New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Union Park
Window installation in Union Park runs about $450 to $1,900 per opening for most retrofits, and we typically complete a standard single-family job in two to four days once the county permit clears. Juniper Windows Orlando handles everything from a single picture window on a 1960s ranch to full-house impact-rated replacement across an acreage lot. We know Union Park means unincorporated Orange County, which means county permitting, septic setbacks, and long hauls that a city contractor never thinks about. Call (850) 679-8554 to schedule your free estimate.
Our window crews are in Union Park weekly. We know the side streets off Dean Road, the older ranch blocks near Econlockhatchee Trail, and the easement headaches on the larger lots south of University Boulevard. That local familiarity means we spec the right glass, plan for the right truck access, and don’t get surprised by a county inspector’s questions about drain field setbacks.
Why Juniper Windows Orlando Is Union Park’s Preferred Window Installation Company
Union Park homeowners call us because we write the price down before anything gets ordered. No vague estimate that doubles at the door. Juniper Windows Orlando locks the number, the product line, and the scope in writing before a single screw turns. Sean Mackey leads our window and door operation, and he holds every project to the same standard we’ve run since 2001 under the Relay Home Co. family.
The 365-Day Done Right Promise covers every installation in Union Park: if the work isn’t right, we make it right, parts and labor, for a full year. In writing. Our technicians are background-checked and uniformed, and you track your crew’s arrival time live like a rideshare. We send before-and-after photos. You pay a digital invoice from a link. That’s the Relay Standard, and it’s how every Union Park job runs.
We answer the phone live, 24/7. No voicemail maze. When a homeowner near Union Park Elementary calls about a leaking bay window at 9 p.m., a real person picks up. That matters more out here than people realize.
Picture Window in Union Park
A picture window in Union Park is a fixed, non-operable unit chosen for a wide, uninterrupted view across an acreage lot, a front lawn, or a rear pasture line. These jobs most often show up on 1950s and 1960s ranch homes where a single large fixed pane replaced an aluminum double-hung, and now the original frame is corroded and the seal is gone. In Union Park, picture window installation typically runs $650 to $1,900 per opening depending on width, impact-rating, and whether the county requires the new lintel or header reinforcement.
Oversized Panes and County Setbacks
Many older Union Park ranchers sit on septic systems, meaning any window that protrudes, expands, or changes the exterior wall face can bump against Orange County’s drain field setback rules. We check the surveyed site plan before we quote, because a picture window that fits the living room wall sometimes needs to shift toward the rear or side to keep the county happy. It changes the price, not the view.
Low-E and UV Protection on Acreage Lots
Union Park’s open lots mean long, direct sun exposure on east and west walls. We spec picture windows with low-E glazing and, on the big west-facing pane over a backyard, an impact-rated laminated unit that cuts UV fade and heat build-up. The cost difference is real, but so is the difference in the house’s afternoon temperature.
Bay Window Installation in Union Park
Bay window installation in Union Park means extending a seating or garden bump-out from a 1950s ranch’s front room or side kitchen wall, usually replacing a corroded aluminum picture unit that has been leaking for years. These are the jobs where we most commonly see black oxidation streaks down the siding and rotted jamb wood underneath. Expect to pay $1,800 to $4,400 for a three-panel bay in Union Park, with impact-rated glazing and new flashing as the biggest cost drivers.
Flashing and Water Intrusion
Improperly flashed bay windows on these older Union Park homes leak at the jamb, and that water goes somewhere: into the wall cavity. When we remove an old bay, we’re usually repairing framing rot before we set the new unit. Our crews flash the top pan, the seat board, and the side jambs as a system, not as three separate tasks. That’s the difference between a 10-year window and a 30-year window.
Roof and Soffit Tie-Ins on Ranch Homes
A bay window with its own mini-roof needs to tie into the existing soffit and fascia cleanly, or it looks bolted on. On Union Park’s low-pitch ranch roofs, we often rebuild the soffit return and extend the drip edge so the bay reads as part of the original house. The extra framing and finish work adds a few hundred dollars, but it’s what separates a clean install from an obvious add-on.
Trusted Brands We Service in Union Park
We install and service windows from CWS, ES Windows, ECO Window Systems, and Mr-Glass, among the eight product lines we carry. Because we stock local parts for Union Park jobs, we don’t wait on a slow distributor run from across town when a sash clip or balance shoe fails. If a CWS picture window needs a replacement operator or a Mr-Glass slider has a broken latch, we get it handled quickly. For Union Park homeowners, that means one call covers product support, part availability, and the installation labor.
Common Window Installation Problems We See in Union Park Homes
- Corroded aluminum frames on 1950s-60s ranch houses. Original single-pane aluminum windows leave black oxidation streaks on siding and rattle in summer thunderstorms. By replacement time, the jamb screws often snap during removal and the rough opening needs nailer repair before a new unit can go in.
- Permit delays from county reviews tied to septic and drain field setbacks. A bay bump-out or a larger picture window on an acreage lot can require a revised site plan. We handle the county paperwork and scope the window size around the setback before quoting, not after.
- Long material hauls on narrow easements and unpaved driveways. Large-missile-rated impact panes can break in transit if the truck can’t navigate a muddy easement after heavy rain. We plan delivery access on the first visit, not the morning of the install.
- Water intrusion at the jamb from improperly flashed windows. Union Park’s heavy thunderstorms push water behind old flashing and into wall cavities. We see the rotted framing when we pull the old unit, and we repair it before the new window goes in.
Pricing for Window Installation in Union Park, FL
A standard retrofit window in Union Park runs $450 to $900 per opening for a single-hung or double-hung without impact glazing. Impact-rated units add $150 to $400 per opening depending on the glass package. Picture windows run $650 to $1,900. Bay windows run $1,800 to $4,400. A full 1970s frame house with 14 openings and impact-rated replacements across the board falls between $12,000 and $22,000 in Union Park’s current market.
What moves the price: glass spec, frame size, permitting complexity on septic lots, and whether the truck can reach the house without special handling. We give you a written price for every part of the job before ordering anything. Call (850) 679-8554 to schedule your free estimate.
We Also Serve Cities Near Union Park
Juniper Windows Orlando handles Window Installation across the greater Orlando metro. Beyond Union Park, we serve Orlando, Kissimmee, Altamonte Springs, and Clermont with the same written pricing and 365-Day Done Right Promise.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Union Park
Yes. Union Park sits in unincorporated Orange County, so window installation permits and inspections come from the county, not the City of Orlando. Any replacement that changes the opening size, structural header, or exterior wall penetration needs a county permit. A same-size retrofit usually doesn’t, but we flag it during the free estimate either way. Call (850) 679-8554 and we’ll check your specific lot and opening against Orange County’s current code.
Maybe, but the county will want to know where your septic tank and drain field sit before approving the bump-out. If the proposed bay extends close to a setback line, you may need a revised site plan, and you may have to shift the bay toward the rear or side yard. We pull the survey and talk through the options before you spend anything. Call (850) 679-8554 for a free estimate that includes the permit path.
For those original bronze aluminum windows, we recommend impact-rated casement or fixed units with a low-E insulated glass package. The original frames have no thermal break and the seals are gone, so the glass is doing nothing for heat or humidity. Impact-rated glazing handles Union Park’s storm-driven rain and wind-borne debris without shattering. Pricing runs $750 to $1,600 per opening on that housing stock depending on size and glass spec. Call (850) 679-8554 to get exact numbers.
Long hauls from Orlando-area suppliers add to pricing only when the delivery truck can’t reach the house directly. If your acreage lot has a narrow easement, an unpaved driveway that turns to mud, or low-hanging limbs over the access path, large impact-rated panes may need a smaller truck and extra handling time. We scope the access on the first visit and include any delivery surcharge in the written quote. Call (850) 679-8554 for a free estimate that accounts for your actual driveway, not a generic assumption.
Yes, in most cases. Impact-rated windows and doors on every opening meet Florida’s wind-borne debris protection requirements and can lower your wind insurance premium, though the exact amount depends on your carrier and the age of your roof and other structural factors. We install impact-rated units from CWS, ES Windows, and ECO Window Systems, among others. Call (850) 679-8554 for a quote on full-home impact coverage.
Written by Sean Mackey, Owner at Juniper Windows Orlando, serving Union Park and surrounding Orange County communities.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.