends on the glass size and coating, so call for a written quote.
Usually both. The rollers corrode and the bearings seize, then the dragging wheels gouge the track and pack the groove with dirt and oxidation. We pull the sash, replace the roller assemblies, clean and inspect the track, and adjust the sash height so the new rollers contact correctly. If the track is deeply gouged, that sash has to come out anyway, so we’ll show you what we found before any repair begins.
Yes, and that’s half of our Orlando work. Builder-installed PGT units from the mid-2000s are now hitting the age where balances fail, rollers seize, and low-e coatings degrade. Even though these windows were installed under post-2002 code, they may not meet current wind-load requirements for your zone. We can service what’s repairable and tell you honestly when a replacement is the better call. Call (850) 679-8554 for an assessment.
Look for structural signs: a frame that’s warped or sagging, stress cracks at the corner welds, a glass pack that’s fogged, or a sash that’s out of square. Any one of those usually means the window has reached the point where band-aid repairs cost more than the remaining service life is worth. We also check whether your unit meets current Florida Building Code wind-load and impact requirements. If it doesn’t, that’s the strongest argument for replacement. We’ll give you both options in writing. Call (850) 679-8554 to schedule a look.
PGT repair work in Orlando typically runs $145 to $385 for common jobs like balance replacements, roller swaps, and weatherstripping. Reglazing a fogged SpectraGuard IGU runs $220 to $550 depending on glass size and coating. Full PGT impact-rated replacement windows in Orlando run roughly $750 to $1,900 per opening installed, and sliding glass doors run $2,200 to $5,500, with the spread driven by frame material, glass package, and whether the opening requires structural changes. These are Orlando-specific ranges based on what we quote week to week. Call (850) 679-8554 for an exact line-item price, the estimate is free and it’s in writing before anything starts.
Book Your PGT Service in Orlando, FL
If your PGT window won’t stay up, fogged glass won’t clear, or a slider fights you every time you touch it, call (850) 679-8554. We’ll schedule the visit, send a live arrival time, and hand you a written price before any work starts. That’s the Juniper standard, and Sean stands behind it.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Orlando since 2001.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.