New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Union Park
Window replacement in Union Park typically runs $600 – $1,400 per opening for an insert replacement and $900 – $2,200 for a full-frame job, depending on impact rating, glass package, and whether the existing jamb is salvageable. Most homes here need the work done before the next hurricane season, not after it. We’re the local crew that pulls the Orange County permit, sets every window to Florida Product Approval, and hands you a written price before ordering a single sash. Call (850) 679-8554 for a quote that already accounts for Union Park’s wind-borne debris zone requirements.
Why Juniper Windows Orlando Is Union Park’s Preferred Window Replacement Company
Union Park homeowners call us because we show up knowing the difference between a 1960s ranch on Semoran-adjacent streets and a 1980s frame home off Dean Road. Those two houses need different flashing details, different rough-opening prep, and sometimes different impact ratings. Our neighbors in Union Park keep our calendar full because the written price holds, the crew arrives when the app says they will, and the 365-Day Done Right Promise covers parts and labor for a full year after install.
Every job gets a real person on the phone when you call, a live arrival time you can track, before-and-after photos, and a digital invoice you can pay from your phone. No four-hour windows. No no-shows. That’s what separates us from the general contractors who dabble in windows between kitchen remodels.
We’re part of the Relay Home Co. family, founded in 2001, and run locally by Sean Mackey. Our techs wear uniforms, pass background checks, and know Union Park’s housing stock well enough to quote accurately from the first visit.
Window Repair in Union Park
Window repair in Union Park usually means addressing one of three things: a failed insulated glass unit that’s fogged between the panes, a corroded aluminum frame that no longer seals against afternoon downpours, or a sash that’s dropped out of square and rattles in every thunderstorm. Depending on the failure, repair typically runs $180 – $520. A new insulated glass unit for a standard double-hung starts around $240, while rebuilding a rotted wood jamb or replacing a corrosion-damaged aluminum track can push toward $600 – $900 when framing work is involved.
Seal Failure and Fogged Glass
Union Park’s humidity means failed seals show up fast. When the desiccant inside the spacer bar saturates, the window fogs permanently and the low-E coating starts degrading. We replace the IGU, not the whole sash, when the frame is still sound, and we price that work in writing before ordering glass.
Corroded Frames and Failed Flashing
Original 1960s and 1970s aluminum frames in Union Park don’t just look tired. They pit, they oxidize, and they leave black streaks on siding. Worse, the original flashing was often just a bead of caulk that dried out decades ago. Repair here means pulling the old frame, replacing the flashing, and resetting the unit so water can’t wick behind the sheathing.
Window Replacement Company in Union Park
As a window replacement company working Union Park full time, we see the same story repeated block after block: original single-pane aluminum windows that sweat in July and rattle through August storms. Full-frame replacement here typically runs $900 – $2,200 per opening, including the new window, jamb rebuild where needed, fresh flashing, and the Orange County permit. Insert replacement, where the new window slips inside the existing frame, runs $600 – $1,400 per opening and makes sense when the original jamb is still dry and square.
Full-Frame vs. Insert on 1970s Frame Construction
Union Park’s 1970s-80s frame-built homes often hide water damage behind the original window flanges. A full-frame replacement lets us expose the rough opening, repair any rot, and install a properly flashed, impact-rated unit that will actually hold up. An insert over a compromised jamb just hides the problem.
Impact-Rated Replacement for Wind Mitigation
Above the 30-foot mounting height or in any opening where wind-borne debris is a real threat, impact-rated replacement windows with large-missile ratings are the right call. We install PGT WinGuard and other Florida Product Approved lines with Miami-Dade NOA stickers on every frame, so your wind mitigation report doesn’t get kicked back by an insurance underwriter.
Trusted Brands We Service in Union Park
We install and service ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru products, among eight lines we carry through the Relay Home Co. network. For Union Park customers, that means we’re not married to one brand’s quirks. If a Mr-Glass sliding door needs a new roller assembly, we source it fast. If a Therma-Tru entry door frame shifts, we reset it. Local parts availability for Union Park jobs comes down to our stock depth, not a distributor’s lead time, so replacement windows and repair components turn around quickly. Check our Window Replacement page for a bigger picture of how we source and install across the product lines.
Common Window Replacement Problems We See in Union Park Homes
- Original bronze aluminum frames from the 1960s. The bronze finish looks fine from the curb, but the weep holes are clogged and the corners are pitting. Once water can’t drain, it find its way past the frame and into the wall cavity.
- Failed wind mitigation inspections after cheap installs. Windows are impact-rated, but the contractor didn’t pull the Orange County permit or left off the NOA sticker. Without that paperwork, the insurance discount disappears.
- Second-story openings with the wrong missile rating. A non-impact low-E unit meets energy code but fails the large-missile requirement for higher openings. The homeowner thinks they’re protected. They’re not.
- 1970s frame construction with hidden rot. The drywall looks fine, but the sheathing behind the old flange is soft. By the time you see stains, the repair costs double. We catch it during replacement, not a year later.
Pricing for Window Replacement in Union Park, FL
Here are the ranges we quote in Union Park, in writing, before any work begins:
- Insert replacement: $600 – $1,400 per window
- Full-frame replacement: $900 – $2,200 per window
- Impact-rated window (large-missile, full-frame): $1,400 – $3,200 per window
- Repair (IGU replacement, hardware, flashing): $180 – $900 depending on scope
What moves the number: impact rating (small-missile vs. large-missile), glass package (double-pane low-E vs. triple-pane), frame material (vinyl vs. thermally broken aluminum), and how much jamb or framing work the opening needs. We’ll put it all in a line-item quote so you see exactly what you’re paying for. Call (850) 679-8554 to schedule a free estimate in Union Park.
We Also Serve Cities Near Union Park
Our crews work throughout Orange County, including Window Replacement in Union Park and the surrounding cities of Orlando, Kissimmee, Altamonte Springs, and Clermont. Same written pricing. Same permit and inspection standards. Same 365-Day Done Right Promise. Scheduling and dispatch for Union Park jobs coordinate from our South Florida office, while local crews handle the install.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Union Park
Union Park sits in Orange County’s wind-borne debris region with a design wind speed of 130 mph (Risk Category II), which means replacement windows in existing homes must meet Florida Product Approval and either a large-missile or small-missile impact rating depending on mounting height. Windows installed 30 feet or less above grade in a Risk Category II building can generally use small-missile rated products, but second-story and higher openings require large-missile ratings. We spec every Union Park job to the exact opening height and orientation, and each frame gets a Miami-Dade NOA sticker. Call (850) 679-8554 and we’ll confirm what rating your specific openings need.
Yes, because Union Park’s housing stock skews older than some surrounding areas. The 1950s-60s ranch homes and 1970s-80s frame builds here carry original aluminum-frame windows that Orlando’s newer subdivisions replaced years ago. Humid subtropical conditions accelerate seal failure, frame warping, and glass seal breakage, especially when those original windows were never built for the moisture load. Black oxidation streaks on siding are the tell. In Union Park we regularly replace sashes that have been sweating and pitting for 40 years, where a newer Orlando development might still be on its first post-construction replacement cycle.
Impact-rated replacement windows with documented Florida Product Approval and Miami-Dade NOA stickers can earn you a wind mitigation credit on insurance, but only if the Orange County final inspection is on file. The credit hinges on paperwork, not just product. If a contractor installs impact-rated glass but never pulls the permit or fails the final inspection, the insurance discount gets denied and the whole job has to be re-certified. We handle the permit, the inspection, and the documentation, so your report is clean and your premium adjustment actually goes through. Call (850) 679-8554 for a quote that includes the full permit and inspection path.
Yes, window replacement in Union Park requires an Orange County building permit when the opening is being altered, which includes full-frame replacements and any insert that changes the rough opening. A straight insert into an existing, unaltered frame may not require one. We pull the permit, schedule the final inspection, and keep the record current. When the job is done, you get the final inspection approval and all the product approval documentation. That’s what a compliant quote includes. A cheap quote that skips the permit skips your protection too.
For Union Park’s heat, humidity, and wind exposure, we lean on ES Windows for thermally broken aluminum frames with strong sightlines, ECO Window Systems for budget-conscious impact-rated vinyl, and PGT WinGuard where large-missile ratings are required and the budget allows. The right pick depends on your home’s exposure, opening height, and whether you’re chasing a wind mitigation credit. We’ll spec it honestly and show you the numbers for each option in writing. Call (850) 679-8554 and we’ll walk you through it.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Union Park and Orange County.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.