New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Mount Dora
Window installation in Mount Dora runs roughly $550 – $1,500 per opening for a standard retrofit, and $900 – $2,800 per opening when the job calls for full-frame replacement with trim and weatherproofing. Those numbers move based on what we find behind the old frame, but they don’t move after we write the quote. We serve Mount Dora homeowners from the historic district to the 1970s block ranch ring around Lake Dora, and every job starts with a written price and a live arrival time you can track on your phone. Call (850) 679-8554 to schedule your free estimate.
Why Juniper Windows Orlando Is Mount Dora’s Preferred Window Installation Company
We’re not a general contractor that also does windows. Window Installation is what we do, and Mount Dora’s housing stock demands that focus. Our crews know what a 1926 Tremain Street wood frame needs versus what a 1978 concrete block ranch on the west side needs, and we don’t pretend those are the same job.
Sean Mackey leads our operation, and he’s built the brand around one habit that Mount Dora Window Replacement customers notice immediately: we answer the phone. A live person picks up, 24/7, not a callback queue. When you book, you get a live arrival time, before-and-after photos of the work, and a digital invoice you can pay from a link. That’s the Relay Visibility Guarantee, and it’s how every job here runs.
Our reputation in Mount Dora rests on the 365-Day Done Right Promise: if the installation isn’t right, we make it right, parts and labor, in writing, for a full year. We also commit to a free second visit if a repair fails, no charge, no argument. Those aren’t slogans. They’re the terms on every project we do in town.
Casement Windows in Mount Dora
Casement windows in Mount Dora are the workhorse for lakeview rooms and rear elevations where you want full, unobstructed glass and a tight seal against summer thunderstorms. These units hinge at the side and crank outward, so they close tighter against wind than sliding or double-hung designs. In a climate with driving rain and hurricane gusts, that compression seal matters.
Impact-Rated Glass and Water Management
We install casement windows with impact-rated glazing built to resist wind-borne debris without shattering, and we spec a design pressure rating that exceeds the 140 mph wind zone Mount Dora sits in. Flashing and sill pan details matter more than the glass itself when water is hitting the frame horizontally. We set every unit on a sloped, waterproofed sill, then seal the perimeter with backer rod and a color-matched sealant.
What Homeowners Pay
A standard casement retrofit in Mount Dora runs $700 – $1,500 per unit depending on size and glass package. Custom architectural casement windows with wood interiors on the historic side of town can push toward $2,800 or more, driven by millwork and glazing lead times rather than labor.
Double Hung Windows in Mount Dora
Double hung windows in Mount Dora are the default replacement for the original single-pane wood sash units dominating the downtown historic district, but they also show up in 1970s concrete block ranches where aluminum single-hungs have finally failed. Both sashes move on modern double hung units, which means better airflow for Florida spring and fall, plus easier cleaning from inside on second-story bedrooms.
Compliance on Street-Facing Elevations
Here’s where Mount Dora is different from most of Central Florida: the city’s historic preservation rules control visible street-facing fenestration in the 1920s district. That often means exact-size wood sash restoration or custom double-hung replacements that match the original sightlines, muntin profiles, and trim. We pull the approvals before ordering, so the glass and millwork don’t arrive out of compliance.
Pricing for Double Hung Installs
Off-the-shelf vinyl double hung retrofits in Mount Dora run $550 – $1,100 per window. Custom wood double hung units sized to an original 1920s opening with period hardware and glazing run $1,500 – $2,800. The spread is wide because the two jobs use different products, different fastening methods, and different lead times.
Trusted Brands We Service in Mount Dora
We carry and install eight product lines, including ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru. That breadth lets us match a historic wood profile on one elevation and an impact-rated contemporary unit on another without switching contractors. We also keep common replacement parts in stock for Mount Dora customers, including roller assemblies, balance springs, and weatherstripping, so repair turnarounds stay short.
Common Window Installation Problems We See in Mount Dora Homes
- Historic district rework. A homeowner orders custom trim or glass without clearing the city’s street-facing approval first, then fails final inspection. We’ve seen this delay projects by weeks and force replacement of already-built units. Submitting the fenestration plan before ordering is a simple step that saves thousands.
- Rotted sub-frames behind block walls. Prolonged humidity near Lake Dora means wood buck and jamb extensions behind older aluminum frames quietly rot. When we pull the old window, we often find the rough opening needs re-framing before the new unit goes in. Skipping that leaves air leaks and water intrusion behind a fresh install.
- Bowed sliding door tracks. 1980s aluminum sliding glass doors on western exposures carry bent tracks from thermal expansion against concrete slabs. New impact-rated glazing doesn’t fix the track, and chronic roller failure returns within a year. We address the track and slab condition when we install the door, not after.
- Mismatched glass packages on the same house. A 1920s wood frame gets street-facing custom double hungs and rear-facing impact casements. Different elevations need different compliance paths, and ordering both from one installer who knows the city’s rules avoids a house that looks patched together.
Pricing for Window Installation in Mount Dora, FL
You should be able to ballpark a window project without calling anyone. Standard vinyl retrofit windows in Mount Dora run $550 – $1,100 per opening for double hung units. Casement windows run $700 – $1,500. Full-frame replacement with new trim, flashing, and interior casing carries a 20 – 30% premium over retrofit pricing because it involves removing the old frame and re-securing the rough opening. Custom historic-district work with wood interiors runs $1,500 – $2,800 per window, driven by millwork and architectural glass lead times. Every quote we write is fixed before a single screw turns, no change orders. Call (850) 679-8554 to schedule your free estimate.
We Also Serve Cities Near Mount Dora
Beyond Mount Dora, our crews handle window installation across Ocoee, Lake Mary, Clermont, and Altamonte Springs. If you’re in one of those towns or elsewhere around the Central Florida lake region, you get the same written pricing and live arrival time.
Serving Mount Dora, FL - Our Local Coverage Area
We’re based in the Mount Dora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Mount Dora
They add anywhere from two weeks to two months, depending on when your street-facing fenestration plan lands on the city’s review calendar. The rules apply to visible elevations in the downtown district, not the interior. We submit the approval package before ordering glass or millwork, so the stopwatch starts while materials are still in queue. Call (850) 679-8554 and we’ll map your specific timeline for free.
Yes. On the rear and side elevations, PGT impact-rated casement windows carry a Miami-Dade NOA and a design pressure above 140 mph, and they read contemporary. On the street-facing elevation where the city wants period sightlines, custom wood double hungs with laminated impact glass can keep the original profile and still perform. It’s a dual-compliance path we handle regularly.
Because the aluminum track underneath is often bowed from years of thermal expansion against the concrete slab. The new glass sits in the same bent track, and roller failure returns. We inspect the track and slab when we install the door, and we correct the mounting surface before the new unit goes in. Call (850) 679-8554 if your door is rolling rough.
Yes, and the bigger jump comes from low-E coatings and a tighter air seal, not the impact rating itself. Single-pane aluminum windows in a 1970s block ranch leak conditioned air around the frame and transmit heat through the glass. Impact-rated units with insulated glazing and modern weatherstripping cut that transfer significantly, especially on west-facing and lake-facing elevations.
Not usually. The product choice matters more than the wall type. Concrete block homes from the 1960s-80s typically take retrofit vinyl or impact windows with direct-mount flanges, while 1920s wood frames need full-frame replacement with custom trim and flashing. The difference is in the installation method and the rough opening prep, not the window series itself. Ask us during the free estimate and we’ll show you photos of both.
Written by Sean Mackey, Owner at Juniper Windows Orlando, specializing in Window Installation across Mount Dora, FL.
Six Reasons Homeowners Choose Juniper Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.